حلول تخصيص OEM/ODM لمنتجات التحكم الصناعي
توفر CHAC مفاتيح التوصيل الكهربائية لعلامات تجارية ومصنّعي المعدات الكهربائية. حدد وظيفة التبديل، والقيم الاسمية للدائرة الرئيسية، وجهد ملف الملفوف، وعدد نقاط التلامس، ثم اطّلع على السلسلة والإكسسوارات والعلامة التجارية. ولتجميع محرك التشغيل، أدرج مرحل الحماية من الحمل الزائد ومتطلبات الحماية في قائمة القطع.
خيارات قواطع التيار المتردد لمعداتك
اختر تكوين القاطع الكهربائي الذي يناسب المعدات قبل اعتماد التصميم الفني للعلامة التجارية. يجب تحديد مصدر طاقة الملف، وترتيب الملامسات، والملحقات لكل طراز؛ فالشكل الخارجي وحده لا يحدد المنتج.
إمداد الملف
حدد جهد التحكم، ونوع مصدر التغذية (تيار متردد أو تيار مستمر)، والتردد عند الاقتضاء. تأكد من رمز الملف المتاح لسلسلة القواطع الكهربائية المختارة.
ترتيب الاتصال
قم بإدراج الأقطاب الرئيسية وCONTACTS المفتوحة/المغلقة الإضافية بشكل منفصل. حدد أي الـ CONTACTS مدمجة وأيها تتطلب وحدة إضافية.
حمل وواجب التبديل
يُرجى تحديد جهد التشغيل، تيار الحمل، ونسبة التشغيل. بالنسبة للمحركات، يُراعى تضمين متطلبات بدء التشغيل، إيقاف التشغيل، التشغيل المتقطع، أو عكس الاتجاه، حسبما ينطبق.
علامات العلامة التجارية والطراز
راجع رسومات الشعار جنبًا إلى جنب مع هوية الموديل والملف اللولبي. تأكد من أن التكوين المعتمد يظل واضحًا ومقروءًا عند التركيب وللطلبات المتكررة.
التعبئة والتعليمات
التحقق من صناديق الوحدات، وملصقات الكراتين ولغة التعليمات. اعتماد التعبئة والتغليف مع عينة المنتج قبل بدء الإنتاج.
الملحقات والتثبيت
تحقق من الأبعاد ومرحل الحماية الزائد المقترح، وكذلك الكتل المساعدة أو آلية التعشيق، مقابل السلسلة المختارة. لا يُعد التشابه في الشكل الخارجي دليلاً على التوافق.
تغييرات في العلامة التجارية وتصميم المفاتيح الكهربائية
إن وضع العلامة التجارية على قاطع كهربائي موجود وتعديل تصميمه هما مشروعان مختلفان. يُرجى التأكد من التكوين أولاً، ثم الاتفاق على أعمال التخصيص والاعتماد.

قم بوضع العلامة التجارية على قاطع التيار المتردد الحالي
يُرجى التأكد من وظيفة التبديل، والمواصفات الفنية للدائرة الرئيسية، ورمز الملف، ونوع الاتصالات. ثم مراجعة موقع الشعار، وبيانات التعريف، والتعليمات، وطريقة التعبئة والتغليف. يجب أن تكون العينة المعتمدة مطابقة تمامًا لتكوين الطلب.

