PXB6DC-63M Brettina di cortocircuito a circuito stampato
The CHAC PXB6DC-63M DC miniature circuit breaker offers overcurrent protection across a 0.5–63A rated-current range. Available in one to four poles, its voltage rating rises from 125V DC for 1P to 500V DC for 4P; use the specified pole arrangement and model-specific tripping characteristics.
Riassunto del prodotto
Il CHAC PXB6DC-63M DC miniature circuit breaker offers rated currents from 0.5A to 63A for DC overcurrent protection. Its four-pole configuration is rated at 500V DC; the one-, two- and three-pole versions have lower operating-voltage ratings.
Per importatori, distributori e produttori di apparecchiature, CHAC può verificare la configurazione richiesta rispetto ai requisiti del circuito e alla documentazione del mercato di destinazione. Concordare il modello esatto, i disegni e i requisiti di marcatura prima dell’approvazione del campione o di un ordine ripetuto.
Punti chiave di selezione
Applicazioni tipiche
Use the PXB6DC-63M in DC control or distribution assemblies where the selected current, poles and operating voltage match the circuit. The low-current choices can be relevant to smaller branches, but the actual load and conductor design determine the rating.
Modulazioni e Guida alla selezione
| Elemento selezionabile | PXB6DC-63M configuration | Cosa verificare |
|---|---|---|
| Voltage by pole count | 1P 125V; 2P 250V; 3P 375V; 4P 500V DC | Do not treat 500V as the rating of every version. |
| Rated-current choices | 0.5–63A in the published steps | Choose from the actual available ratings rather than treating the range as continuously adjustable. |
| Interruzione di guasto | Icu 10kA; Ics 7.5kA | Check both values and their stated test conditions against the project fault level. |
| Termination | Up to 25mm²; terminal torque 2.5N·m | Verify conductor preparation and terminal instructions for the ordered device. |
Use these checks to compare the protection function, configuration and related CHAC products before specifying PXB6DC-63M. Related products are selection alternatives or system components, not automatic replacements.
Order the exact current step and DC characteristic
The range includes fractional-ampere choices as well as common distribution ratings.
Check terminal fit before approving the panel
The stated terminal capacity does not set the permissible circuit current by itself.
Compare CQBD-63 for the required function
The CHAC CQBD-63 DC circuit breaker offers overload and short-circuit protection with a non-polar design and contact-position indication. One- to four-pole versions cover DC voltages from 300V to 1200V; match the pole arrangement and tripping characteristic to the circuit.
Compare CQM5NEZ for the required function
Il disgiuntore a custodia stampata CHAC CQM5NEZ DC è disponibile con unità di arresto magnetiche o termomagnetiche per circuiti DC da 1500 V. Se sono richieste sia la protezione da sovraccarico che quella da cortocircuito, selezionare la versione termomagnetiche. Le versioni da 350 A e 630 A coprono i valori di corrente da 63 A a 630 A, con una capacità di arresto determinata dalla versione del quadro e dalla versione M/H.
Need Help Specifying PXB6DC-63M?
Invia i requisiti del circuito, la configurazione selezionata, il mercato di destinazione e la quantità per una verifica specifica del modello.
Order the exact current step and DC characteristic
The range includes fractional-ampere choices as well as common distribution ratings. Provide the load profile and the required current step. The technical characteristics use 4In/8In/12In references; do not relabel them as standard AC B/C/D curves.
Check terminal fit before approving the panel
The stated terminal capacity does not set the permissible circuit current by itself. Coordinate cable ampacity, bending space, termination method and the specified tightening torque. Obtain the selected configuration drawing rather than copying the wiring from another DC breaker.
How to Specify a PXB6DC-63M Order
Utilizzare i dettagli di configurazione riportati di seguito nella specifica d’acquisto. Conservare la revisione approvata del disegno e l’identificazione del prodotto insieme all’ordine, in modo da poter verificare in modo coerente le consegne ripetute.
| Dettaglio dell'ordine | Informazioni da includere |
|---|---|
| Voltage by pole count | 1P 125V; 2P 250V; 3P 375V; 4P 500V DC — Do not treat 500V as the rating of every version. |
| Rated-current choices | 0.5–63A in the published steps — Choose from the actual available ratings rather than treating the range as continuously adjustable. |
| Interruzione di guasto | Icu 10kA; Ics 7.5kA — Check both values and their stated test conditions against the project fault level. |
| Termination | Up to 25mm²; terminal torque 2.5N·m — Verify conductor preparation and terminal instructions for the ordered device. |
| Progetto e documenti | Fornire i requisiti documentali relativi all’applicazione, alle condizioni di installazione e al mercato di destinazione. |
| Quantità e identificazione | Indicare la quantità, i requisiti relativi ai campioni, la lingua dell’imballaggio e qualsiasi proposta di marchio; verificare la fattibilità prima dell’approvazione. |
Verificare la corretta installazione prima dell'approvazione.
