Máy cắt không khí dòng CQW2
Phần Máy cắt không khí dòng CQW2 là một cầu dao không khí CHAC dùng để bảo vệ phân phối điện hạ thế chính. Trang này cung cấp bảng thông số kỹ thuật theo từng model cùng với hình ảnh sản phẩm gốc, giúp khách hàng kiểm tra điện áp, dòng điện, cấu hình, phương thức lắp đặt và các tiêu chuẩn áp dụng trước khi đặt hàng. Tính phù hợp cuối cùng phụ thuộc vào toàn bộ mạch điện, phương pháp lắp đặt cũng như các quy định của thị trường đích.
Giới thiệu sản phẩm
Aptomat không khí dòng CQW2 là một loại aptomat không khí được thiết kế để bảo vệ phân phối điện hạ thế chính. Hồ sơ sản phẩm hiện tại xác định rằng nó phù hợp cho các đường vào, cầu nối thanh cái và các đường cấp nguồn lớn. Hãy sử dụng đúng biến thể mẫu mã và giữ nguyên nguồn kỹ thuật làm cơ sở cho việc mua sắm thay vì giả định rằng mọi thành viên trong cùng dòng sản phẩm đều có cùng định mức.
Tóm tắt từ nguồn đã được xác minh: Ký hiệu loại Mã Vị trí Mã Ký hiệu Ý nghĩa & Giải thích ① Mã doanh nghiệp Zhejiang Chuangqi Electric Co., LTD. ② Mã sản phẩm Aptomat phổ thông ③ Số thứ tự thiết kế Số thứ tự thiết kế ④ Mã cấp khung 1600, 2000, 3200, 4000, 6300 ⑤ Số cực 3: 3-Pole, 4: 4-Pole ⑥ Kiểu lắp đặt D: Kiểu rút ra, F: Kiểu cố định ⑦ Dòng điện định mức 200~6300A ⑧ Bộ điều khiển thông minh L: Loại điện tử, M: Tiêu chuẩn
Tính năng chính
Các ứng dụng điển hình
Việc sử dụng thông thường có thể bao gồm các đường dây vào, bộ ghép thanh cái và các đường dây cấp nguồn lớn, khi dự án đã xác nhận điện áp hệ thống, dòng điện, mức độ chịu đựng ngắn mạch hoặc quá áp đột biến, các yêu cầu về dây dẫn và vỏ tủ, cũng như hướng dẫn lắp đặt của phiên bản được lựa chọn. Trang này không thay thế cho thiết kế dự án hoặc cơ quan có thẩm quyền.
Hướng dẫn đăng ký và tuyển chọn
Sử dụng các điểm quyết định sau đây cùng với dữ liệu mô hình đã được bảo tồn. Các mô tả về dòng sản phẩm giải thích mục đích, nhưng bảng kỹ thuật chính xác mới quyết định biến thể được đặt hàng.
| Điểm lựa chọn | Máy cắt không khí dòng CQW2 | Những gì dự án phải xác nhận |
|---|---|---|
| Ứng dụng | Các dự án ACB | Xác nhận hệ thống và môi trường thực tế |
| Cơ sở lựa chọn | bảo vệ phân phối điện hạ áp chính | Sử dụng đúng mẫu và bảng kỹ thuật. |
| Cài đặt | Làm theo hướng dẫn của mẫu. | Kiểm tra việc lắp đặt, khoảng cách và đầu nối |
| Tuân thủ quy định | Sử dụng tiêu chuẩn được liệt kê khi phù hợp. | Xác minh các quy tắc về phiên bản, phạm vi và đích đến |
| Sản phẩm liền kề | Đánh giá họ CHAC liên quan, nơi chức năng khác biệt | Không được thay thế nếu chưa có sự xem xét của bộ phận kỹ thuật. |
Chức năng
bảo vệ phân phối điện hạ áp chính
Đối chiếu chức năng bảo vệ hoặc chuyển mạch với hệ thống.
Cấu hình
Tùy chọn theo từng mẫu xe
Xác nhận dòng điện, điện áp, số cực, các đầu nối hoặc phụ kiện từ bảng.
Cài đặt
Độ vừa vặn cơ khí và điện
Kiểm tra vỏ bọc, vị trí lắp đặt, không gian đấu nối dây và lối tiếp cận cho công tác bảo trì.
Bằng chứng dự án
Tài liệu và hồ sơ kiểm tra
Giữ lại bản vẽ đã được phê duyệt, bảng thông số kỹ thuật và hồ sơ vận hành thử.
Hướng dẫn đặt hàng
- Hãy nêu chính xác mẫu và phiên bản.
- Cung cấp điện áp hệ thống, dòng điện, tần số và chức năng bảo vệ hoặc tải.
- Xác nhận việc lắp đặt, các đầu nối, phụ kiện, vỏ bọc và điều kiện môi trường.
- Chia sẻ số lượng, thị trường xuất khẩu và các tài liệu kỹ thuật cần thiết.
Kiểm tra lắp đặt và phối hợp
- Kiểm tra các thông số kỹ thuật và sơ đồ đấu nối của thiết bị theo bản vẽ dự án.
- Kiểm tra dây dẫn, thanh cái, vỏ bọc, khoảng cách an toàn và các yêu cầu siết chặt theo tài liệu kỹ thuật của sản phẩm.
- Điều phối các thiết bị bảo vệ hoặc điều khiển ở phía thượng lưu và hạ lưu, nếu có.
- Sử dụng nhân sự có trình độ chuyên môn để thực hiện công tác lắp đặt, thử nghiệm, cách ly và bảo trì.
Tên loại

