Considera un ipotetico distributore elettrico a Manila che sta confrontando due preventivi per un interruttore miniaturizzato 32. I prezzi unitari sono diversi, ma lo sono anche i poli e la capacità di interruzione dichiarata. Un'offerta presuppone inoltre una quantità d'ordine molto più elevata. Una semplice classificazione dei prezzi premerebbe un prodotto diverso e un impegno d'acquisto differente. Il confronto necessita di una specifica concordata prima ancora di individuare il fornitore preferito.
Riepilogo: Confronta i prezzi degli MCB solo dopo aver verificato corrente nominale, poli, curva di intervento, funzionamento in AC o DC, tensione di esercizio, capacità di interruzione e norma di riferimento del prodotto. Una semplice etichetta 10 A o 32 A non è sufficiente. Successivamente, confronta quantità, accessori inclusi, imballaggio e termini di consegna per determinare il costo dell’ordine effettivo.
Verificare il numero di poli e la curva di intervento dell'MCB prima di confrontare i prezzi.
A prezzo del disgiuntore miniaturizzato È significativo solo per una configurazione identificabile. Annotare il codice completo dell’ordine, comprensivo delle caratteristiche corrente e curva, anziché affidarsi a una fotografia o alla descrizione del microinterruttore. Chiedere ai fornitori di segnalare eventuali scostamenti dalle proprie specifiche, invece di applicare tacitamente il prezzo della soluzione più vicina disponibile.
Per un 10 prezzo dell'interruttore automatico per circuiti Per la richiesta di informazioni, specificare se il circuito necessita di un polo o di più poli, quale è la tensione di alimentazione e quali funzioni di protezione e commutazione sono richieste. Un dispositivo 1P e un dispositivo 2P non sono equivalenti solo perché entrambi riportano 10 A. Allo stesso modo, le descrizioni 1P+N e 2P richiedono chiarimenti sui poli protetti e su quelli commutati.
The trip curve is a separate choice. B, C and D curves concern different magnetic tripping characteristics. Select them for the circuit’s inrush and disconnection requirements. A cheaper curve or a curve that avoids a nuisance trip cannot be substituted without checking protection. The MCB trip-curve guide explains the selection issue in more detail.
| Specificazione | What to put on the comparison sheet | Common mismatch |
|---|---|---|
| Corrente | Exact rated-current option | Using a frame or series maximum instead |
| Poli | Required protected and switched poles | Treating 1P+N and 2P as automatically equivalent |
| Curva | Required B, C or D characteristic, where applicable | Accepting a different curve to reduce price |
| Electrical duty | AC or DC, operating voltage and frequency where relevant | Using insulation voltage as operating voltage |
| Interrompere il turno | Declared value, voltage and standard basis | Comparing kA figures without their conditions |
Il MCB price should be attached to this complete specification. Where more than one technically acceptable option exists, compare them as alternatives and explain the differences. This is especially useful for distributor ranges that include several pole and curve combinations under one product family.

Why MCB voltage and breaking-capacity ratings need a stated standard
An AC breaker must not be assumed suitable for DC because its ampere rating matches. The interruption conditions and declared circuit arrangements differ. Obtain the manufacturer’s DC rating and installation requirements for a DC application. A product’s physical size does not prove interchangeability across those duties.
Similarly, rated insulation voltage, Ui, is not a substitute for rated operational voltage, Ue. When an offer lists a prominent voltage number, ask what it represents. Confirm the operating voltage for the ordered poles and application before comparing the breaking duty.
IEC 60898-1 and IEC 60947-2 are different product-standard contexts. IEC 60947-2:2024 describes circuit-breakers intended to be installed and operated by instructed or skilled persons. A model may have declared data under more than one standard, but the evidence must identify the exact configuration and rating basis. Do not relabel Icu or Ics as Icn simply because a quotation uses the word MCB.
The distinction is practical for purchasing: a short description such as 6 kA breaker is incomplete without the associated standard, voltage and model. Ask for the applicable datasheet and supporting records. A general certificate for a supplier or another product family does not establish the ordered device’s conformity.
Include accessories and delivery when comparing MCB order costs
A 32 amp circuit breaker price can change with quantity, packaging and the selected options. Keep the technical specification constant while comparing those commercial terms. Separate sample pricing from the repeat-order quantity, and distinguish a target quantity from a binding minimum order.
