قواطع التيار المتردد للعلامات التجارية الكهربائية وصانعي المعدات

حلول تخصيص OEM/ODM لمنتجات التحكم الصناعي

توفر CHAC مفاتيح التوصيل الكهربائية لعلامات تجارية ومصنّعي المعدات الكهربائية. حدد وظيفة التبديل، والقيم الاسمية للدائرة الرئيسية، وجهد ملف الملفوف، وعدد نقاط التلامس، ثم اطّلع على السلسلة والإكسسوارات والعلامة التجارية. ولتجميع محرك التشغيل، أدرج مرحل الحماية من الحمل الزائد ومتطلبات الحماية في قائمة القطع.

خيارات قواطع التيار المتردد لمعداتك

اختر تكوين القاطع الكهربائي الذي يناسب المعدات قبل اعتماد التصميم الفني للعلامة التجارية. يجب تحديد مصدر طاقة الملف، وترتيب الملامسات، والملحقات لكل طراز؛ فالشكل الخارجي وحده لا يحدد المنتج.

إمداد الملف

حدد جهد التحكم، ونوع مصدر التغذية (تيار متردد أو تيار مستمر)، والتردد عند الاقتضاء. تأكد من رمز الملف المتاح لسلسلة القواطع الكهربائية المختارة.

تخصيص جهد الملف لخيارات جهد الملف للتيار المتردد والمستمر

ترتيب الاتصال

قم بإدراج الأقطاب الرئيسية وCONTACTS المفتوحة/المغلقة الإضافية بشكل منفصل. حدد أي الـ CONTACTS مدمجة وأيها تتطلب وحدة إضافية.

تخصيص الملامسات المساعدة لوظائف التحكم المختلفة

حمل وواجب التبديل

يُرجى تحديد جهد التشغيل، تيار الحمل، ونسبة التشغيل. بالنسبة للمحركات، يُراعى تضمين متطلبات بدء التشغيل، إيقاف التشغيل، التشغيل المتقطع، أو عكس الاتجاه، حسبما ينطبق.

تخصيص المعلمات الكهربائية لتصنيفات التيار ونطاقات الحماية

علامات العلامة التجارية والطراز

راجع رسومات الشعار جنبًا إلى جنب مع هوية الموديل والملف اللولبي. تأكد من أن التكوين المعتمد يظل واضحًا ومقروءًا عند التركيب وللطلبات المتكررة.

تخصيص العلامة التجارية للمنتج بما في ذلك شعارات الملصقات الخاصة ولوحات الأسماء

التعبئة والتعليمات

التحقق من صناديق الوحدات، وملصقات الكراتين ولغة التعليمات. اعتماد التعبئة والتغليف مع عينة المنتج قبل بدء الإنتاج.

تصميم تغليف مخصص يشمل علب، ملصقات، كتيبات، وحلول تغليف

الملحقات والتثبيت

تحقق من الأبعاد ومرحل الحماية الزائد المقترح، وكذلك الكتل المساعدة أو آلية التعشيق، مقابل السلسلة المختارة. لا يُعد التشابه في الشكل الخارجي دليلاً على التوافق.

دعم التطوير الهندسي من تحسين الرسومات إلى تطوير المنتج
خدمات التصنيع الأصلية والتصميم الأصلي

تغييرات في العلامة التجارية وتصميم المفاتيح الكهربائية

إن وضع العلامة التجارية على قاطع كهربائي موجود وتعديل تصميمه هما مشروعان مختلفان. يُرجى التأكد من التكوين أولاً، ثم الاتفاق على أعمال التخصيص والاعتماد.

Production equipment at CHAC Electric
التصنيع الأصلي / العلامة التجارية الخاصة

قم بوضع العلامة التجارية على قاطع التيار المتردد الحالي

يُرجى التأكد من وظيفة التبديل، والمواصفات الفنية للدائرة الرئيسية، ورمز الملف، ونوع الاتصالات. ثم مراجعة موقع الشعار، وبيانات التعريف، والتعليمات، وطريقة التعبئة والتغليف. يجب أن تكون العينة المعتمدة مطابقة تمامًا لتكوين الطلب.

أرسل طراز المنتج، ورمز الملف، وتفاصيل الاتصال، والكميات، بالإضافة إلى ملفات الشعار أو التصميم.
Manufacturing equipment at CHAC Electric
مراجعة التنمية / ODM

مراجعة تغيير في تصميم القاطع الكهربائي

بالنسبة للتغييرات في التصميم أو الوصلات أو التركيب، يُرجى إرسال متطلبات المعدات والرسومات التفصيلية. يجب الاتفاق على جدوى التنفيذ، وتوافق الملحقات، والاختبارات، ومسؤوليات الأدوات قبل اعتماد عينات التطوير.

صف تطبيق المعدات، وإمدادات التحكم، والتغييرات المقترحة.