| Vị trí mã | Ký hiệu mã | Ý nghĩa & Giải thích |
| ① | Mã doanh nghiệp | Công ty TNHH Điện lực Chuangqi Chiết Giang. |
| ② | Mã sản phẩm | Cầu dao tự động đa năng |
| ③ | Số sê-ri thiết kế | Số sê-ri thiết kế |
| ④ | Mã xếp hạng khung hình | 1600, 2000, 3200, 4000, 6300 |
| ⑤ | Số lượng người Ba Lan | 3: 3-Pole, 4: 4-Pole |
| ⑥ | Loại gắn | D: Loại rút ra, F: Loại cố định |
| ⑦ | Định mức dòng điện | 200~6300A |
| ⑧ | Bộ điều khiển thông minh | L: Loại điện tử, M: Loại tiêu chuẩn, H: Loại truyền thông |
| ⑨ | Điện áp mạch điều khiển | AC230V, AC400V, DC220V, DC110V |
Đặc điểm kỹ thuật
| Tham số | CQW2-1600 | CQW2-2000 | CQW2-3200 | |
| Định mức dòng điện vào (A) | 200, 400, 630, 800 1000, 1250, 1600 |
400, 630, 800, 1000 1250, 1600, 2000 |
2000, 2500, 2900, | |
| Dòng điện định mức cực N | 100%Trong | 100%Trong | 100%Trong | |
| Đánh giá điện áp hoạt động Ue | AC415V/690V | AC415V/690V | AC415V/690V | |
| Tần số định mức f | 50/60Hz | 50/60Hz | 50/60Hz | |
| Điện áp cách điện được đánh giá Ui | 1000V | 1250V | 1000V | |
| Độ bền điện áp xung định mức Uimp | 12kV | 12kV | 12kV | |
| Số lượng người Ba Lan | 3, 4 | 3, 4 | 3, 4 | |
| Tổng thời gian nghỉ | ≤30ms | ≤30ms | ≤30ms | |
| Thời gian đóng cửa | ≤70ms | ≤70ms | ≤70ms | |
| Đánh giá dòng ngắn mạch cực đại | AC415V | 65kA | 80kA | 100kA |
| Dòng cắt định mức Icu (giá trị hiệu dụng) | AC690V | 42kA | 65kA | 75kA |
| Dòng ngắn mạch định mức khi vận hành | AC415V | 55kA | 80kA | 85kA |
| Dòng cắt định mức Ics (giá trị hiệu dụng) | AC690V | 35kA | 65kA | 65kA |
| Công suất sản xuất định mức Icm | AC415V | 143kA | 176kA | 220kA |
| (Đỉnh) | AC690V | 88kA | 143kA | 176kA |
| Dòng chịu đựng ngắn hạn định mức | AC415V | 42kA | 60kA | 85kA |
| Dòng điện Icw hiện tại (RMS) | AC690V | 35kA | 40kA | 55kA |
| Hiệu quả hoạt động (Số lượng thao tác) |
Cuộc sống cơ học – Không cần bảo trì |
10000 | 15000 | 15000 |
| Cuộc sống cơ học – Có bảo trì |
10000 | 15000 | 15000 | |
| Tần số hoạt động | 20 thao tác/giờ | 20 thao tác/giờ | 20 thao tác/giờ | |
| Đời sống điện – AC415V | 15000 | 15000 | 15000 | |
| Đời sống điện – AC690V | 30000 | 30000 | 30000 | |
| Tần số hoạt động | 60 thao tác/giờ | 60 thao tác/giờ | 60 thao tác/giờ | |
| Bộ điều khiển và bảo vệ | Loại L (Loại điện tử) | |||
| Loại M (Loại tiêu chuẩn) | ||||
| Loại H (Loại truyền thông) | ||||
| Phương thức kết nối | Ngang | |||
| Theo chiều dọc | ||||
| Tiêu chuẩn | IEC60947-2, GB/T14048.2 | |||
| Tham số | CQW2-4000 | CQW2-6300 | |
| Định mức dòng điện vào (A) | 3200, 3600, 4000 | 4000, 5000, 6300 | |
| Dòng điện định mức cực N | 100%Trong | 100%Trong | |
| Đánh giá điện áp hoạt động Ue | AC415V/690V | AC415V/690V | |
| Tần số định mức f | 50/60Hz | 50/60Hz | |
| Điện áp cách điện được đánh giá Ui | 1000V | 1000V | |
| Độ bền điện áp xung định mức Uimp | 12kV | 12kV | |
| Số lượng người Ba Lan | 3, 4 | 3, 4 | |
| Tổng thời gian nghỉ | ≤30ms | ≤30ms | |
| Thời gian đóng cửa | ≤70ms | ≤70ms | |
| Đánh giá dòng ngắn mạch cực đại Dòng cắt định mức Icu (giá trị hiệu dụng) |
AC415V | 100kA | 120kA |
| AC690V | 80kA | 85kA | |
| Dòng ngắn mạch định mức khi vận hành Dòng cắt định mức Ics (giá trị hiệu dụng) |
AC415V | 85kA | 100kA |
| AC690V | 70kA | 75kA | |
| Công suất sản xuất định mức Icm (Đỉnh) |
AC415V | 220kA | 264kA |
| AC690V | 176kA | 187kA | |
| Dòng chịu đựng ngắn hạn định mức Dòng điện Icw hiện tại (RMS) |
AC415V | 85kA | 100kA |
| AC690V | 70kA | 75kA | |
| Hiệu quả hoạt động (Số lượng thao tác) |
Cuộc sống cơ học – Không cần bảo trì |
6000 | 1000 |
| Cuộc sống cơ học – Có bảo trì |
3000 | 800 | |
| Tần số hoạt động | 20 thao tác/giờ | 20 thao tác/giờ | |
| Đời sống điện – AC415V | 12500 | 5000 | |
| Đời sống điện – AC690V | 25000 | 10000 | |
| Tần số hoạt động | 60 thao tác/giờ | 60 thao tác/giờ | |
| Bộ điều khiển và bảo vệ | Loại L (Loại điện tử) | ||
| Loại M (Loại tiêu chuẩn) | |||
| Loại H (Loại truyền thông) | |||
| Phương thức kết nối | Ngang | ||
| Theo chiều dọc | |||
| Tiêu chuẩn | IEC60947-2, GB/T14048.2 | ||
Danh sách phụ kiện
| Tên phụ kiện | Parameters | |
| Tiêu chuẩn Cấu hình |
Closing Solenoid | AC230V, AC400V, DC220V, DC110V |
| Loại bỏ van chèn | AC230V, AC400V, DC220V, DC110V | |
| Energy Storage Motor | AC230V, AC400V, DC220V, DC110V | |
| Auxiliary Switch | 4 changeover contacts (default), 5 changeover contacts, 4NO+4NC, 6NO+6NC | |
