PXB2Ln-63 RCBO (Residual Current Circuit Breaker) OEM Manufacturer
Der PXB2Ln-63 RCBO Liefert Überspannungsschutz, Kurzschluss- und Reststromschutz im Bereich der angegebenen Werte von 6 A bis 63 A. Die Auswahl sollte auf der Schaltungspannung, dem Leiter, dem Lastverhalten, der prognostizierten Fehlerstrom und den geltenden Installationsregeln basieren – nicht allein auf der Ampere-Nennleistung.
Produktübersicht
PXB2Ln-63 is an RCBO for 230V AC distribution circuits. It combines thermal-magnetic overcurrent protection with residual-current protection in one device. The published range covers 6A–63A, 1P+N, B / C curves and 30mA sensitivity options. The saved model data describes the residual-current or construction type as Type AC / Type A.
The PXB2Ln-63 can be specified as a Type AC RCBO or Type A DIN rail RCBO when its verified 30mA and 1P+N configuration suits the circuit.
The saved model record lists IEC/EN 61009-1 as the applicable standard reference. No certification claim is added beyond the saved model record.
Hauptmerkmale
Typische Anwendungen
Typical use is in final or sub-distribution circuits where both overcurrent and residual-current protection are required. The project must still confirm the expected residual-current waveform, sensitivity, neutral arrangement, pole configuration, fault level, conductor size, enclosure conditions and local wiring rules.
Antragsformular und Auswahlhinweis
Use the verified model values below to create a shortlist, then validate the complete circuit. Product ratings do not replace conductor calculations, a fault-current study, coordination review or local installation requirements.
| Auswahlpunkt | PXB2Ln-63 reference | Was das Projekt bestätigen muss |
|---|---|---|
| Bemessener Strom | 6A–63A | Design current, conductor ampacity, installation method, ambient temperature and grouping |
| Voltage and frequency | 230V AC; 50/60Hz | Supply system and equipment rating |
| Polenkonfiguration | 1P+N | Conductors to be switched/protected, including neutral treatment |
| Tripkurve | B / C | Load inrush and required disconnection performance |
| Residual-current selection | 30mA; Type AC / Type A | Expected waveform, sensitivity, purpose and local rules |
| Ausschaltvermögen | 6kA | Prospective short-circuit current and protection coordination |
Schutzbereich
An RCBO combines overcurrent and residual-current protection; it is not simply an MCB with a different label.
MCB vs RCBO
Compare Protection Functions →
Residual-Current Selection
Published options: 30mA. Confirm sensitivity and waveform type for the actual circuit and market.
Sensitivity & Type
Review Selection Support →
Breaking Capacity and Curve
6kA; B / C curves. Both fault level and load inrush must be checked.
Fault Level & Inrush
Vergleichen Sie die Bruchfestigkeit →
Pole and Wiring Arrangement
Published pole options: 1P+N. Use the exact model diagram; do not assume neutral routing.
Poles & Neutral
Confirm Wiring Data →
Anleitung zum Bestellen
- Specify the exact model: PXB2Ln-63.
- State the required current rating within 6A–63A.
- Confirm pole arrangement: 1P+N.
- Confirm trip curve: B / C.
- Confirm residual-current sensitivity and type from the published 30mA options.
- Provide system voltage, expected fault level, destination market, quantity and document requirements.
Installations- und Koordinationskontrollen
- Use the exact model drawing and instructions; do not infer supply direction, neutral routing or terminal positions from another product.
- Verify conductor material and cross-section against the circuit calculation and published terminal data.
- Confirm fault level, upstream/downstream coordination, enclosure temperature, grouping, altitude and clearances.
- Die Installation, die Isolierung, die Prüfung und die Instandhaltung müssen von qualifiziertem Personal unter den geltenden Vorschriften durchgeführt werden.
Typbezeichnung
Kurvenverlauf
Abmessungen (mm)
Technische Spezifikationen
| Parameter | |
| Nennstrom (In) | 6A, 10A, 16A, 20A, 25A, 32A, 40A, 50A, 63A |
| Rated Voltage | 230V~ |
| Bemessene Frequenz | 50/60Hz |
| Rated Breaking Capacity | 6kA |
| Tripping Type | Thermal-magnetic (for overload and short-circuit) |
| Residual Current Operating Characteristic | AC, A |
| Rated Residual Operating Current (IΔn) | 30mA |
| Rated Residual Non-Operating Current (IΔno) | 15mA |
| Instantaneous Tripping Type | B, C |
| Anzahl der Polen | 1P+N |
| Rated Impulse Withstand Voltage (Uimp) | 4kV (1.2/50 μs wave) |
| Power Frequency Withstand Voltage Test | 2kV for 1 minute |
| Thermal Tripping Characteristic | (1.13-1.45) x In |
| Magnetic Tripping Characteristic | B: (3-5) x In, C: (5-10) x In |
| Elektrischer Widerstand | 6,000 cycles |
| Mechanische Belastbarkeit | 10,000 cycles |
| Contact Position Indicator | Ja |
| Degree of Protection | IP20 |
| Ambient Temperature | -25℃ to +40℃, max. humidity 95% |
| Maximum Cable Terminal Size | 16mm² |
| Maximum Tightening Torque | 2.5 N.m |
| Mounting Method | Mounts on 35mm DIN rail |
| Standard | IEC/EN 61009-1 |
Leitungseigenschaften und Querschnitt
| Copper cross-section(mm2) | Nennstrom In(A) |
| 1 | In ≤6 |
| 1.5 | 6<In<13 |
| 2.5 | 13<In≤20 |
| 4 | 20<In≤25 |
| 6 | 25<In≤32 |
| 10 | 32<In≤50 |
| 16 | 50<In≤63 |
Warum CHAC wählen?