Include the accessories the actual assembly requires. A comb busbar, auxiliary contact or lockout device cannot be treated as compatible simply because it fits in a catalogue photograph. Ask for the exact approved accessory and establish whether it is included. If an alternative device requires a new busbar or enclosure arrangement, include that engineering and material cost.
| Order item | Chiarimento richiesto | Perché è importante |
|---|---|---|
| Quantity and assortment | Quantity per rating, pole and curve | A mixed order may not use one headline unit price |
| Packaging and labels | Approved carton, marking and document scope | Custom work can change cost and preparation time |
| Accessories | Exact compatible item and included quantity | A missing accessory can change the installed cost |
| Delivery | Trade rule, named place and freight responsibility | Ex-works and delivered offers cover different costs |
| Quality and claims | Acceptance process, traceability and written remedy | Returns and sorting costs affect the result |
For illustration only, an apparent USD 0.20 saving on 500 devices equals USD 100. If the alternative requires USD 150 of additional compatible connection hardware, the purchase is USD 50 more expensive before any labour difference. These hypothetical figures show the comparison method; they are not current MCB market prices or CHAC quotations.
Use the ICC Incoterms 2020 rule and a precise named place where appropriate. FOB is specific to sea and inland-waterway transport, not a general synonym for export price. Freight, insurance, duties, taxes, payment and warranty responsibilities should be clear in the offer and contract. Do not assume the trade rule settles every commercial issue.

What to specify when requesting a PXB6 MCB quotation
di CHAC PXB6-63 product page lists 6, 10, 16, 20, 25, 32, 40, 50 and 63 A options, with 1P, 2P, 3P and 4P arrangements and B, C and D curves. Those published choices make a useful starting point for a quotation. They do not establish that every option is in stock or shares one price.
The page lists 500 V as rated insulation voltage and describes its short-circuit data as 6 kA Icu = Ics while referencing IEC 60898-1. For a purchase requiring a particular IEC 60898-1 Icn declaration, request the corresponding model-specific evidence. Preserve the manufacturer’s terminology in the enquiry and resolve the rating basis rather than assuming the labels are interchangeable.
Send current, curve, poles, system voltage, required fault duty, destination and quantity by configuration. Add document, packaging and accessory requirements. After technical review, keep the accepted model code and specification with the purchase order, and require approval for changes to the supplied configuration.
IEC 61439-1’s assembly requirements are relevant when these components are incorporated into a distribution assembly. Selecting a suitable MCB is one part of that work. It does not replace conductor calculations, assembly verification or local installation requirements. Consider those responsibilities before accepting a component substitution solely for price.
Common questions about comparing MCB prices
Why do miniature circuit breaker prices vary for the same current rating?
The devices may differ in poles, curve, electrical duty, breaking rating, standard basis and accessory scope. Quantity, packaging and delivery terms can also differ. Match those items before drawing conclusions about supplier pricing.
What should be compared before buying a 10A or 32A MCB on price?
Compare the complete order code, poles, curve, operating voltage, AC or DC duty, breaking rating and relevant compliance records. Then align quantity and delivered scope. Check that the selected device meets the circuit design rather than choosing current from price alone.
How do pole count and trip curve affect the MCB specification?
Pole configuration determines which conductors are switched and protected together. The curve affects magnetic tripping behaviour. Both must match the supply and protection design, and neither should be changed silently during quotation.
Can an AC MCB and a DC MCB be compared as interchangeable products?
No. The device must have a declared rating for the intended supply and installation arrangement. Equal current and similar dimensions do not establish equivalent interruption capability. Use the manufacturer’s application instructions.
Why should the applicable protection standard be checked on a low-price MCB?
It defines the rating and test context against which the product is declared. An attractive kA number without its standard and voltage can be misleading. Confirm evidence for the ordered model and destination requirements.
Does the advertised MCB price include the required accessories and order quantity?
Not necessarily. Advertised pricing may apply to a particular quantity or a basic device without accessories. Request a written offer stating the exact assortment, compatible accessories, packaging and minimum order conditions.
How can buyers compare delivered cost for an identical miniature circuit breaker specification?
Use the same accepted specification and quantity for each offer. Add excluded required accessories, freight, import costs and any resulting assembly changes on a consistent basis. Compare written warranty and acceptance terms separately from the unit-price calculation.
Referenze
- IEC 60947-2:2024: declared circuit-breaker scope.
- IEC 61439-1:2020: low-voltage assembly requirements.
- International Chamber of Commerce: Incoterms 2020 rules.
Confirm the specification before comparing the saving. Send CHAC your MCB ratings, quantities and delivery requirements to obtain a clearly defined quotation.