| Others | Phase barrier, Door frame, Drawer base three-position lock | |
| Optional Cấu hình |
Rơ le thấp áp | AC230V, AC400V |
| Instantaneous, Delayed: 0.5s, 1s, 3s, 5s | ||
| Trip Locking Device | 1 lock + 1 key, 2 locks + 1 key, 3 locks + 2 keys, 6NO+6NC | |
| Khóa cơ học | For 2 circuit breakers: Linkage interlock (vertical), Cable interlock | |
| For 3 circuit breakers: Linkage interlock (vertical), Cable interlock | ||
| Others | Residual Current Transformer, External Neutral Current Transformer, Relay Module | |
| Communication Module (Profibus-DP), Power Module, Wireless Remote Control Module | ||
Bộ điều khiển thông minh
| Tham số | CQW2-L | CQW2-M | CQW2-2M |
![]() |
![]() |
![]() |
|
| Basic Functions |
Overload long-time delay protection; Short-time delay short-circuit protection; Instantaneous short-circuit protection; Ground fault protection; Dial switch grading setting; Running current bar graph indication; Test function; Fault recording function; Thermal memory function |
Overload long-time delay protection; Short-time delay short-circuit protection; Instantaneous short-circuit protection; Ground fault protection (differential type); LED digital display; Key setting method; Ammeter function; Test function; Fault recording function; Thermal memory function |
Overload long-time delay protection; Short-time delay short-circuit protection; Instantaneous short-circuit protection; Ground fault protection (differential type); LED digital display; Key setting method; Ammeter function; Test function; Fault recording function; Thermal memory function; Clock function; Self-diagnosis function; Contact pattern and mechanical operation count |
| Optional Functions |
MCR make-break and over-limit tripping; Contact output; 3P+N type neutral protection |
MCR make-break and over-limit tripping; Contact output; Voltage function; Residual current type leakage protection; Clock function; Current unbalance protection; Remote reset function; Load monitoring function; 3P+N type neutral protection; Low voltage ride-through |
MCR make-break and over-limit tripping; Contact output; Voltage function; Residual current type leakage protection; Current unbalance protection; Remote reset function; Load monitoring function; 3P+N type neutral protection; Low voltage ride-through |
| Optional Phụ kiện |
DC Power Module (DC110V/220V) External N-phase Transformer |
DC Power Module (DC110V/220V) External N-phase Transformer Ground Current Transformer ZT100 Residual Current Transformer ZCT1 ST201 Relay Module ST-4 Power Module ST Handheld Programmer |
DC Power Module (DC110V/220V) External N-phase Transformer Ground Current Transformer ZT100 Residual Current Transformer ZCT1 ST201 Relay Module ST-4 Power Module ST Handheld Programmer |
Lưu ý:
1.Only one of the following functions can be selected: 3P+N neutral protection, groundcurrent type leakage protection, or residual current leakage protection. The correspondingtransformer accessory must be additionally selected.
2.Only one signal unit (S1, S2, or S3) can be selected.
3.For detailed instructions on the intelligent controller, please refer to the “SW1 Series Intelligent Controller User Manual”.
| Tham số | CQW2-2H | CQW2-3M | CQW2-3H |
![]() |
![]() |
![]() |
|
| Basic Functions |
Overload long-time delay protection; Short-circuit short-time delay protection; Short-circuit instantaneous protection; Ground fault protection (differential type); LED digital tube display; Key setting method; Ammeter function; Fault memory function; Thermal memory function; Clock function; Self-diagnosis function; Contact pattern and mechanical operation count; Communication function |
Load monitoring (current method 1); Multi-curve long-time delay protection; Multi-curve short-time inverse-time protection; Short-time definite-time protection; Instantaneous protection; Current unbalance (phase loss) protection; Ground fault alarm; Ground fault protection (default T-type); Neutral protection; Four-phase current and ground current measurement; Thermal capacity; Eight records of faults, alarms and status changes; Historical current peak; Contact equivalent; Operation count; Clock function; Self-diagnosis; Chinese graphical LCD display; LCD status indicator; Keyboard operation |
