Disparador de derivación de la serie CQAX2 + Interruptor auxiliar
El CQAX2 El interruptor auxiliar de desconexión de shunt está especificado para la desconexión y el interruptor auxiliar combinados. Los datos publicados incluyen circuitos de señal de CA 230 V y DC 110 V; Ui 415 V y rango de operación de shunt de 160 a 260 V. Confirme la compatibilidad con la interfaz del accesorio, el circuito de control, la instalación y los requisitos del mercado de destino antes de realizar la orden.
Descripción del producto
CQAX2 is a shunt trip auxiliary switch for low-voltage panel and breaker accessory systems. The summary below uses the published model record; it does not replace the complete drawing, wiring instructions or project design review.
Combined shunt release and auxiliary switch. shunt operating range 160–260V is the published electrical reference. Compatibility, contact logic and installation details must be confirmed for the exact ordered version.
Características clave
Aplicaciones típicas
Use it where a compatible breaker must be tripped from a remote control or emergency circuit. Confirm the control voltage, trip logic, accessory interface and safe isolation procedure; a shunt release is not an undervoltage release.
Guía de Solicitudes y Selección
Use the product-specific values below as a shortlist, then validate the complete circuit and mechanical interface. An accessory rating alone does not establish compatibility with every breaker, panel or control system.
| Punto de selección | CQAX2 reference | Lo que el proyecto debe confirmar |
|---|---|---|
| Primary function | liberación combinada del shunt y interruptor auxiliar | Confirm the required signal or protection function before ordering |
| Electrical reference | Circuitos de señal de CA 230V / CC 110V; Ui 415V | Match the project control or supply circuit |
| Rating / operating window | Rango de funcionamiento del shunt 160–260V | Use the published range; do not infer missing ratings |
| Interface | para la interfaz de accesorios compatibles con el interruptor | Verify the compatible breaker, panel, base or rail interface |
| Wiring | Referencia del conductor de 1 × 2,5 mm² | Final conductor and protection selection follows the project design and local rules |
| Documentos | IEC 60947-5-1 | Request the exact drawing and applicable compliance documents for the ordered version |
Function and signal path
Combined shunt release and auxiliary switch. Confirm whether the circuit needs status feedback, fault alarm, remote trip or voltage release.
Control-circuit fit
AC 230V / DC 110V signal circuits; Ui 415V. Match the control voltage and operating window to the project circuit; never assume a nearby rating is interchangeable.
Mechanical interface
for compatible breaker accessory interface. Confirm breaker family, rail/base or panel interface, clearances and maintenance access.
Wiring and documentation
1 × 2.5mm² conductor reference. Request the exact drawing and installation document for the ordered configuration.
Guía de pedidos
- Specify the exact model and accessory function: CQAX2, combined shunt release and auxiliary switch.
- State the control/supply voltage and any required operating window.
- Confirm the compatible breaker family, panel, base or DIN-rail interface.
- Provide quantity, destination market, wiring details and required technical documents.
- Ask CHAC to verify any non-standard marking, packaging or configuration request before production.
Comprobaciones de Instalación y Coordinación
- Use the exact product drawing and installation instructions for the ordered configuration.
- Verify voltage, conductor, terminal, enclosure, clearances and maintenance access.
- Check the accessory’s signal or trip logic against the control circuit and upstream/downstream protection.
- Installation, testing and maintenance must be carried out by qualified personnel under applicable rules.
Designación del tipo
Dimensiones(mm)
Especificaciones técnicas
| Parámetro | ||
| AC-15 | Voltaje Operacional Nominal | CA 230V 50Hz |
| Tensión nominal de aislamiento | 415V | |
| DC-13 | Voltaje Operacional Nominal | DC110V |
| Corriente nominal de operación | 1A | |
| Características de Operación | Cuando el voltaje está entre 160-260V, la unidad de disparo puede operar de manera confiable. | |
| Vida Mecánica | No menos de 4.000 operaciones. | |
| Estándares | GB/T 14048.5. IEC 60947-5-1 | |
Requisitos del conductor y sección transversal
| Sección transversal de cobre (mm²2) |
| 1X2.5 |
¿Por qué elegir CHAC?