من اختيار القاطع إلى اعتماد الإنتاج

حافظ على اتساق النموذج، والملف، وترتيب التوصيلات من مرحلة المراجعة الفنية وحتى اعتماد العينة والإنتاج.

01
تحديد التطبيق

قم بإدراج الحمل، وواجب التبديل، ومصدر التحكم، والكميات.

02
الاتفاق على النطاق

تأكيد أعمال توريد المفاتيح الكهربائية، والإكسسوارات، والعلامات التجارية.

03
مراجعة النموذج

تحقق من رموز الملفات، والاتصالات، والأبعاد، وتوافق الملحقات.

04
اعتماد العينة

قم بالموافقة على التكوين والتعريف والتغليف.

05
تأكيد متطلبات الإنتاج

تسجيل فحوصات التفتيش، ومراجع العينات، والمعالم الزمنية للتسليم.

06
إنتاج وتسليم

يُرجى تأكيد الكميات حسب رمز الملف، وشروط التعبئة والشحن.

منتج
04

قواطع التيار المتردد ومنتجات التحكم في المحركات

اختر المفاتيح الكهربائية التلامسية ذات التيار المتردد وفقًا لواجب التبديل المطلوب، ثم قم بمراجعة المرحلات الحرارية ووسائل حماية المحرك لتكتمل الدائرة. أما المفاتيح الكهربائية التلامسية ذات الجهد العالي المستمر فتحتاج إلى مواصفات خاصة بأحمال التيار المستمر ويجب اختيارها بشكل منفصل.

قم ببناء مجموعة من المفاتيح الكهربائية تحمل اسمك

أرسل متطلباتك المتعلقة بالمحرك أو المفاتيح، وجهد الملف، وقائمة الملحقات والكميات إلى شركة CHAC Electric للاطلاع عليها.

احصل على خطتك للتصنيع الأصلي (OEM) والتصميم الأصلي (ODM)
متطلبات الشراء

قم بمطابقة المُقَلِّط مع الحمل ودائرة التحكم.

تقوم الملامسات الرئيسية بتبديل الحمل؛ بينما تعمل الملف بالتحكم في القاطع الكهربائي. يجب تحديد كلا الدائرتين بشكل منفصل، ثم تأكيد الملامسات المساعدة ومساحة التركيب والملحقات الخاصة بالمعدات.

المواصفاتما يجب توفيرهما الذي يجب تأكيده
الحمل والواجبنوع الحمل، فئة الاستخدام ومتطلبات التبديلاستخدم التصنيف الخاص بالخدمة الفعلية. لا ينبغي استبدال قيمة تيار AC-1 بتصنيف خدمة المحرك AC-3.
الدائرة الرئيسيةجهد التشغيل، التيار، وترتيب الأقطاب الرئيسيةتحقق من هذه العناصر معًا في السلسلة المحددة. ينطبق قيمة قدرة المحرك فقط ضمن الجهد وظروف التشغيل المُحددة لها.
توريد الملفاتجهد التحكم، تيار متردد أو تيار مستمر، والتردديُرجى التأكد من رمز الملف الكامل. فجهد الدائرة الرئيسية لا يحدد جهد الملف المطلوب.
الاتصالات الإضافيةترتيب ووظيفة تحكم مطلوبة: مفتوح عادي / مغلق عاديقم بإدراج جهات الاتصال المدمجة والكتل المساعدة الإضافية بشكل منفصل.
التركيب والملحقاتالأبعاد، ترتيب التركيب، المرحل، المزامنة والمسافة البينيةتحقق من المجموعة لتحديد السلسلة الدقيقة. قد لا تكون الإكسسوارات التي تبدو متشابهة متوافقة.
متطلبات الطلبالكمية حسب الطراز والملف، السوق المستهدف، العلامات والتغليفاستخدم نفس المواصفات وإصدارات التصميم للعرض السعري، والعينة، وطلب الإنتاج.
الطلب وإعادة التوريد

Plan Contactor Supply for Your Equipment

Agree on the parts included, check the proposed model and keep a complete configuration reference for equipment builds and repeat orders.

CHAC Electric assembly facilities

List the Starter Parts You Need

As your AC contactor supplier, CHAC can review the selected series with the overload relays, auxiliary blocks or interlocks you need. Mark existing components that will remain in the equipment and identify the parts you want quoted. The proposed combination still needs model-specific compatibility and coordination checks; a contactor alone is not a complete protected motor starter.

Send the equipment parts list with included, existing and optional components clearly marked.

Testing facilities shown by CHAC Electric

Testing and Inspection for Your OEM/ODM Order

CHAC’s OEM/ODM customization quotation for industrial control products includes the costs of product compliance testing and reliability verification within the agreed project scope. Confirm the model, coil specification, load duty and any auxiliary contacts or accessories required. Agree on sample checks, testing scope and batch inspection records before approving the order. When comparing AC contactor manufacturers, use the same product specifications and testing scope, then confirm packaging and delivery requirements for your quantity.

