FB2H-63 Miniature Circuit Breaker
The FB2H-63 miniature circuit breaker provides overload and short-circuit protection within the published 10A–63A range. Its verified product data lists 10kA Icu; 7.5kA Ics, 1P / 2P and C. Final selection must match the conductor, load, prospective fault current, installation system and applicable local rules.
Product Overview
FB2H-63 is a 10kA Icu; 7.5kA Ics miniature circuit breaker covering 10A–63A. It is available with 1P / 2P and C trip options as stated in the product data. For the FB2 plug-in family, confirm the receiving panel and base arrangement; a matching current rating alone does not establish compatibility.
The model data references IEC 60898-1. Standards, certification scope and technical documents must be confirmed for the ordered configuration and destination market.
Key Features
Typical Applications
It is intended for AC distribution circuits where the selected current rating, curve, pole arrangement and breaking capacity match the conductor and system study. Typical project contexts include residential, commercial and light-industrial final distribution; suitability depends on the actual circuit rather than the application label alone.
Applications and Selection Guide
Use the product-specific values below as a shortlist, then validate the complete circuit design. Product ratings do not replace a fault-current study, conductor calculation, coordination review or applicable installation rules.
| Selection point | FB2H-63 option | What the project must confirm |
|---|---|---|
| Rated current | 10A–63A | Coordinate with design current, conductor ampacity, ambient temperature and grouping |
| Trip curve | C | Choose for load inrush and required fault-clearing performance, not by current alone |
| Breaking capacity | 10kA Icu; 7.5kA Ics | Confirm against the prospective short-circuit current at the installation point |
| Pole arrangement | 1P / 2P | Match supply system and local switching or isolation rules |
| Installation interface | Plug-in mounting | Check enclosure, rail/base, terminal and conductor compatibility |
Breaking Capacity
10kA Icu; 7.5kA Ics is the published product value. Confirm the prospective short-circuit current at the installation point.
Trip and Load Behaviour
C is the available trip/protection option. Match it to load inrush and required disconnection performance.
Pole Configuration
Available arrangement: 1P / 2P. Confirm which conductors must be switched and protected under local rules.
MCB or RCBO
An MCB does not replace residual-current protection where an RCD or RCBO is required.
Ordering Guide
- Specify the exact model: FB2H-63.
- State the required current rating within 10A–63A.
- Confirm pole arrangement: 1P / 2P.
- Confirm trip or protection option: C.
- Provide system voltage, expected fault level, destination market, quantity and any document requirements.
Installation and Coordination Checks
- Verify conductor material and cross-section against the circuit calculation and the published terminal range.
- Confirm the prospective short-circuit current does not exceed the applicable breaking rating.
- Check upstream/downstream coordination, enclosure temperature, grouping, altitude and required clearances.
- Installation, isolation, testing and maintenance must be carried out by qualified personnel under applicable rules.
Type designation
Tripping curves
Dimensions(mm)
Technical Specifications
| Parameter | |
| Bracket rating current | 63A |
| Number of poles | 1P, 2P |
| Feature | Overload and short circuit protection |
| Rated frequency f(HZ) | 50/60Hz |
| Rated operating voltage Ue(V AC) | 240V~ |
| Rated current In(A) | 10,16,20,25,32,40,50,63A |
| Rated insulation voltage Ui(V) | 500V |
| Rated impulse withstand voltage Uimp(kV) | 4kV |
| Rated operating short-circuit breaking capacity (kA) | 7.5 kA |
| Rated limit short-circuit breaking capacity (kA) | 10kA |
| Current limiting class | 3 |
| Instantaneous trip characteristics | Electromagnetic type |
| Trip type | C |
| Electrical service life | 4000 times |
| Service life of machinery | 10000 times |
| Class of protection | IP20 |
| Wiring capability (mm2) | 1 to 25mm2 |
| Ambient temperature (daily average temperature ℃) | 35 ℃ or less |
| Storage temperature | -25℃ to +55℃ |
| Types of climate protection | Damp-heat type |
| Altitude (m) | ≤2000m |
| Relative humidity of air | 50% ~ 90% |
| Pollution level | 2 |
| Installation environment | / |
| Installation category | Ⅱ or Ⅲ |
| Installation mode | plug-in |
| Meet the standard | IEC 60898-1 |
Why Choose CHAC
With 30+ years of manufacturing experience, 1100+ employees, 100M+ poles
annual capacity and 90% automated production, CHAC provides stable production capacity and strict
quality control for global OEM/ODM customers. Our in-house manufacturing system supports long-term
cooperation for electrical brands, importers and distributors.
30+
YEARS EXPERIENCE
Specialized in low-voltage electrical manufacturing
1100+
EMPLOYEES
Professional team ensures stable quality and delivery
100M+
POLES ANNUAL CAPACITY
Large-scale production capacity to meet global demand
90%
AUTOMATED PRODUCTION
Advanced automation for high efficiency and consistency
Automated Assembly Line
Testing Laboratory
Injection & Stamping
Quality Inspection
Strict quality control system ensures every product meets global standards.
What Can We Customize?
For FB2H-63 projects, CHAC can review private-label marking, packaging, appearance, available electrical configurations and technical-document requirements. Requests outside the published range are subject to engineering evaluation, testing, MOQ and project feasibility.
Logo & Branding
Private-label marking and nameplate options are subject to artwork review and sample approval.
Packaging
Customization
Cartons, labels and manuals can be prepared for the approved order specification and destination market.
Electrical
Customization
Select from the published 10A–63A, 1P / 2P and C options; non-standard requests require technical evaluation.
Product
Appearance
Appearance options can be reviewed subject to tooling, MOQ, marking requirements and technical feasibility.
Certification
Support
Datasheets, drawings and verified certificate information are supplied for the applicable approved configuration.
Engineering
Development
Project support may include drawing review, sample evaluation, testing and production planning, subject to technical approval.
Download
FB Series Miniature Circuit Breaker
Complete product overview for low-voltage electrical components and product selection reference.
Need Technical Documents?
Contact us for datasheets, certificates, drawings, selection guidance or OEM/ODM project support.
FB2H-63 Product FAQ
What does 10kA mean on the FB2H-63 breaker?
FB2H-63 publishes 10kA Icu and 7.5kA Ics short-circuit values. These describe fault-interruption duty, not its 10A–63A continuous rated-current range.
When should a 10kA plug-in MCB be used?
Only after confirming the prospective short-circuit current, required Ics duty, coordination and panel compatibility. A 10kA label does not make the breaker suitable for every board or fault level.
What is the difference between a 10kA and 6kA plug-in breaker?
The stated short-circuit duty differs, and Icu/Ics values may also differ. Compare the complete verified product data and receiving-panel requirements rather than treating the devices as interchangeable.
Which is better, a plug-in or bolt-on breaker?
The correct mounting style is the one approved for the receiving assembly. FB2H-63 uses plug-in mounting; a bolt-on breaker follows a different mechanical and connection design.
Are 10kA plug-in circuit breakers safe?
They can be suitable when their electrical ratings, base or panel interface and installation instructions all match the application. Product current, curve and breaking capacity alone are not enough to establish compatibility.
Do plug-in circuit breakers go bad after ten years?
There is no universal ten-year failure rule. Condition, loading, temperature, connection quality and fault history matter; damaged, overheated or unreliable equipment should be assessed by qualified personnel.
Confirm the Right FB2H-63 Configuration
Send your current rating, pole arrangement, trip option, system voltage, prospective fault level, destination market and quantity. CHAC will review the request against the published product range.
