لنفترض وجود موزع كهربائي افتراضي في مانيلا يقوم بمقارنة عرضين لسعر قاطع دائرة كهربائية مصغر من نوع 32. تختلف أسعار الوحدات، وكذلك عدد الأقطاب وقدرة القطع المعلنة. كما أن أحد العروض يفترض كمية طلب أكبر بكثير. إن الترتيب السعري البسيط قد يفضّل منتجاً مختلفاً والتزاماً شرائياً مختلفاً. يحتاج المقارنة إلى مواصفات متفق عليها قبل أن تحتاج إلى مورّد مفضل.
ملخص: قارن أسعار MCB فقط بعد مطابقة التيار المقنن، والأقطاب، ومنحنى الفصل، ونوع التشغيل (AC أو DC)، وجهد التشغيل، وقدرة القطع، والمعيار القياسي للمنتج. إن وجود ملصق 10 A أو 32 A وحده غير كافٍ. بعد ذلك، قارن الكمية، والإكسسوارات المرفقة، وطرق التعبئة والتغليف، وشروط التسليم لتحديد تكلفة الطلب الفعلي.
قارن عدد الأقطاب ومنحنى التحرير لقاطع الدائرة المصبوبة قبل مقارنة الأسعار.
A سعر قاطع الدائرة المصغّر لا يكون ذلك ذا معنى إلا بالنسبة لتكوين محدد يمكن التعرف عليه. سجّل رمز الطلب الكامل، بما في ذلك القيمة الاسمية والتيار المقنن، بدلاً من الاعتماد على صورة فوتوغرافية أو وصف القاطع المصغّر. اطلب من الموردين الإشارة إلى أي انحرافات عن مواصفاتك بدلاً من تسعير أقرب خيار متاح لديهم دون إشعار.
لأجل سعر قاطع الدائرة الكهربائية 10 عند الاستفسار، يرجى تحديد ما إذا كان الدائرة تحتاج إلى قطب واحد أم عدة أقطاب، وما هو جهد التغذية، وما هي وظائف الحماية والتبديل المطلوبة. لا تعتبر الوحدة 1P والوحدة 2P متكافئتين لمجرد أن كلاهما يحملان التصنيف 10 A. وبالمثل، فإن توصيفات 1P+N و2P تتطلب توضيح الأقطاب المحمية والمُبَدَّلة.
منحنى التحرير هو خيار منفصل. تتعلق المنحنيات B وC وD بخصائص تحرير مغناطيسية مختلفة. اخترها بما يتناسب مع متطلبات التيار الابتدائي وظروف الفصل في الدائرة الكهربائية. لا يجوز استبدال منحنى أقل تكلفة أو منحنى يمنع التحرير غير المبرر دون التحقق من كفاية الحماية. دليل منحنيات قاطع الدائرة المصغّر (MCB) يشرح مسألة الاختيار بمزيد من التفصيل.
| المواصفات | ما الذي يجب تدوينه في ورقة المقارنة؟ | عدم تطابق شائع |
|---|---|---|
| الحالي | خيار التيار المقنن الدقيق | استخدام الحد الأقصى للإطار أو السلسلة بدلاً من ذلك |
| أقطاب | الأقطاب المحمية والمُحوَّلة المطلوبة | معاملة 1P+N و2P على أنهما متكافئان تلقائيًا |
| منحنى | الخاصية المطلوبة B أو C أو D، عند الاقتضاء | قبول منحنى مختلف لخفض السعر |
| الواجب الكهربائي | تيار متردد أو تيار مستمر، مع ذكر جهد التشغيل والتردد عند الاقتضاء | استخدام جهد العزل كجهد تشغيل |
| كسر الواجب | القيمة المعلنة، الجهد الكهربائي، والأساس القياسي | مقارنة قيم kA دون مراعاة شروطها |
ال سعر MCB يجب إرفاق ذلك بهذه المواصفات الكاملة. وفي حال وجود أكثر من خيار مقبول تقنيًا، تُقارَن هذه الخيارات كبدائل وتوضَح الفروق بينها. ويكون هذا الأمر مفيدًا بشكل خاص لمجموعات المنتجات التي يوفرها الموزعون، والتي تشمل عدة تركيبات من عدد الأقطاب ومنحنى التفعيل ضمن عائلة منتج واحدة.

لماذا تحتاج تصنيفات الجهد وقدرة القطع لقواطع الدائرة المصبوبة إلى معيار محدد؟
لا يجوز افتراض مناسبة قاطع التيار المتردد للاستخدام في الدوائر ذات التيار المستمر لمجرد تطابق تصنيفه الأمبيري. إذ تختلف ظروف القطع والترتيبات المعلنة للدائرة. يجب الحصول على تصنيف التيار المستمر ومتطلبات التركيب الخاصة بالمنتج من الشركة المصنعة عند استخدامه في دوائر التيار المستمر. كما أن الحجم الفعلي للمنتج لا يثبت إمكانية استبداله بين هذين النوعين من التطبيقات.
وبالمثل، فإن جهد العزل المقنن (Ui) لا يُعد بديلاً عن جهد التشغيل المقنن (Ue). عندما يتضمن العرض رقمًا واضحًا للجهد، اسأل عن المقصود منه. تأكد من جهد التشغيل الخاص بالأقطاب المطلوبة وبالتطبيق المعني قبل مقارنة قدرة القطع.