Con más de 30 años de experiencia en fabricación, más de 1100 empleados, más de 100 millones de postes
Con una capacidad anual y un proceso de producción automatizado 90%, CHAC ofrece una capacidad de producción estable y un estricto
control de calidad para clientes OEM/ODM globales. Nuestro sistema de fabricación interno respalda a largo plazo
Cooperación para marcas eléctricas, importadores y distribuidores.
30+
AÑOS DE EXPERIENCIA
Especializado en fabricación eléctrica de bajo voltaje
1100+
EMPLEADOS
Equipo profesional garantiza calidad y entrega estables
100M+
CAPACIDAD ANUAL DE LOS POLOS
Capacidad de producción a gran escala para satisfacer la demanda mundial
90%
PRODUCCIÓN AUTOMATIZADA
Automatización avanzada para alta eficiencia y consistencia
Línea de ensamblaje automatizada
Laboratorio de pruebas
Inyección y Estampado
Inspección de calidad
Un estricto sistema de control de calidad garantiza que cada producto cumpla con los estándares mundiales.
¿Qué podemos personalizar?
For CQAX2 projects, CHAC can review private-label marking, packaging, approved electrical options, accessory interface and technical-document requirements. Requests outside the published range are subject to engineering evaluation, testing, MOQ and project feasibility.
Logotipo y marca
Private-label marking and nameplate options are subject to artwork review and sample approval.
Empaquetado
Personalización
Cartons, labels and manuals can be prepared for the approved order specification and destination market.
Eléctrico
Personalización
Published AC 230V / DC 110V signal circuits; Ui 415V, shunt operating range 160–260V and interface options are reviewed against the ordered CQAX2 configuration; non-standard requests require technical evaluation.
Producto
Apariencia
Appearance options can be reviewed subject to tooling, MOQ, marking requirements and technical feasibility.
Certificación
Apoyo
Datasheets, drawings and verified document information are supplied for the applicable approved configuration.
Ingeniería
Desarrollo
Project support may include drawing review, sample evaluation, testing and production planning, subject to technical approval.
Descargar
CQAX2 Technical Documents
Request the current datasheet, drawings, wiring information and applicable documents for the ordered accessory configuration.
¿Necesita documentos técnicos?
Contáctenos para obtener hojas de datos, certificados, planos, orientación de selección o soporte para proyectos OEM/ODM.
CQAX2 Product FAQ
What is the CQAX2 used for?
The CQAX2 provides remote shunt tripping for a compatible breaker system. It is selected as a control accessory, not as a standalone overcurrent device.
What is the difference between a shunt trip and an undervoltage release?
A shunt trip is generally energize-to-trip, while an undervoltage release responds to a loss or reduction of its control voltage. Confirm the required trip logic for the project.
What control voltage does the CQAX2 use?
The published reference is AC 230V / DC 110V signal circuits; Ui 415V, with shunt operating range 160–260V. Do not substitute another coil voltage without confirming the exact model.
Which breaker is compatible with the CQAX2?
The product record specifies a compatible for compatible breaker accessory interface. Confirm the breaker model, interface and accessory combination from the drawing.
Can a shunt release provide overload protection?
No. It trips a compatible breaker remotely; overload and short-circuit protection come from the breaker and must be selected separately.
What wiring is listed for the CQAX2?
The published conductor reference is 1 × 2.5mm² conductor reference. Final wiring, isolation and control-circuit protection must follow the project design and instructions.
Confirm the Right CQAX2 Configuration
Share the required function, voltage, interface, quantity, destination market and technical documents. CHAC will review the request against the published accessory data.
