Contact auxiliaire CQAF2 pour signalisation
Le CQAF2 Contact auxiliaire spécifié comme contact auxiliaire mécanique pour l'indication d'état du disjoncteur. Les données publiées incluent AC 230V 50Hz / DC 110V et AC-15 230V 6A ; DC-13 110V 1A. Confirmer l'interface de l'accessoire, le circuit de commande, le câblage et les exigences du marché de destination avant de commander.
Vue d'ensemble du produit
CQAF2 is a auxiliary contact for low-voltage panel and breaker accessory systems. The summary below uses the published model record; it does not replace the complete drawing, wiring instructions or project design review.
Mechanical auxiliary contact for breaker status indication. AC-15 230V 6A; DC-13 110V 1A is the published electrical reference. Compatibility, contact logic and installation details must be confirmed for the exact ordered version.
Principales caractéristiques
Applications typiques
Use it where a low-power status signal is needed for panel indication, PLC, BMS or interlocking logic. Confirm the required contact function and the target breaker's accessory interface before specifying the device.
Demandes d’admission et guide de sélection
Utilisez les valeurs spécifiques au produit ci-dessous comme liste de critères, puis validez le circuit complet et l’interface mécanique. Une simple évaluation des accessoires ne garantit pas la compatibilité avec tous les interrupteurs, tableaux ou systèmes de contrôle.
| Point de sélection | CQAF2 reference | Ce que le projet doit confirmer |
|---|---|---|
| Fonction principale | contact auxiliaire mécanique pour indication d'état de disjoncteur | Confirmer la fonction de signalisation ou de protection requise avant de passer commande |
| Réflecteur électrique | AC 230V 50Hz / DC 110V | Complétez le circuit de commande ou de fourniture du projet |
| Écran de lecture/fonctionnement | AC-15 230V 6A; DC-13 110V 1A | Utilisez la plage publiée ; n’en déduisez pas les évaluations manquantes |
| Interface | installé en tant qu'accessoire modulaire avec le disjoncteur compatible | Vérifiez l’interface compatible entre le disjoncteur, le panneau, le socle ou le rail |
| Câblage | non indiqué sur la fiche produit | La sélection du conducteur final et de la protection s’effectue en fonction de la conception du projet et des règles locales. |
| Documents | GB/T 14048.5 et CEI 60947-5-1 | Demandez le dessin exact et les documents de conformité applicables pour la version commandée. |
Fonctionnement et chemin de signalisation
Mechanical auxiliary contact for breaker status indication. Confirm whether the circuit needs status feedback, fault alarm, remote trip or voltage release.
Compatibilité du circuit de commande
AC 230V 50Hz / DC 110V. Match the control voltage and operating window to the project circuit; never assume a nearby rating is interchangeable.
Interface mécanique
installed as a modular accessory with the compatible breaker. Confirm breaker family, rail/base or panel interface, clearances and maintenance access.
Wiring and documentation
not stated on the product record. Request the exact drawing and installation document for the ordered configuration.
Guide d'achat
- Specify the exact model and accessory function: CQAF2, mechanical auxiliary contact for breaker status indication.
- State the control/supply voltage and any required operating window.
- Confirm the compatible breaker family, panel, base or DIN-rail interface.
- Provide quantity, destination market, wiring details and required technical documents.
- Ask CHAC to verify any non-standard marking, packaging or configuration request before production.
Installation and Coordination Checks
- Use the exact product drawing and installation instructions for the ordered configuration.
- Verify voltage, conductor, terminal, enclosure, clearances and maintenance access.
- Check the accessory’s signal or trip logic against the control circuit and upstream/downstream protection.
- Installation, testing and maintenance must be carried out by qualified personnel under applicable rules.
Type designation
Dimensions(mm)
Technical Specifications
| Parameter | ||
| AC-15 | Rated Operational Voltage | AC 230V 50Hz |
| Rated operating current | 6A | |
| DC-13 | Rated Operational Voltage | DC110V |
| Rated operating current | 1A | |
| Mechanical Life | 10000 | |
| Standards | GB/T 14048.5, IEC 60947-5-1 | |
Pourquoi choisir CHAC
With 30+ years of manufacturing experience, 1100+ employees, 100M+ poles
annual capacity and 90% automated production, CHAC provides stable production capacity and strict
quality control for global OEM/ODM customers. Our in-house manufacturing system supports long-term
cooperation for electrical brands, importers and distributors.
30+
ANNÉE D'EXPÉRIENCE
Spécialisée dans la fabrication d'appareils électriques à faible tension
1100+
EMPLOYÉS
Une équipe professionnelle garantit une qualité et une livraison stables
100 millions d'euros
Capacité annuelle des poteaux
Capacité de production à grande échelle pour répondre à la demande mondiale
90%
PRODUCTION AUTOMATIQUE
Une automatisation avancée pour une efficacité et une cohérence élevées
Ligne de montage automatisée
Laboratoire d'essai
Injection et estampage
Inspection de qualité
Strict quality control system ensures every product meets global standards.
Qu'est-ce que nous pouvons personnaliser ?
For CQAF2 projects, CHAC can review private-label marking, packaging, approved electrical options, accessory interface and technical-document requirements. Requests outside the published range are subject to engineering evaluation, testing, MOQ and project feasibility.
Logo et identité visuelle
Private-label marking and nameplate options are subject to artwork review and sample approval.
Emballage
Personnalisation
Cartons, labels and manuals can be prepared for the approved order specification and destination market.
Électrique
Personnalisation
Published AC 230V 50Hz / DC 110V, AC-15 230V 6A; DC-13 110V 1A and interface options are reviewed against the ordered CQAF2 configuration; non-standard requests require technical evaluation.
Produit
Apparence
Appearance options can be reviewed subject to tooling, MOQ, marking requirements and technical feasibility.
Certification
Support
Datasheets, drawings and verified document information are supplied for the applicable approved configuration.
Ingénierie
Développement
Project support may include drawing review, sample evaluation, testing and production planning, subject to technical approval.
Télécharger
CQAF2 Technical Documents
Request the current datasheet, drawings, wiring information and applicable documents for the ordered accessory configuration.
Need Technical Documents?
Contact us for datasheets, certificates, drawings, selection guidance or OEM/ODM project support.
CQAF2 Product FAQ
What is the CQAF2 used for?
The CQAF2 is a mechanical auxiliary contact for low-power breaker status indication. It can support signaling or monitoring circuits when the compatible breaker and contact arrangement are confirmed.
What is an auxiliary contact in a circuit breaker?
An auxiliary contact provides a separate low-power status signal for functions such as panel indication, PLC/BMS feedback or interlocking. It is different from the breaker load contacts.
What electrical ratings are published for the CQAF2?
The published ratings are AC-15 230V 6A; DC-13 110V 1A with AC 230V 50Hz / DC 110V. Confirm the control-circuit category and wiring against the exact drawing.
Which breaker is the CQAF2 compatible with?
The product record describes the CQAF2 as a modular accessory for a compatible breaker family. Confirm the exact breaker model, side/interface position and accessory combination before ordering.
Does an auxiliary contact provide overload protection?
No. An auxiliary contact provides information; it does not replace the breaker or add overload, short-circuit or residual-current protection.
What should be checked before installing the CQAF2?
Check the accessory interface, contact function, AC 230V 50Hz / DC 110V, conductor information and the installation document. Work must be performed by qualified personnel.
Confirm the Right CQAF2 Configuration
Share the required function, voltage, interface, quantity, destination market and technical documents. CHAC will review the request against the published accessory data.