IEC 60898-1 و IEC 60947-2 هما سياقان مختلفان للمعايير الخاصة بالمنتجات. يصف IEC 60947-2:2024 قواطع الدائرة المصممة للتركيب والتشغيل من قبل أشخاص مدرَّبين أو ذوي مهارة. قد تحتوي إحدى النماذج على بيانات معلنة وفق أكثر من معيار واحد، لكن يجب أن تحدد الأدلة التكوين الدقيق وأساس التصنيف. لا تُعيد تسمية Icu أو Ics إلى Icn لمجرد أن عرض الأسعار يستخدم كلمة MCB.
يُعد هذا التمييز عمليًا عند الشراء: فوصف موجز مثل قاطع كهربائي 6 يكون غير مكتمل بدون ذكر المواصفة القياسية والجهد والنوع المرتبطين به. اطلب ورقة البيانات المعمول بها والسجلات الداعمة. إن شهادة عامة لمورد أو لعائلة منتجات أخرى لا تثبت مطابقة الجهاز المطلوب.
Include accessories and delivery when comparing MCB order costs
A 32 amp circuit breaker price can change with quantity, packaging and the selected options. Keep the technical specification constant while comparing those commercial terms. Separate sample pricing from the repeat-order quantity, and distinguish a target quantity from a binding minimum order.
Include the accessories the actual assembly requires. A comb busbar, auxiliary contact or lockout device cannot be treated as compatible simply because it fits in a catalogue photograph. Ask for the exact approved accessory and establish whether it is included. If an alternative device requires a new busbar or enclosure arrangement, include that engineering and material cost.
| Order item | توضيح مطلوب | لماذا هذا مهم |
|---|---|---|
| Quantity and assortment | Quantity per rating, pole and curve | A mixed order may not use one headline unit price |
| Packaging and labels | Approved carton, marking and document scope | Custom work can change cost and preparation time |
| الملحقات | Exact compatible item and included quantity | A missing accessory can change the installed cost |
| Delivery | Trade rule, named place and freight responsibility | Ex-works and delivered offers cover different costs |
| Quality and claims | Acceptance process, traceability and written remedy | Returns and sorting costs affect the result |
For illustration only, an apparent USD 0.20 saving on 500 devices equals USD 100. If the alternative requires USD 150 of additional compatible connection hardware, the purchase is USD 50 more expensive before any labour difference. These hypothetical figures show the comparison method; they are not current MCB market prices or CHAC quotations.
Use the ICC Incoterms 2020 rule and a precise named place where appropriate. FOB is specific to sea and inland-waterway transport, not a general synonym for export price. Freight, insurance, duties, taxes, payment and warranty responsibilities should be clear in the offer and contract. Do not assume the trade rule settles every commercial issue.

What to specify when requesting a PXB6 MCB quotation
شركة CHAC PXB6-63 product page lists 6, 10, 16, 20, 25, 32, 40, 50 and 63 A options, with 1P, 2P, 3P and 4P arrangements and B, C and D curves. Those published choices make a useful starting point for a quotation. They do not establish that every option is in stock or shares one price.
The page lists 500 V as rated insulation voltage and describes its short-circuit data as 6 kA Icu = Ics while referencing IEC 60898-1. For a purchase requiring a particular IEC 60898-1 Icn declaration, request the corresponding model-specific evidence. Preserve the manufacturer’s terminology in the enquiry and resolve the rating basis rather than assuming the labels are interchangeable.
Send current, curve, poles, system voltage, required fault duty, destination and quantity by configuration. Add document, packaging and accessory requirements. After technical review, keep the accepted model code and specification with the purchase order, and require approval for changes to the supplied configuration.
IEC 61439-1’s assembly requirements are relevant when these components are incorporated into a distribution assembly. Selecting a suitable MCB is one part of that work. It does not replace conductor calculations, assembly verification or local installation requirements. Consider those responsibilities before accepting a component substitution solely for price.
Common questions about comparing MCB prices
Why do miniature circuit breaker prices vary for the same current rating?
The devices may differ in poles, curve, electrical duty, breaking rating, standard basis and accessory scope. Quantity, packaging and delivery terms can also differ. Match those items before drawing conclusions about supplier pricing.
What should be compared before buying a 10A or 32A MCB on price?
Compare the complete order code, poles, curve, operating voltage, AC or DC duty, breaking rating and relevant compliance records. Then align quantity and delivered scope. Check that the selected device meets the circuit design rather than choosing current from price alone.
How do pole count and trip curve affect the MCB specification?
Pole configuration determines which conductors are switched and protected together. The curve affects magnetic tripping behaviour. Both must match the supply and protection design, and neither should be changed silently during quotation.
Can an AC MCB and a DC MCB be compared as interchangeable products?
No. The device must have a declared rating for the intended supply and installation arrangement. Equal current and similar dimensions do not establish equivalent interruption capability. Use the manufacturer’s application instructions.
Why should the applicable protection standard be checked on a low-price MCB?
It defines the rating and test context against which the product is declared. An attractive kA number without its standard and voltage can be misleading. Confirm evidence for the ordered model and destination requirements.
Does the advertised MCB price include the required accessories and order quantity?
Not necessarily. Advertised pricing may apply to a particular quantity or a basic device without accessories. Request a written offer stating the exact assortment, compatible accessories, packaging and minimum order conditions.
How can buyers compare delivered cost for an identical miniature circuit breaker specification?
Use the same accepted specification and quantity for each offer. Add excluded required accessories, freight, import costs and any resulting assembly changes on a consistent basis. Compare written warranty and acceptance terms separately from the unit-price calculation.
المراجع
- IEC 60947-2:2024: declared circuit-breaker scope.
- IEC 61439-1:2020: low-voltage assembly requirements.
- International Chamber of Commerce: Incoterms 2020 rules.
Confirm the specification before comparing the saving. Send CHAC your MCB ratings, quantities and delivery requirements to obtain a clearly defined quotation.