Specifiche tecniche
| Parametro | |
| Rated Voltage(V) | 1P DC 125V 2P DC 250V 3P DC 375V 4P DC 500V |
| Rated Current(A) | 0.5, 1, 1.6, 2, 2.5, 3, 4, 5, 6, 8, 10, 13, 16, 20, 25, 32, 40, 50, 63A |
| Rated Insulation Voltage(Ui) | 500 V |
| Ultimate Breaking Capacity(Icu)(kA) | 10 |
| Service Breaking Capacity(Ics)(kA) | 7.5 |
| Numero di polacchi | 1P, 2P, 3P, 4P |
| Resistenza meccanica | ≥10000 |
| Durata elettrica | ≥1500 |
| Termination Capacity | ≤25mm² |
| Tightening Torque(N·m) | 2.5 |
| Classe di protezione | IP20 |
| Standard | GB/T14048.2, IEC60947-2 |
| Certificazione | CE·CB·CCC |DEKRA Certified |
Tripping Characteristics(Reference Temperature: 30°C)
| Oggetto | Testare la corrente (A) | Status iniziale | Termine per l’attivazione o l’inattivazione | Risultato previsto | Commenti |
| a | 1.05In | Freddo | t≤1h | Non-tripping | La corrente aumenta gradualmente fino al valore specificato in 5 secondi |
| b | 1.3In | Seguendo l'articolo a) il test | t＜1h | Innamorarsi | |
| c | 2.55In | Freddo | 1s＜t＜60s(In≤32A) 1s＜t＜120s(In>32A) |
Innamorarsi | |
| d | 4In, 8In, 12In 80% |
Freddo | t≥0.2s | Non-tripping | Il circuito viene acceso chiudendo un interruttore ausiliario. Verifica la capacità di arresto rapido. |
| e | 4In, 8In, 12In 120% |
Freddo | t＜0.2s | Innamorarsi |
Nota: Il termine “freddo” indica che il test viene effettuato a una temperatura di riferimento di calibrazione senza carico prima della prova.
Designazione del tipo
Curvature pericolose
Dimensioni (mm)
Perché scegliere CHAC
CHAC Electric supplies electrical protection and control products for importers, distributors and equipment brands. For PXB6DC-63M, agree the configuration, technical documents, approved sample and identification requirements before production. The company facilities shown below provide company context, not a claim that every model uses the same production or test process.
01
CONFIRM THE SPECIFICATION
Agree the PXB6DC-63M configuration, circuit duty and installation requirements.
02
REVIEW THE DOCUMENTS
Confirm model-specific drawings and destination-market requirements.
03
APPROVE THE SAMPLE
Record the accepted configuration and marking requirements.
04
DEFINE ORDER CHECKS
Agree packaging, identification and delivery requirements in the quotation.
Linea di assemblaggio automatizzata
Laboratorio di test
Iniezione e stampaggio
Ispezione di qualità
Cosa possiamo personalizzare?
Discuss PXB6DC-63M product identification, packaging and documentation with CHAC. Each proposed change is subject to technical feasibility, marking rules and approval of the exact order; no altered rating or certification is implied.
Logo e branding
Submit logo artwork and marking requirements for review against the available print area and mandatory product markings.
Packaging & Manuals
Define carton labels, packaging language, product identification and instruction requirements for the destination market.
Configuration Selection
Specify PXB6DC-63M with the required voltage by pole count, operating conditions and protection duty. Confirm the complete order combination.
Assembly Requirements
Provide the mounting and connection requirements for review. Changes to the housing, terminals or operating arrangement require engineering approval.
Market Documentation
Request documents covering the exact PXB6DC-63M model and destination market. A standard reference alone is not evidence of certification.
Sample Approval
Agree the sample specification, drawing revision and acceptance criteria before confirming a production order.
Technical Documents and Support
PXB6DC-63M Technical Documents
Request the PXB6DC-63M datasheet, configuration drawing, installation instructions and available model-specific market documents.Request Datasheet
Necessita di documenti tecnici?
Send the application, electrical requirements, assembly layout and destination market for configuration and document review.Contattaci
PXB6DC-63M Product FAQ
Can an AC breaker replace a PXB6DC-63M?
Not without documented suitability for the DC circuit. Arc interruption, operating voltage and pole connections must be verified for DC service. Select the correctly rated PXB6DC-63M configuration or another documented DC device.
Which PXB6DC-63M version is rated for 500V DC?
The published 500V DC rating applies to the 4P version. The listed ratings are 125V for 1P, 250V for 2P and 375V for 3P. Confirm the corresponding wiring diagram.
Is the 63A model the only available current rating?
No. The series includes 0.5, 1, 1.6, 2, 2.5, 3, 4, 5, 6, 8, 10, 13, 16, 20, 25, 32, 40, 50 and 63A. Select the required step from the circuit and conductor design.
How do I choose the PXB6DC-63M current rating?
Use circuit design current and conductor ampacity, then check inrush, ambient conditions and the fault-disconnection requirement. Do not increase current rating simply to stop a recurring trip without investigating its cause.
What is the difference between Icu and Ics?
Icu and Ics describe ultimate and service short-circuit interruption duties under stated test conditions. Use the PXB6DC-63M values for the selected voltage and configuration, and compare them with the prospective fault current.
What should I include in a PXB6DC-63M purchase specification?
Specify DC operating voltage, poles, rated current, the exact trip characteristic and required fault capacity. Include wiring requirements, load type, destination-market documentation, quantity and any branding request.
Specify the Right PXB6DC-63M Configuration
Send CHAC your required configuration, application, destination market and estimated quantity. We will review the requested specification and provide the relevant technical documents and commercial proposal.
Prodotti correlati
-
Interruttori di circuito miniaturizzati della serie PXB9N-32 con funzione di isolamento
-
FB2L-63 Brevetto di corrente residua con protezione contro sovracorrente – Tipo elettromagnetico
-
Dispositivo di protezione da corrente residua della serie CQL14
-
Interruttore di sicurezza esterno della serie CQB7R-125 per contatori energetici prepagati