Load monitoring (current method 1); Multi-curve long-time delay protection; Multi-curve short-time inverse-time protection; Short-time definite-time protection; Instantaneous protection; Current unbalance (phase loss) protection; Ground fault alarm; Ground fault protection (default T-type); Neutral protection; Four-phase current and ground current measurement; Thermal capacity; Eight records of faults, alarms and status changes; Historical current peak; Contact equivalent; Operation count; Clock function; Self-diagnosis; Chinese graphical LCD display; LCD status indicator; Keyboard operation; Communication function |
| Optional Functions |
MCR make-break and over-limit tripping; Contact output; Voltage function; Residual current type leakage protection; Clock function; Current unbalance protection; Remote reset function; Load monitoring function; 3P+N type neutral protection; Low voltage ride-through |
Function Table: D, U, UD, P, PD, H Select HD from the table (refer to function table description) Signal Unit: S1, S2, S3 Load Monitoring: Current Method 2 3P+N Type Neutral Protection Ground Current Type Leakage Protection Residual Current Type Leakage Protection Remote Reset Function |
Function Table: D, U, UD, P, PD, H Select HD from the table (refer to function table description) Signal Unit: S1, S2, S3 Load Monitoring: Current Method 2 3P+N Type Neutral Protection Ground Current Type Leakage Protection Residual Current Type Leakage Protection Remote Reset Function Profibus-DP Communication Protocol Device-net Communication Protocol |
| Optional Phụ kiện |
DC Power Module (DC110V/220V) External N-phase Transformer Ground Current Transformer ZT100 Residual Current Transformer ZCT1 ST201 Relay Module ST-4 Power Module ST Handheld Programme |
DC Power Module (DC110V/220V) External N-phase Transformer Ground Current Transformer ZT100 Residual Current Transformer ZCT1 ST201 Relay Module Selective Zone Interlocking Protection Device |
DC Power Module (DC110V/220V) External N-phase Transformer Ground Current Transformer ZT100 Residual Current Transformer ZCT1 ST201 Relay Module Selective Zone Interlocking Protection Device |
| D | U | UD | P |
| Demand Measurement(Current) Demand Protection |
Voltage Measurement Frequency Measurement Voltage Unbalance Rate Measurement Phase Sequence Detection Overvoltage Protection Undervoltage Protection Voltage Unbalance Protection Overfrequency Protection Underfrequency Protection Phase Sequence Protection |
Voltage Measurement Frequency Measurement Voltage Unbalance Rate Measurement Phase Sequence Detection Current Demand Measurement Overvoltage Protection Undervoltage Protection Voltage Unbalance Protection Overfrequency Protection Underfrequency Protection Phase Sequence Protection Demand Protection |
Voltage Measurement Frequency Measurement Voltage Unbalance Rate Measurement Phase Sequence Detection Power Measurement Power Factor Measurement Energy Measurement Overvoltage Protection Undervoltage Protection Voltage Unbalance Protection Overfrequency Protection Underfrequency Protection Phase Sequence Protection |
| PD | H | HD |
| Voltage Measurement Frequency Measurement Voltage Unbalance Rate Measurement Phase Sequence Detection Power Measurement Power Factor Measurement Energy Measurement Demand Measurement (Current, Power) Overvoltage Protection Undervoltage Protection Voltage Unbalance Protection Overfrequency Protection Underfrequency Protection Phase Sequence Protection |
Voltage Measurement Frequency Measurement Voltage Unbalance Rate Measurement Phase Sequence Detection Power Measurement Power Factor Measurement Energy Measurement Harmonic Measurement Undervoltage Protection Voltage Unbalance Protection Overfrequency Protection Underfrequency Protection Phase Sequence Protection |
Voltage Measurement Frequency Measurement Voltage Unbalance Rate Measurement Phase Sequence Detection Power Measurement Power Factor Measurement Energy Measurement Demand Measurement (Current, Power) Undervoltage Protection Overvoltage Protection Undervoltage Protection Voltage Unbalance Protection Overfrequency Protection Underfrequency Protection Phase Sequence Protection Reverse Power Protection |
Secondary Circuit Wiring Diagram
Wiring diagram of secondary circuit for SW1-1600-6300 circuit breakers equipped with L/M type intelligent controllers (auxiliary switch default
configuration: 4 changeover contacts)