Mit mehr als 30 Jahren Erfahrung in der Fertigung, 1100 Mitarbeitern und 100 Millionen Polen
Mit einer jährlichen Kapazität von 90% automatisierten Produktionslinien bietet CHAC eine stabile Produktionskapazität und strenge Qualitätskontrollen.
Qualitätskontrolle für globale OEM-/ODM-Kunden. Unser internes Fertigungssystem ermöglicht eine langfristige Zusammenarbeit.
Kooperation für Elektrohersteller, Importeure und Händler.
30+
JAHRE ERFAHRUNG
Specialisiert auf die Herstellung von Niederspannungselektronik
1100+
ARBEITER
Das professionelle Team gewährleistet eine stabile Qualität und Lieferfähigkeit.
100 Millionen+
JAHRESTERNE VON POLES
Großserienfertigung zur Deckung der weltweiten Nachfrage
90%
AUTOMATISCHE PRODUZIERUNG
Erweiterte Automatisierung für hohe Effizienz und Konsistenz
Automatisierte Montagelinie
Testlabor
Injektion und Stempeln
Qualitätskontrolle
Ein strenges Qualitätskontrollsystem gewährleistet, dass jedes Produkt den globalen Standards entspricht.
Was können wir anpassen?
For PXB2Ln-63 projects, CHAC can review private-label marking, packaging, approved appearance options, published 6A–63A electrical configurations and technical-document requirements. Requests outside the published range are subject to engineering evaluation, testing, minimum order quantity and project feasibility.
Logo & Branding
Die Optionen für die Kennzeichnung mit dem eigenen Label und die Aufschrift auf dem Plakat unterliegen einer Prüfung der Grafik und der Genehmigung des Probenmaterials.
Verpackung
Anpassung
Kartonagen, Etiketten und Handbücher können für die genehmigte Bestellspezifikation und den Zielmarkt vorbereitet werden.
Elektrisch
Anpassung
Select from the published 6A–63A, 1P+N and B / C options; non-standard requests require technical evaluation.
Produkt
Aussehen
Appearance options can be reviewed subject to tooling, minimum order quantity, marking requirements and technical feasibility.
Zertifizierung
Support
Für die entsprechende genehmigte Konfiguration werden Datenblätter, Zeichnungen und verifizierte Zertifikatinformationen bereitgestellt.
Ingenieurwesen
Entwicklung
Die Projektunterstützung kann Folgendes umfassen: Konstruktionsüberprüfung, Musterbewertung, Testen und Produktionsplanung – vorbehaltlich technischer Genehmigung.
Herunterladen
PXB2-Serie Miniaturstromschutzschalter
Komplettes Produktüberblick für Niederspannungselektronikkomponenten und Referenz zur Produktauswahl.
Brauchen Sie technische Dokumente?
Kontaktieren Sie uns für Datenblätter, Zertifikate, Zeichnungen, Auswahlberatung oder Unterstützung bei OEM-/ODM-Projekten.
PXB2Ln-63 Product FAQ
What is the PXB2Ln-63 RCBO?
The PXB2Ln-63 combines overload and short-circuit protection with residual-current protection. Its verified range is 6A–63A with 1P+N configurations; the exact ordered option must match the circuit and local rules.
How does the PXB2Ln-63 RCBO work?
A thermal-magnetic mechanism responds to overload and short-circuit conditions, while the residual-current function monitors imbalance between conductors and trips when the applicable threshold is reached. It does not remove the need for correct earthing, circuit design or testing.
How is the PXB2Ln-63 RCBO different from an MCB or RCCB?
An MCB provides overcurrent protection but not residual-current protection. An RCCB provides residual-current protection but normally needs separate overcurrent protection. The PXB2Ln-63 combines both functions in one product, within its published ratings.
Can the PXB2Ln-63 RCBO be used as a circuit breaker?
It can provide the overcurrent and residual-current functions stated for the model, but only when 230V AC, 6A–63A, 6kA and the residual-current requirements all suit the circuit. It should not be treated as a universal replacement for every breaker.
What are the selection limitations of the PXB2Ln-63 RCBO?
The principal checks are residual-current sensitivity (30mA), residual-current or construction type (Type AC / Type A), trip curve (B / C), pole arrangement (1P+N) and short-circuit data (6kA). Board space, neutral handling, coordination and destination-market rules also have to be verified.
How should the PXB2Ln-63 RCBO be wired and tested?
Use only the diagram and terminal identification supplied for the exact ordered model. Confirm supply direction, protected neutral arrangement, conductor size, torque and isolation procedure, then perform the prescribed test-button and functional checks. Qualified personnel should complete the work under local rules.
Confirm the Right PXB2Ln-63 Configuration
Send the current rating, poles, trip curve, system voltage, expected fault level, destination market and quantity, plus residual-current sensitivity and type. CHAC will review the request against the published model range.
