{"id":3466,"date":"2026-08-07T09:00:00","date_gmt":"2026-08-07T09:00:00","guid":{"rendered":"https:\/\/chac-electric.com\/blog\/rcbo-vs-rccb-selection-boundary\/"},"modified":"2026-10-14T06:50:02","modified_gmt":"2026-10-14T06:50:02","slug":"rcbo-vs-rccb-selection-boundary","status":"publish","type":"post","link":"https:\/\/chac-electric.com\/fr\/blog\/rcbo-vs-rccb-selection-boundary\/","title":{"rendered":"RCBO vs RCCB : Comment les constructeurs de panneaux distinguent la protection combin\u00e9e et la protection par division"},"content":{"rendered":"

Disjoncteur diff\u00e9rentiel<\/a> and RCCB selection is a protection-boundary decision. An RCBO combines residual-current and overcurrent protection in one documented device arrangement. An RCCB provides residual-current protection, while suitable overcurrent protection must be provided elsewhere. The right choice depends on how the single-line diagram divides circuits and neutral returns.<\/p>\n

\"RCBO<\/p>\n

Map the two protection functions before comparing devices<\/h2>\n

Mark where overload and short-circuit protection<\/a> are provided, which circuits share residual-current protection, and how each neutral returns. The RCBO product route<\/a><\/strong> and an RCCB route should be compared only after those functions are visible on the drawing.<\/p>\n

What is the functional difference between an RCBO and an RCCB?<\/h2>\n

An RCBO can isolate a single outgoing circuit for both residual-current and overcurrent events when the model is designed for that duty. An RCCB can protect a group against residual current, but downstream MCBs or another verified overcurrent arrangement are still required.<\/p>\n

Which circuit inputs expose the real duty split?<\/h2>\n

Record load type, rated current, neutral arrangement, residual-current type, prospective fault current, selectivity needs and the consequence of one device disconnecting several circuits. Electronic loads and variable-speed equipment may change the required residual-current waveform type.<\/p>\n

\"Disjoncteur<\/p>\n

How should the drawing keep the functions separate?<\/h2>\n

Show the overcurrent device, residual-current device, neutral bar and downstream circuit boundaries explicitly. Do not mix neutrals between independently protected RCBO circuits, and do not assume that an RCCB adds overcurrent protection.<\/p>\n

\"PXL9-63<\/p>\n

When can individual RCBOs improve circuit subdivision?<\/h2>\n

Individual RCBOs may be useful when the design wants one circuit\u2019s residual-current event to avoid interrupting unrelated circuits. A grouped RCCB-plus-MCB arrangement may still be suitable when the project accepts group interruption and the coordination is documented.<\/p>\n

What should a comparison request contain?<\/h2>\n

List the device function, rated current, poles and neutral treatment, residual-current type and sensitivity, breaking capacity, installation format, selectivity requirements and the evidence required for the target market. Keep sensitivity selection separate from the basic RCBO-versus-RCCB boundary.<\/p>\n

Which CHAC pages can support the shortlist?<\/h2>\n

Compare the CQB3LE-63 electronic RCBO<\/a> with the PXL9-63 leakage breaker<\/a><\/strong> only after confirming each model\u2019s documented function and configuration.<\/p>\n

Who owns the final protection boundary?<\/h2>\n

The responsible project designer owns the final choice. Use IEC 61008-1<\/a> et IEC 61009-1<\/a> as standards references, then verify the exact model, neutral routing, type and local installation requirements.<\/p>\n

The schedule should name the required Protection contre le courant r\u00e9siduel<\/strong> function and its neutral arrangement so that a supplier cannot replace an RCBO with an RCCB without exposing the missing overcurrent duty.<\/p>\n

FAQ<\/h2>\n

Is an RCBO simply an RCCB with a different name?<\/h3>\n

No. An RCBO is reviewed when residual-current and overcurrent functions are intended in one documented device arrangement.<\/p>\n

Can an RCCB replace an RCBO without redrawing the circuit?<\/h3>\n

Only if the approved design still provides the missing overcurrent duty elsewhere and the selected models support that arrangement.<\/p>\n

What drawing fields matter most in the comparison?<\/h3>\n

Residual-current duty, overcurrent duty, pole\/neutral arrangement, and shared downstream circuits.<\/p>\n

What should suppliers confirm in writing?<\/h3>\n

Exact model identification plus the documents that support only the duties requested in the RFQ.<\/p>\n

How does this differ from a sensitivity selection guide?<\/h3>\n

Sensitivity is a separate residual-current setting question; this article focuses on combined versus split device duties.<\/p>\n

Who owns the final protection boundary?<\/h3>\n

The responsible project electrical designer owns it using the approved drawings and selected-model evidence.<\/p>\n

R\u00e9f\u00e9rences<\/h2>\n