| Terminal Number | Function Description | Biểu tượng | Explanation | Những nhận xét |
| 1, 2 | Auxiliary power input: AC230V, AC400V, DC220V, DC110V |
SW1 | SW1 Universal Circuit Breaker | Customer self-provided |
| For DC power: 1 is (+), 2 is (-) | S1~S4 | Signal lamp | Customer self-provided | |
| 3, 4, 5 | Fault trip auxiliary contact, contact capacity: AC250V, 3A |
TA | Current transformer | |
| 20 | Grounding (PE) | SAL | Micro switch | Customer self-provided |
| 27, 28 | Loại bỏ điện áp thấp | SB1 | Open button | Customer self-provided |
| 29, 30 | Loại bỏ shunt | SB2 | Close button | |
| 31, 32 | Closing electromagnet | x | Closing electromagnet | |
| 33, 34, 35 | Motor-operated mechanism (motor energy storage), 37 connect green wire, 38 connect black wire, 39 connect red wire |
F | Loại bỏ shunt | |
| 36~48 | Auxiliary contact terminal | Q | Loại bỏ điện áp thấp | |
| M | Motor-operated mechanism | Customer self-provided | ||
| Nam Úc | Travel switch of motor-operated mechanism | Customer self-provided | ||
| Fu | Fuse | Customer self-provided | ||
| PE | Grounding | |||
| N | Neutral line (N phase) | |||
| A, B, C | Phase line | |||
| For customer optional use of AX auxiliary switch form | AX | Auxiliary switch | ||