مراجعة تغيير في تصميم القاطع الكهربائي
بالنسبة للتغييرات في التصميم أو الوصلات أو التركيب، يُرجى إرسال متطلبات المعدات والرسومات التفصيلية. يجب الاتفاق على جدوى التنفيذ، وتوافق الملحقات، والاختبارات، ومسؤوليات الأدوات قبل اعتماد عينات التطوير.
من اختيار القاطع إلى اعتماد الإنتاج
حافظ على اتساق النموذج، والملف، وترتيب التوصيلات من مرحلة المراجعة الفنية وحتى اعتماد العينة والإنتاج.
قم بإدراج الحمل، وواجب التبديل، ومصدر التحكم، والكميات.
تأكيد أعمال توريد المفاتيح الكهربائية، والإكسسوارات، والعلامات التجارية.
تحقق من رموز الملفات، والاتصالات، والأبعاد، وتوافق الملحقات.
قم بالموافقة على التكوين والتعريف والتغليف.
تسجيل فحوصات التفتيش، ومراجع العينات، والمعالم الزمنية للتسليم.
يُرجى تأكيد الكميات حسب رمز الملف، وشروط التعبئة والشحن.
قواطع التيار المتردد ومنتجات التحكم في المحركات
اختر المفاتيح الكهربائية التلامسية ذات التيار المتردد وفقًا لواجب التبديل المطلوب، ثم قم بمراجعة المرحلات الحرارية ووسائل حماية المحرك لتكتمل الدائرة. أما المفاتيح الكهربائية التلامسية ذات الجهد العالي المستمر فتحتاج إلى مواصفات خاصة بأحمال التيار المستمر ويجب اختيارها بشكل منفصل.
قم ببناء مجموعة من المفاتيح الكهربائية تحمل اسمك
أرسل متطلباتك المتعلقة بالمحرك أو المفاتيح، وجهد الملف، وقائمة الملحقات والكميات إلى شركة CHAC Electric للاطلاع عليها.
احصل على خطتك للتصنيع الأصلي (OEM) والتصميم الأصلي (ODM)قم بمطابقة المُقَلِّط مع الحمل ودائرة التحكم.
تقوم الملامسات الرئيسية بتبديل الحمل؛ بينما تعمل الملف بالتحكم في القاطع الكهربائي. يجب تحديد كلا الدائرتين بشكل منفصل، ثم تأكيد الملامسات المساعدة ومساحة التركيب والملحقات الخاصة بالمعدات.
| المواصفات | ما يجب توفيره | ما الذي يجب تأكيده |
|---|---|---|
| الحمل والواجب | نوع الحمل، فئة الاستخدام ومتطلبات التبديل | استخدم التصنيف الخاص بالخدمة الفعلية. لا ينبغي استبدال قيمة تيار AC-1 بتصنيف خدمة المحرك AC-3. |
| الدائرة الرئيسية | جهد التشغيل، التيار، وترتيب الأقطاب الرئيسية | تحقق من هذه العناصر معًا في السلسلة المحددة. ينطبق قيمة قدرة المحرك فقط ضمن الجهد وظروف التشغيل المُحددة لها. |
| توريد الملفات | جهد التحكم، تيار متردد أو تيار مستمر، والتردد | يُرجى التأكد من رمز الملف الكامل. فجهد الدائرة الرئيسية لا يحدد جهد الملف المطلوب. |
| الاتصالات الإضافية | ترتيب ووظيفة تحكم مطلوبة: مفتوح عادي / مغلق عادي | قم بإدراج جهات الاتصال المدمجة والكتل المساعدة الإضافية بشكل منفصل. |
| التركيب والملحقات | الأبعاد، ترتيب التركيب، المرحل، المزامنة والمسافة البينية | تحقق من المجموعة لتحديد السلسلة الدقيقة. قد لا تكون الإكسسوارات التي تبدو متشابهة متوافقة. |
| متطلبات الطلب | الكمية حسب الطراز والملف، السوق المستهدف، العلامات والتغليف | استخدم نفس المواصفات وإصدارات التصميم للعرض السعري، والعينة، وطلب الإنتاج. |
Plan Contactor Supply for Your Equipment
Agree on the parts included, check the proposed model and keep a complete configuration reference for equipment builds and repeat orders.

List the Starter Parts You Need
As your AC contactor supplier, CHAC can review the selected series with the overload relays, auxiliary blocks or interlocks you need. Mark existing components that will remain in the equipment and identify the parts you want quoted. The proposed combination still needs model-specific compatibility and coordination checks; a contactor alone is not a complete protected motor starter.

Testing and Inspection for Your OEM/ODM Order
CHAC’s OEM/ODM customization quotation for industrial control products includes the costs of product compliance testing and reliability verification within the agreed project scope. Confirm the model, coil specification, load duty and any auxiliary contacts or accessories required. Agree on sample checks, testing scope and batch inspection records before approving the order. When comparing AC contactor manufacturers, use the same product specifications and testing scope, then confirm packaging and delivery requirements for your quantity.

