Công tắc chuyển mạch từ xa dòng CQAM2
Phần CQAM2 Khoảng thời gian tự động ngắt shunt được quy định cho công tắc ngắt shunt từ xa. Dữ liệu được công bố bao gồm nguồn điện điều khiển AC 230V 50Hz và phạm vi hoạt động 160–260V; điện áp Ui 415V. Trước khi đặt hàng, vui lòng xác nhận về giao diện phụ kiện, mạch điều khiển, hệ thống dây điện và yêu cầu của thị trường đích.
Product Overview
CQAM2 is a shunt trip release for low-voltage panel and breaker accessory systems. The summary below uses the published model record; it does not replace the complete drawing, wiring instructions or project design review.
Remote shunt trip switch. operating range 160–260V; Ui 415V is the published electrical reference. Compatibility, contact logic and installation details must be confirmed for the exact ordered version.
Key Features
Typical Applications
Use it where a compatible breaker must be tripped from a remote control or emergency circuit. Confirm the control voltage, trip logic, accessory interface and safe isolation procedure; a shunt release is not an undervoltage release.
Applications and Selection Guide
Use the product-specific values below as a shortlist, then validate the complete circuit and mechanical interface. An accessory rating alone does not establish compatibility with every breaker, panel or control system.
| Selection point | CQAM2 reference | What the project must confirm |
|---|---|---|
| Chức năng chính | Công tắc chuyển hướng từ xa | Confirm the required signal or protection function before ordering |
| Electrical reference | Cung cấp điện điều khiển 230V AC 50Hz | Match the project control or supply circuit |
| Rating / operating window | Dải hoạt động: 160–260V; Ui 415V | Use the published range; do not infer missing ratings |
| Interface | cho giao diện phụ kiện của máy cắt CQB2 tương thích | Verify the compatible breaker, panel, base or rail interface |
| Wiring | Tham khảo dây dẫn 1 × 2,5mm² | Final conductor and protection selection follows the project design and local rules |
| Documents | IEC 60947-5-1 | Request the exact drawing and applicable compliance documents for the ordered version |
Function and signal path
Remote shunt trip switch. Confirm whether the circuit needs status feedback, fault alarm, remote trip or voltage release.
Control-circuit fit
230V AC 50Hz control supply. Match the control voltage and operating window to the project circuit; never assume a nearby rating is interchangeable.
Mechanical interface
for compatible CQB2 breaker accessory interface. Confirm breaker family, rail/base or panel interface, clearances and maintenance access.
Wiring and documentation
1 × 2.5mm² conductor reference. Request the exact drawing and installation document for the ordered configuration.
Ordering Guide
- Specify the exact model and accessory function: CQAM2, remote shunt trip switch.
- State the control/supply voltage and any required operating window.
- Confirm the compatible breaker family, panel, base or DIN-rail interface.
- Provide quantity, destination market, wiring details and required technical documents.
- Ask CHAC to verify any non-standard marking, packaging or configuration request before production.
Installation and Coordination Checks
- Use the exact product drawing and installation instructions for the ordered configuration.
- Verify voltage, conductor, terminal, enclosure, clearances and maintenance access.
- Check the accessory’s signal or trip logic against the control circuit and upstream/downstream protection.
- Installation, testing and maintenance must be carried out by qualified personnel under applicable rules.
Type designation
Dimensions(mm)
Technical Specifications
| Parameter | ||
| AC-15 | Rated Operational Voltage (V) | AC 230V 50Hz |
| Rated Insulation Voltage (V) | 415V | |
| Operating Characteristics | When the voltage is between 160-260V, the trip unit can reliably operate. | |
| Mechanical Life | 4000 | |
| Standards | GB/T 14048.5, IEC 60947-5-1 | |
Conductor requirements and cross section
| Copper cross-section(mm2) |
| 1X2.5 |
Tại sao nên chọn CHAC
With 30+ years of manufacturing experience, 1100+ employees, 100M+ poles
annual capacity and 90% automated production, CHAC provides stable production capacity and strict
quality control for global OEM/ODM customers. Our in-house manufacturing system supports long-term
cooperation for electrical brands, importers and distributors.
30+
NĂM KINH NGHIỆM
Chuyên sản xuất thiết bị điện hạ thế
1100+
CÔNG NHÂN
Đội ngũ chuyên nghiệp đảm bảo chất lượng và giao hàng ổn định
100 triệu người
Sức chứa hàng năm của các cột
Năng lực sản xuất quy mô lớn để đáp ứng nhu cầu toàn cầu
90%
SẢN XUẤT TỰ ĐỘNG
Tự động hóa nâng cao cho hiệu quả cao và tính nhất quán
Dây chuyền lắp ráp tự động
Phòng thí nghiệm kiểm nghiệm
Xay và dập
Kiểm tra chất lượng
Strict quality control system ensures every product meets global standards.
Chúng tôi có thể tùy chỉnh những gì?
For CQAM2 projects, CHAC can review private-label marking, packaging, approved electrical options, accessory interface and technical-document requirements. Requests outside the published range are subject to engineering evaluation, testing, MOQ and project feasibility.
Logo & Thương hiệu
Private-label marking and nameplate options are subject to artwork review and sample approval.
Gói bao bì
Tùy chỉnh
Cartons, labels and manuals can be prepared for the approved order specification and destination market.
Điện
Tùy chỉnh
Published 230V AC 50Hz control supply, operating range 160–260V; Ui 415V and interface options are reviewed against the ordered CQAM2 configuration; non-standard requests require technical evaluation.
Sản phẩm
Vẻ ngoài
Appearance options can be reviewed subject to tooling, MOQ, marking requirements and technical feasibility.
Chứng nhận
Hỗ trợ
Datasheets, drawings and verified document information are supplied for the applicable approved configuration.
Kỹ thuật
Phát triển
Project support may include drawing review, sample evaluation, testing and production planning, subject to technical approval.
Tải xuống
CQAM2 Technical Documents
Request the current datasheet, drawings, wiring information and applicable documents for the ordered accessory configuration.
Need Technical Documents?
Contact us for datasheets, certificates, drawings, selection guidance or OEM/ODM project support.
CQAM2 Product FAQ
What is the CQAM2 used for?
The CQAM2 provides remote shunt tripping for a compatible breaker system. It is selected as a control accessory, not as a standalone overcurrent device.
What is the difference between a shunt trip and an undervoltage release?
A shunt trip is generally energize-to-trip, while an undervoltage release responds to a loss or reduction of its control voltage. Confirm the required trip logic for the project.
What control voltage does the CQAM2 use?
The published reference is 230V AC 50Hz control supply, with operating range 160–260V; Ui 415V. Do not substitute another coil voltage without confirming the exact model.
Which breaker is compatible with the CQAM2?
The product record specifies a compatible for compatible CQB2 breaker accessory interface. Confirm the breaker model, interface and accessory combination from the drawing.
Can a shunt release provide overload protection?
No. It trips a compatible breaker remotely; overload and short-circuit protection come from the breaker and must be selected separately.
What wiring is listed for the CQAM2?
The published conductor reference is 1 × 2.5mm² conductor reference. Final wiring, isolation and control-circuit protection must follow the project design and instructions.
Confirm the Right CQAM2 Configuration
Share the required function, voltage, interface, quantity, destination market and technical documents. CHAC will review the request against the published accessory data.