Wiring diagram of secondary circuit for SW1-1600-6300 circuitbreakers equipped with H type intelligent controllers (auxiliary :switch default configuration: 4 changeover contacts)

| Terminal Number | Function Description | Biểu tượng | Explanation | Những nhận xét |
| 1, 2 | Auxiliary power input: AC230V, AC400V, DC220V, DC110V |
SW1 | SW1 Universal Circuit Breaker | Customer self-provided |
| For DC power: 1 is (+), 2 is (-) | S1~S4 | Signal lamp | Customer self-provided | |
| 3, 4, 5 | Fault trip auxiliary contact, contact capacity: AC250V, 3A |
TA | Current transformer | |
| 10, 11 | Communication interface output, 10 is (+), 11 is (-) |
SAL | Micro switch | Customer self-provided |
| 12~15 | DO1, Programmable signal output, contact capacity: AC250V, 3A |
SB1 | Open button | Customer self-provided |
| 14, 15 | DO2, Programmable signal output, contact capacity: AC250V, 3A |
SB2 | Close button | Customer self-provided |
| 16, 17 | DO3, Trip signal output, contact capacity: AC250V, 3A |
X | Closing electromagnet | |
| 18, 19 | DO4, Closing signal output, contact capacity: AC250V, 3A |
F | Loại bỏ shunt | |
| 20 | Grounding (PE) | Q | Loại bỏ điện áp thấp | |
| 21, 22, 23, 24 | Voltage signal measurement, 21 connect N phase, 22 connect A phase, 23 connect B phase, 24 connect C phase |
M | Motor-operated mechanism | |
| 25, 26 | External N-phase transformer input | Nam Úc | Travel switch of motor-operated mechanism | Customer self-provided |
| 27, 28 | Loại bỏ điện áp thấp | Fu | Fuse | Customer self-provided |
| 29, 30 | Loại bỏ shunt | PE | Grounding | |
| 31, 32 | Closing electromagnet | N | Neutral line (N phase) | |
| 33, 34, 35 | Motor-operated mechanism (motor energy storage), 37 connect green wire, 38 connect black wire, 39 connect red wire |
A, B, C | Phase line | |
| 36~48 | Auxiliary contact terminal | AX | Auxiliary switch | |
| For customer optional use of AX auxiliary switch form | ST-DP Module |
Required for Profibus-DP communication | ||
| ST-DP Module |
Required for communication function | |||
| ST201 Rơle Module |
Required for communication function | |||

