CQBE3 Alarm Bell for Industrial and Commercial Signaling
Il CQBE3 modular alarm bell is specified for audible electrical signaling. Published data includes 230V AC 50Hz and not stated as an ampere load rating on the product record. Confirm the accessory interface, control circuit, wiring and destination-market requirements before ordering.
Riassunto del prodotto
CQBE3 is a modular alarm bell for low-voltage panel and breaker accessory systems. The summary below uses the published model record; it does not replace the complete drawing, wiring instructions or project design review.
Audible electrical signaling. not stated as an ampere load rating on the product record is the published electrical reference. Compatibility, contact logic and installation details must be confirmed for the exact ordered version.
Principali caratteristiche
Applicazioni tipiche
Use it for audible signaling in a civil, commercial or industrial panel where a 230V AC bell circuit is required. Confirm the enclosure, sound-level requirement, wiring route and local installation rules because the product record does not state a dB or IP value.
Modulazioni e Guida alla selezione
Use the product-specific values below as a shortlist, then validate the complete circuit and mechanical interface. An accessory rating alone does not establish compatibility with every breaker, panel or control system.
| Punto di selezione | CQBE3 reference | Cosa deve confermare il progetto |
|---|---|---|
| Funzione principale | audible electrical signaling | Confirm the required signal or protection function before ordering |
| Electrical reference | 230V AC 50Hz | Match the project control or supply circuit |
| Rating / operating window | not stated as an ampere load rating on the product record | Use the published range; do not infer missing ratings |
| Interfaccia | modular installation; exact enclosure/interface must be confirmed | Verify the compatible breaker, panel, base or rail interface |
| Wiring | Referenza per conduttori da 1,5–2,5 mm² | Final conductor and protection selection follows the project design and local rules |
| Documents | non specificato nella scheda del prodotto | Request the exact drawing and applicable compliance documents for the ordered version |
Function and signal path
Audible electrical signaling. Confirm whether the circuit needs status feedback, fault alarm, remote trip or voltage release.
Control-circuit fit
230V AC 50Hz. Match the control voltage and operating window to the project circuit; never assume a nearby rating is interchangeable.
Mechanical interface
modular installation; exact enclosure/interface must be confirmed. Confirm breaker family, rail/base or panel interface, clearances and maintenance access.
Wiring and documentation
1.5–2.5mm² conductor reference. Request the exact drawing and installation document for the ordered configuration.
Guida all'ordine
- Specify the exact model and accessory function: CQBE3, audible electrical signaling.
- State the control/supply voltage and any required operating window.
- Confirm the compatible breaker family, panel, base or DIN-rail interface.
- Provide quantity, destination market, wiring details and required technical documents.
- Ask CHAC to verify any non-standard marking, packaging or configuration request before production.
Controlli di installazione e coordinamento
- Use the exact product drawing and installation instructions for the ordered configuration.
- Verify voltage, conductor, terminal, enclosure, clearances and maintenance access.
- Check the accessory’s signal or trip logic against the control circuit and upstream/downstream protection.
- Installation, testing and maintenance must be carried out by qualified personnel under applicable rules.
Dimensions(unit:mm)
Conductor requirements and cross section
| Copper cross-section ( mm2) |
| 1.5~2.5 |
Perché scegliere CHAC
Con oltre 30 anni di esperienza nella produzione, oltre 1100 dipendenti e oltre 100 milioni di pali
Capacità annuale e produzione automatizzata di 90% unità, CHAC garantisce una capacità produttiva stabile e un'alta qualità dei prodotti.
Controllo qualità per clienti OEM/ODM globali. Il nostro sistema di produzione interno supporta la collaborazione a lungo termine
Cooperazione per i marchi elettrici, gli importatori e i distributori.
30+
ANNI DI ESPERIENZA
Specializzata nella produzione di apparecchiature elettriche a bassa tensione
1100+
L'EMPLOYATI
Il team professionale garantisce una qualità e una consegna stabili
100 milioni di persone
Capacità annuale delle stazioni
Capacità produttiva su larga scala per soddisfare la domanda globale
90%
PRODUZIONE AUTOMATIZZATA
Automazione avanzata per un'elevata efficienza e coerenza
Linea di assemblaggio automatizzata
Laboratorio di test
Iniezione e stampaggio
Ispezione di qualità
Un rigoroso sistema di controllo qualità assicura che ogni prodotto soddisfi gli standard internazionali.
Cosa possiamo personalizzare?
For CQBE3 projects, CHAC can review private-label marking, packaging, approved electrical options, accessory interface and technical-document requirements. Requests outside the published range are subject to engineering evaluation, testing, MOQ and project feasibility.
Logo e branding
Le opzioni di etichettatura e di placca identificativa a marchio privato sono soggette a revisione dell'artwork e approvazione del campione.
Imballaggio
Personalizzazione
Sono disponibili cartoni, etichette e manuali conformi alle specifiche dell’ordine approvato e al mercato di destinazione.
Elettrico
Personalizzazione
Published 230V AC 50Hz, not stated as an ampere load rating on the product record and interface options are reviewed against the ordered CQBE3 configuration; non-standard requests require technical evaluation.
Prodotti
Apparizione
Le opzioni di aspetto possono essere valutate in base alle esigenze di attrezzatura, al minimo ordine di quantita', alle esigenze di marcatura e alla fattibilità tecnica.
Certificazione
Supporto
Datasheets, drawings and verified document information are supplied for the applicable approved configuration.
Ingegneria
Sviluppo
Il supporto al progetto può includere la revisione dei disegni, la valutazione dei campioni, i test e la pianificazione della produzione, previa approvazione tecnica.
Scarica
Altri prodotti
Request the current datasheet, drawings, wiring information and applicable documents for the ordered accessory configuration.
Necessita di documenti tecnici?
Contattateci per ricevere schede tecniche, certificati, disegni, assistenza nella scelta dei prodotti o supporto per progetti OEM/ODM.
CQBE3 Product FAQ
Where is the CQBE3 used?
It is intended for audible electrical signaling in industrial, commercial and residential contexts where the circuit and enclosure are suitable.
What voltage does the CQBE3 use?
The published electrical reference is 230V AC 50Hz. Confirm the supply and the complete signaling circuit before ordering.
How should a modular alarm bell be selected?
Confirm voltage/frequency, enclosure and rail/interface fit, conductor range, sound-level requirement, duty and local installation rules. The product record does not establish a universal dB or IP rating.
What conductor range is listed for the CQBE3?
The published conductor reference is 1.5–2.5mm² conductor reference. Final conductor and protective-device selection depends on the project design.
Can the CQBE3 be used as a circuit-breaker alarm contact?
It is an audible signaling device. A breaker alarm contact or relay may be needed to create the signal; confirm the complete control logic and interface.
What documents are available for the CQBE3?
Request the current product drawing, installation information and applicable technical documents for the ordered version and destination market.
Confirm the Right CQBE3 Configuration
Share the required function, voltage, interface, quantity, destination market and technical documents. CHAC will review the request against the published accessory data.