Record Coil Codes for Repeat Contactor Orders
As a magnetic contactor supplier, CHAC can review repeat orders using the complete model and coil code for each equipment version. Send the previous order reference with the auxiliary contacts, accessories and quantities you need. Highlight changes to the control supply or parts list so they can be reviewed against the approved configuration; the main current rating alone does not identify a replacement.
Manufacturing and Inspection for Your Contactor Order
Your Brand. Our Manufacturing. Since 1995.
CHAC’s AC contactor factory supports supply for electrical brands and equipment builders. Share the model, coil code and operating duty so the order review can cover sample requirements, batch inspection records and packaging. Capacity and lead time are confirmed for the actual configuration and quantity; the company-wide figures below do not define an individual order’s delivery schedule.
Years of Manufacturing
Low-voltage electrical manufacturing since 1995.
Employees Across CHAC
Company-wide team supporting manufacturing and engineering.
Breaker Poles per Year
Company-wide breaker pole capacity; confirm output for your chosen series.
Production Automation
Company-wide automation figure; process coverage varies by product line.
Figures shown are company-wide. Ask us about capacity and automation for the product line you need.
خط التجميع الآلي
مختبر اختبار
حقن وختم
فحص الجودة
طرف كهربائي
صندوق توزيع
قاطع دائرة مغلق
تحكم صناعي كهربائي
Motor Control Product Procurement Questions
Resolve questions about switching duty, coil supply and starter components before approving a contactor order.

Should I use AC-1 or AC-3 to select a motor contactor?
Use the rating for the actual duty and voltage. AC-1 generally covers non-inductive or slightly inductive loads; AC-3 covers defined starting and stopping of squirrel-cage motors. An AC-1 current is not a substitute for the AC-3 rating. Send jogging, reversing or frequent-switching requirements to CHAC for a separate review.
Can a contactor with a DC coil switch an AC load?
Yes, when the specific contactor and coil combination supports the application. The control supply and switched load are separate circuits. Give CHAC the load ratings and the coil voltage, supply type and applicable frequency; AC and DC coils should not be assumed interchangeable.
Does NC refer to the main contacts or auxiliary contacts?
Confirm which contacts the description means. Record the main pole arrangement separately from the auxiliary NO/NC contacts and their control functions. An NC auxiliary contact does not make the main power contacts normally closed. Include both arrangements in the specification sent to CHAC.
Is motor power enough to select a contactor for jogging or reversing?
No. Include motor voltage and current, starting method, switching frequency and the actual jogging or reversing duty. CHAC also needs to review the utilization category, interlocks and protection arrangement. A power rating quoted for another duty or voltage does not establish suitability.
How do I check contactor, overload relay and circuit protection compatibility?
Send the exact contactor, relay and short-circuit protective device models, together with the project fault level. Check mounting, relay adjustment range and coordination evidence for that combination. Mechanical fit alone does not prove coordinated protection. Keep the approved models and drawings with the equipment specification.
Does lead time mean production completion, dispatch or arrival?
Ask which milestone the quoted date covers: production completion, inspection release, carrier handover, departure or arrival. Record it with the required approvals and named place or port. CHAC’s production commitment and an estimated transit time are different parts of the delivery schedule.
Contactor & Motor Control Buying Guides
Check switching duty, coil requirements and starter components before requesting a contactor quotation.
How to Source a DC Contactor
Use one duty specification to compare supplier proposals for voltage, switching requirements and coil options.
MCC Contactor Checks Before Ordering
Review the contactor, coil, auxiliaries, overload arrangement and coordination documents as a complete starter.
Specifying a Motor Contactor
Prepare motor data, switching duty and protection requirements, then compare supplier support and total cost.
Discuss Your Contactor Supply & OEM Requirements
Send the load duty, operating ratings, coil supply, contact arrangement and quantity for each configuration. Include accessories and a mounting drawing where needed. CHAC can then review the product selection, branding and packing requirements as one order.
What to Include in Your Enquiry
Load / duty · Voltage / current · Coil voltage / AC or DC / frequency · Contacts · Accessories · Quantity · Market
See the specification checklist →