{"id":3401,"date":"2026-08-06T12:50:00","date_gmt":"2026-08-06T12:50:00","guid":{"rendered":"https:\/\/chac-electric.com\/?p=3401"},"modified":"2026-10-14T06:50:10","modified_gmt":"2026-10-14T06:50:10","slug":"distribution-board-way-count-rfq-guide","status":"publish","type":"post","link":"https:\/\/chac-electric.com\/fr\/blog\/distribution-board-way-count-rfq-guide\/","title":{"rendered":"Guide de demande de devis pour les programmes de panneaux selon la m\u00e9thode de r\u00e9partition des c\u00e2bles RFQ"},"content":{"rendered":"

Way count is the physical space and circuit-capacity decision behind a distribution-board request. It is not simply the number of outgoing circuits. Module widths, incomers, residual-current devices, accessories, busbars, neutral terminals, cable entries and future expansion can all change the enclosure that a panel builder<\/a> needs.<\/p>\n

\"Guide<\/p>\n

What should the way count represent?<\/h2>\n

Begin with the approved device schedule and convert each protective or control device into its actual module width. Then add incomer equipment, metering, residual-current arrangements, segregation and the explicitly requested spare capacity. A circuit count and a module count are related, but they are not the same.<\/p>\n

Which schedule fields have the biggest effect?<\/h2>\n

Record pole count, device width, accessory blocks, RCBO or RCCB arrangement, neutral distribution, control modules and any special busbar requirements. The distribution-box range<\/a><\/strong> can be reviewed once these fields are known.<\/p>\n

\"CQMG05<\/p>\n

What enclosure constraints should be shown?<\/h2>\n

Show cable-entry direction, bend space, door clearance, mounting depth, environment, IP expectations and the service area needed for testing or replacement. Enclosure size cannot be inferred from way count alone.<\/p>\n

Why can thermal and wiring checks limit the board?<\/h2>\n

A full-looking rail does not prove that the assembly is thermally suitable. Check grouping, ambient temperature, loading diversity, conductor routing, neutral terminals and the assembly verification route. IEC 61439-1<\/a> provides a useful assembly context, while the current applicable edition and project requirements must be confirmed.<\/p>\n

What should a board request include?<\/h2>\n

Send the circuit schedule, single-line diagram, module widths, spare policy, enclosure constraints, incoming supply, busbar and neutral expectations, cable entries, labels, environment and requested document pack. State whether the quotation is for a complete assembly or only the enclosure and accessories.<\/p>\n

Which CHAC product route supports the first layout?<\/h2>\n

Utilisez le distribution and junction-box information<\/a><\/strong> to compare enclosure families, then confirm the exact dimensions and configuration against the drawing. Product pages should support, not replace, the assembly layout review.<\/p>\n

When should the way count be frozen?<\/h2>\n

Freeze it after the device schedule, spare policy, thermal assumptions and cable-entry plan have been approved. If RCBOs, metering or control accessories are still moving, keep the way count provisional so the panel is not purchased around an incomplete layout.<\/p>\n

A defensible distribution board<\/a> way count<\/strong> is the number that remains after device widths, accessories, wiring space and the assembly review are all represented on the layout.<\/p>\n

FAQ<\/h2>\n

What does way count mean in a board RFQ?<\/h3>\n

It is the planned number of outgoing ways plus any explicitly requested spare capacity on the assembly.<\/p>\n

Should spare ways be assumed by the supplier?<\/h3>\n

No. State spare policy as an explicit RFQ field.<\/p>\n

Can enclosure size be inferred from way count alone?<\/h3>\n

No. Cable entries, accessories, and service access also affect enclosure selection.<\/p>\n

How does this differ from a junction-box decision?<\/h3>\n

A junction-box versus distribution-box boundary is a different installation question; keep it on its own article inputs.<\/p>\n

What documents should accompany the RFQ?<\/h3>\n

Provide the device schedule, layout constraints, and the documentation pack required for the target market.<\/p>\n

When should way count be frozen?<\/h3>\n

Freeze it after the circuit schedule and spare policy are approved, before purchasing the enclosure family.<\/p>\n

R\u00e9f\u00e9rences<\/h2>\n