630A MCCB Frame Size: CQM7-630 vs CQM7-800

A panel schedule calling for a 630A MCCB does not settle the frame choice. For purchasing and panel-layout teams, the important question is whether the proposed configuration matches the protection design, available mounting space and conductor connections—not simply whether its label includes 630A.

CHAC lists 630A rated-current options in both CQM7-630 and CQM7-800 published three-pole ranges. Either is therefore a catalogue candidate, but neither should be treated as an interchangeable replacement without checking the exact ordering code, dimensions, breaking-capacity designation and accessories. To check breaking capacity against the installation, start with the data for a prospective short-circuit current calculation.

How do CQM7-630 and CQM7-800 differ at 630A?

Phần CHAC CQM7 selection table distinguishes frame rating from available rated currents. The frame number identifies the frame rating; it does not mean every breaker within that frame carries that current.

Published comparisonCQM7-630CQM7-800
Rated-current options250, 315, 350, 400, 500, 630A500, 630, 700, 800A
630A optionListedListed
S option: Icu / Ics35 / 25kA35 / 25kA
M option: Icu / Ics50 / 35kA50 / 35kA
Dimensional interchangeabilityRequires configuration drawingRequires configuration drawing

These breaking values apply to the published three-pole models at AC 400/415V. The table establishes overlapping current options and equal listed breaking values for corresponding S or M options—not equal footprints, terminals or accessory interfaces.

For example, an enquiry for a 630A breaker in the CQM7-800 frame is consistent with the published range. It still needs configuration confirmation; the listing does not establish a field-interchangeable trip unit or permission to increase the circuit load later.

Comparison graphic showing 630A as a listed current option in CQM7-630 and CQM7-800.

Which electrical ratings must be checked beyond the frame number?

MCCB current rating and short-circuit breaking capacity answer different questions. Current rating concerns the selected device’s current-carrying and protection characteristics. Breaking capacity concerns interruption of fault current at a stated voltage.

Compare prospective short-circuit current at the installation point with the selected variant’s published Icu at the actual system voltage. Review Ics separately against the project’s service-performance requirements. Do not substitute the range headline “up to 50kA” for the S or M designation, or carry a voltage-specific value over to another voltage.

IEC 60947-2:2024 addresses circuit-breakers within its stated voltage scope and intended use by instructed or skilled persons. Its scope is not evidence that a particular CQM7 order is certified to that edition.

A larger Kích thước khung MCCB also does not establish a higher permitted circuit load. Conductor ampacity, protection characteristics, ambient conditions and assembly thermal performance remain design inputs. IEC 61439-1:2020 addresses assembly considerations including group rated current and temperature-rise verification. Breaker selection alone does not establish assembly compliance.

What dimensional and accessory information should purchasing request?

So sánh MCCB dimensions using drawings for the exact proposed configurations, not photographs or frame names. Include the installed envelope: terminals, barriers and operating hardware can affect usable space beyond the molded body.

Quyết địnhYêu cầu đầu vàoKiểm tra của người mua
Vừa vặn với bảng điều khiểnWidth, height, depth, mounting-hole centres and clearancesCompare with the panel layout
Conductor connectionTerminal geometry, conductor range, lug details and tightening dataConfirm the specified cable or busbar interface
Door operationHandle interface, shaft arrangement, door cutout and operating envelopeRequest frame-specific compatibility
Phối hợp bảo vệTrip characteristics, fixed values or adjustment ranges, and curvesMatch the approved protection design
Order identityFrame, current, poles, breaking designation and accessory codesAlign quotation, drawing and supplied configuration

Terminal covers, phase barriers, connection extensions and rotary-handle assemblies should be treated as compatibility questions, not assumed inclusions. Ask CHAC to identify applicable part codes for each proposed frame and confirm their combined installed dimensions.

Where the protection description is unclear, request explicit confirmation of thermal-magnetic versus magnetic-only protection. The CHAC MCCB overview notes that magnetic-only configurations need separate overload protection.

Panel designer comparing a breaker outline drawing with terminal and door-handle envelope drawings.

Các câu hỏi thường gặp

What is the difference between a 630A trip rating and an MCCB frame size?

A 630A trip rating describes the selected protection rating, while frame size identifies the breaker platform's frame rating. Neither term alone establishes adjustable settings or physical dimensions.

Can a 630A trip unit be supplied in an 800A MCCB frame?

CHAC lists a 630A rated-current option for CQM7-800. Confirm the complete configuration when ordering; this does not establish that a separately purchased trip unit can be exchanged between frames.

Which dimensions should be compared between CQM7-630 and CQM7-800?

Compare body width, height and depth, mounting-hole centres, terminal positions, required clearances and the installed accessory envelope. Include door-handle geometry where relevant.

Does choosing a larger frame automatically increase the permitted circuit load?

No. Permitted loading depends on the complete circuit and assembly design, including conductors, protection characteristics and thermal conditions. A larger frame is not an automatic capacity upgrade.

How should breaking capacity be compared at the actual system voltage?

Use the exact variant's voltage-specific Icu and Ics values. Compare Icu with the installation's prospective fault current and assess Ics against the required service performance.

Which terminal and rotary-handle accessories depend on the selected frame?

Compatibility may depend on terminal spacing, connection geometry, cover interfaces and handle mounting arrangements. Request confirmed codes for terminals, extensions, barriers, covers and the complete rotary-handle assembly.

What drawings and setting information should be requested before ordering a 630A MCCB?

Request configuration-specific outline, mounting, terminal and handle drawings, plus trip curves, fixed protection values or adjustment ranges, voltage-specific breaking ratings and the complete ordering code.

For a CQM7-630 versus CQM7-800 enquiry, send the circuit requirements, panel layout and conductor details through CHAC configuration consultation. Request confirmation of each proposed 630A configuration before releasing the purchase order; catalogue overlap is a starting point, not proof of installation equivalence.

Sources and further reading