Kích thước (mm)
CQW2-1600 Series Fixed Type Overall Dimensions (Unit: mm)

| Độ dòng định mức | H (mm) |
| 200、400、630 | 6 |
| 800、1000 | 10 |
| 1250、1600 | 18 |
CQW2-1600 Series Drawout Type Installation Dimensions (Unit: mm)

| Độ dòng định mức | H (mm) |
| 200、400、630 | 6 |
| 800、1000 | 10 |
| 1250、1600 | 18 |
CQW2-1600 Series Fixed Type Overall Dimensions (Unit: mrm)

| Trong | a (mm) |
| 400~800A | 10 |
| 1000~1600A | 15 |
| 2000A | 20 |
CQW2-1600 Series Drawout Type Installation Dimensions (Unit: mm)

| Trong | a (mm) |
| 400~800A | 10 |
| 1000~1600A | 15 |
| 2000A | 20 |
CQW2-1600 Series Fixed Type Overall Dimensions (Unit: rnm)

| Trong | a (mm) | b (mm) |
| 2000,2500A | 20 | 408 |
| 2900~3200A | 30 | 428 |
CQW2-1600 Series Drawout Type Installation Dimensions (Unit: mm)

| Trong | a (mm) | b (mm) | c (mm) |
| 2000,2500A | 20 | 506 | 552 |
| 2900-3200A | 30 | 526 | 572 |
CQW2-4000 Series Drawout Type (3-Pole) Frame II Increased Capacity Type OvDimensions (Unit: mm)

CQW2-4000 Series Drawout Type (4-Pole) Overall Dimensions (Unit: mm)

CQW2-6300 Series (In=5000A, 4000A) Drawout Type Overall Dimensions (Unit: mm)

CQW2-6300 Series (In=6300A) Drawout Type (3-Pole) Overall Dimensions (Unit: mm)

CQW2 Series Enclosure Door Frame Outline and Irnstallation Dimensions (Unit: mm)

| Số hiệu mô hình | a | b | c |
| CQW2-2000 | 304 | 345 | 263 |
| CQW2-3200, 4000/3P | 366 | 405 | 325 |
| CQW2-4000/4P | 304 | 345 | 263 |
| CQW2-6300 | 366 | 405 | 325 |
Tại sao nên chọn CHAC
Với hơn 30 năm kinh nghiệm sản xuất, hơn 1100 nhân viên, hơn 100M cột
công suất hàng năm và 90% sản xuất tự động, CHAC cung cấp công suất sản xuất ổn định và nghiêm ngặt
kiểm soát chất lượng cho các khách hàng OEM/ODM trên toàn cầu. Hệ thống sản xuất nội bộ của chúng tôi hỗ trợ dài hạn
hợp tác cho các thương hiệu điện, nhà nhập khẩu và nhà phân phối.