Record the agreed testing scope, included costs, sample checks and inspection requirements in your OEM/ODM order.

CHAC Electric staff member operating inspection equipment

Record Coil Codes for Repeat Contactor Orders

As a magnetic contactor supplier, CHAC can review repeat orders using the complete model and coil code for each equipment version. Send the previous order reference with the auxiliary contacts, accessories and quantities you need. Highlight changes to the control supply or parts list so they can be reviewed against the approved configuration; the main current rating alone does not identify a replacement.

Use a separate approved part reference for each coil and contact arrangement.

Manufacturing and Inspection for Your Contactor Order

Your Brand. Our Manufacturing. Since 1995.

CHAC’s AC contactor factory supports supply for electrical brands and equipment builders. Share the model, coil code and operating duty so the order review can cover sample requirements, batch inspection records and packaging. Capacity and lead time are confirmed for the actual configuration and quantity; the company-wide figures below do not define an individual order’s delivery schedule.

30+

Years of Manufacturing

Low-voltage electrical manufacturing since 1995.

1100+

Employees Across CHAC

Company-wide team supporting manufacturing and engineering.

١٠٠ مليون+

Breaker Poles per Year

Company-wide breaker pole capacity; confirm output for your chosen series.

90%

Production Automation

Company-wide automation figure; process coverage varies by product line.

Figures shown are company-wide. Ask us about capacity and automation for the product line you need.

خط التجميع الآلي

خط التجميع الآلي

مختبر اختبار

مختبر اختبار

حقن وختم

حقن وختم

فحص الجودة

فحص الجودة

طرف كهربائي

طرف كهربائي

صندوق توزيع

صندوق توزيع

قاطع دائرة مغلق

قاطع دائرة مغلق

تحكم صناعي كهربائي

تحكم صناعي كهربائي

Procurement FAQ

Motor Control Product Procurement Questions

Resolve questions about switching duty, coil supply and starter components before approving a contactor order.

CHAC Electric company building
Should I use AC-1 or AC-3 to select a motor contactor?

Use the rating for the actual duty and voltage. AC-1 generally covers non-inductive or slightly inductive loads; AC-3 covers defined starting and stopping of squirrel-cage motors. An AC-1 current is not a substitute for the AC-3 rating. Send jogging, reversing or frequent-switching requirements to CHAC for a separate review.

Can a contactor with a DC coil switch an AC load?

Yes, when the specific contactor and coil combination supports the application. The control supply and switched load are separate circuits. Give CHAC the load ratings and the coil voltage, supply type and applicable frequency; AC and DC coils should not be assumed interchangeable.

Does NC refer to the main contacts or auxiliary contacts?

Confirm which contacts the description means. Record the main pole arrangement separately from the auxiliary NO/NC contacts and their control functions. An NC auxiliary contact does not make the main power contacts normally closed. Include both arrangements in the specification sent to CHAC.

Is motor power enough to select a contactor for jogging or reversing?

No. Include motor voltage and current, starting method, switching frequency and the actual jogging or reversing duty. CHAC also needs to review the utilization category, interlocks and protection arrangement. A power rating quoted for another duty or voltage does not establish suitability.

How do I check contactor, overload relay and circuit protection compatibility?

Send the exact contactor, relay and short-circuit protective device models, together with the project fault level. Check mounting, relay adjustment range and coordination evidence for that combination. Mechanical fit alone does not prove coordinated protection. Keep the approved models and drawings with the equipment specification.

Does lead time mean production completion, dispatch or arrival?

Ask which milestone the quoted date covers: production completion, inspection release, carrier handover, departure or arrival. Record it with the required approvals and named place or port. CHAC’s production commitment and an estimated transit time are different parts of the delivery schedule.

Procurement resources

Contactor & Motor Control Buying Guides

Check switching duty, coil requirements and starter components before requesting a contactor quotation.

DC contactor sourcing

How to Source a DC Contactor

Use one duty specification to compare supplier proposals for voltage, switching requirements and coil options.

RFQ preparation

Specifying a Motor Contactor

Prepare motor data, switching duty and protection requirements, then compare supplier support and total cost.

Discuss Your Contactor Supply & OEM Requirements

Send the load duty, operating ratings, coil supply, contact arrangement and quantity for each configuration. Include accessories and a mounting drawing where needed. CHAC can then review the product selection, branding and packing requirements as one order.

تركيبة منتج CHAC

What to Include in Your Enquiry

Load / duty · Voltage / current · Coil voltage / AC or DC / frequency · Contacts · Accessories · Quantity · Market

See the specification checklist →

Send Your Contactor Requirements

نموذج اتصال تجريبي