30+
NĂM KINH NGHIỆM
Chuyên sản xuất thiết bị điện hạ thế

1100+
CÔNG NHÂN
Đội ngũ chuyên nghiệp đảm bảo chất lượng và giao hàng ổn định

100 triệu người
Sức chứa hàng năm của các cột
Năng lực sản xuất quy mô lớn để đáp ứng nhu cầu toàn cầu

90%
SẢN XUẤT TỰ ĐỘNG
Tự động hóa nâng cao cho hiệu quả cao và tính nhất quán

Dây chuyền lắp ráp tự động

Phòng thí nghiệm kiểm nghiệm

Xay và dập

Kiểm tra chất lượng





Hệ thống kiểm soát chất lượng nghiêm ngặt đảm bảo mọi sản phẩm đều đáp ứng các tiêu chuẩn toàn cầu.
Chúng tôi có thể tùy chỉnh những gì?
Các dịch vụ tùy chỉnh linh hoạt có sẵn cho kích thước vỏ tủ, cấu hình linh kiện,
yêu cầu về xây dựng thương hiệu và dự án.
Phần đính kèm
Thiết kế
Kích thước, cấu trúc và chi tiết lắp đặt của thiết bị được tùy chỉnh.

Về nội bộ
Cấu hình
Tùy chọn bố trí nội bộ và sắp xếp các thành phần linh hoạt.

Xây dựng thương hiệu &
Logo
Logo nhãn hiệu riêng, bảng tên và nhận diện thương hiệu.

Gói bao bì
Thiết kế
Dịch vụ sản xuất thùng carton, nhãn mác, hướng dẫn sử dụng và các giải pháp đóng gói tùy chỉnh.

Điện
Cấu hình
Thiết lập điện được điều chỉnh theo yêu cầu ứng dụng.

Chứng nhận
Hỗ trợ
Hỗ trợ các tiêu chuẩn và yêu cầu tuân thủ của thị trường mục tiêu.

Tải xuống
Máy cắt không khí dòng CQW2
Tổng quan đầy đủ về các linh kiện điện hạ thế và tài liệu tham khảo để lựa chọn sản phẩm.
Cần tài liệu kỹ thuật?
Hãy liên hệ với chúng tôi để nhận bảng thông số kỹ thuật, chứng chỉ, bản vẽ, hướng dẫn lựa chọn hoặc hỗ trợ các dự án OEM/ODM.
CQW2 Product FAQ
Where is the CQW2 ACB used?
It is intended for large low-voltage distribution positions such as incomers, bus couplers or feeders when the selected frame, controller and installation arrangement are suitable.
How do I choose the frame and current?
Use design current, service conditions, short-circuit study, selectivity, poles, mounting type and controller functions. Frame size alone is not sufficient.
What is Icu?
Icu is the rated ultimate short-circuit breaking capacity under the applicable product standard. Confirm the test voltage and exact variant before using the value in a design.
Fixed or drawout mounting?
Choose from the installation and maintenance strategy, required isolation and switchboard design. Verify the matching cradle and interlocks.
What controller options are available?
The CQW2 record identifies standard, electronic and communication controller options. Confirm protection functions and control voltage for the order.
How should an ACB be commissioned?
Test insulation, primary and secondary circuits, trip functions, interlocks, racking positions and coordination settings with qualified personnel.
Confirm the Right CQW2 Configuration
Vui lòng gửi thông tin chính xác về mẫu mã, điều kiện vận hành, số lượng, thị trường đích và các tài liệu cần thiết. CHAC sẽ xem xét yêu cầu dựa trên dữ liệu sản phẩm đã công bố.














