Unterputz- und Aufputz-Verteilerdosen sollten als zwei separate Anfragebeschreibungen behandelt werden und nicht als allgemeine Zusage, dass eine der beiden Ausführungen für die jeweilige Einsatzstelle geeignet ist. Geben Sie die gewünschte Montageart, die baulichen Randbedingungen, das erforderliche Layout und die Abmessungen sowie die entsprechende Produktnummer an, damit der Lieferant eine präzise definierte Anfrage prüfen kann.
Inhaltsverzeichnis
Teil 1. Vergleichen Sie die Montageformen als RFQ-Eingaben.
Unterputzmontage und Aufputzmontage beschreiben, wie ein Verteilkasten soll sich auf die umgebende Baugruppe oder Wand beziehen. Keine der beiden Formulierungen allein reicht für ein Angebot aus, da der Käufer weiterhin angeben muss, was montiert werden soll, welcher Bauraum zur Verfügung steht und welche veröffentlichte Produktdokumentation zugrunde gelegt wird.
Der Vergleich sollte von der beabsichtigten Form ausgehen und nicht von der Annahme, dass ein Ansatz universell besser sei. Das hält dieses Thema von einem distribution-box versus junction-box decision, which addresses a product-category boundary rather than a mounting-form record.
| RFQ concept | Flush-mounted request | Surface-mounted request |
|---|---|---|
| Core question | What form is requested for the assembly? | What form is requested for the assembly? |
| Beweise erforderlich | Product record and assembly constraints | Product record and assembly constraints |
| Not determined by the label | Wall condition, cut-out, approval | Wall condition, fixings, approval |
| Quote response | Confirm against selected documentation | Confirm against selected documentation |
The relevant product family belongs under CHAC’s elektrische Verteileranlage range. This article narrows the task to how a buyer can state a mounting choice without treating a product image or label as a complete installation answer.
Teil 2. Benennen Sie die Baugruppenabstände vor dem Kasten.
An RFQ becomes reviewable when the mounting choice is accompanied by the conditions that make it relevant. Identify the intended assembly role, the required layout, approximate size needs, and the document that describes the surrounding equipment. These are request inputs, not a substitute for the project review.
VIOX’s distribution-box buying guidance presents product selection as a multi-input decision. The practical implication is simple: a supplier needs more than “flush” or “surface” to locate an appropriate record and respond without filling gaps with assumptions.
Use a concise condition statement. For example, “requested mounting form: ; required layout: ; assembly dimensions supplied in: ; product record requested for review: .” This wording makes the unknowns visible and keeps the quotation focused on evidence that the buyer can provide.
Teil 3. Lesen Sie den benannten Produkt-Datensatz im richtigen Geltungsbereich.
CHACs CQMG20B distribution box product page lists both flush-mounted and surface-mounted versions. It also describes a double-row layout, internal space for component arrangement, and multiple sizes.
These published fields help a buyer name what must be reviewed. They do not establish a wall condition, prescribe a recess, or demonstrate that a particular project has the necessary clearances.
Important: Treat a mounting option as a product-record field, not a site approval. VIOX’s distribution-box overview likewise places enclosure selection within a broader documented context.
| CQMG20B page statement | Appropriate RFQ use | Excluded inference |
|---|---|---|
| Flush and surface variants | State the requested form for record review | Fit for a specific wall or enclosure |
| Double-row layout | Identify layout requirement | Capacity for unspecified components |
| Multiple sizes | Ask for the selected size record | Clearance or dimensional approval |
Teil 4. Montageoption in eine überprüfbare Angebotsliste einfügen.
The buyer’s objective is not to write a long installation note. It is to give the reviewer enough information to distinguish the requested mounting form from missing project facts.
| Senden Sie mit dem Anfrageformular | Warum es wichtig ist | Controlled wording |
|---|---|---|
| Requested mounting form | Defines flush or surface record to review | “State flush-mounted or surface-mounted request” |
| Assembly role | Explains the equipment context | “Describe intended assembly function” |
| Layout and size need | Connects the request to the selected record | “Provide required layout and size information” |
| Product page / configuration | Keeps the answer traceable | “Attach CQMG20B record or selected configuration” |
| Project drawing or condition note | Identifies information outside the product page | “Provide when available for project review” |
Der distribution-board way-count RFQ article is related because capacity must often be recorded too. It does not answer the mounting-form question, so a buyer should retain both inputs instead of letting one stand in for the other.
Teil 5. Wo CQMG20B bei der Dokumentation hilft
CQMG20B offers a named page for requests that need both flush-mounted and surface-mounted options considered against a double-row distribution-box record. The CQMG20B product record can be attached to an RFQ so the reviewer knows which family and stated feature set are under discussion.
That documentation role is deliberately limited. A buyer still needs to provide the requested mounting form, layout and size need, and relevant assembly information before asking whether a configuration can be reviewed.
Where an OEM or distribution program requires further discussion, CHAC’s power-distribution customization page is the suitable next step. Bringing the selected record and the defined inputs to that discussion avoids vague comparisons.
Teil 6. Überlassen Sie die Standortgenehmigung der Projektprüfung.
A product page can show that a named series has published mounting variants. It cannot determine the condition of a wall, a recess, fastening, clearance, or the approval of a completed assembly. Those matters belong to the project documentation and responsible review.
Send the product reference and the RFQ table through the Kontaktseite von CHAC when the inputs are ready. If the buyer cannot yet state flush or surface mounting, it is better to resolve that design input first than ask for a final product conclusion.
Produktempfehlung
CQMG05 Series Garage/Workshop Distribution Box | CHAC Electric
Flush versus surface mounting is primarily a coordination decision: compare wall build-up, available recess depth, access to cable entries, service clearance, and the finished appearance required by the project. Neither mounting form is automatically suitable for every wall or enclosure condition.
Mounting coordination For a CQMG20B request, provide the intended mounting form, overall dimensions, circuit arrangement, entry direction, material, door or cover needs, quantity, and destination-market requirements. The CHAC distribution-equipment range und das box-selection guide provide useful context before the drawing review.
Distribution box mounting should be confirmed against the actual wall construction and maintenance space. A product page can describe a configuration; it cannot approve an unseen installation condition.
Für eine ähnliche Auswahlhinweise siehe What Should a Distribution Box.
Frequently Asked Questions: Distribution Box Mounting
What is the difference between flush and surface mounting?
They are different mounting descriptions for a distribution-box request. Each should be stated with the relevant assembly constraints and the product record to be reviewed.
Which mounting form should the RFQ state?
State the mounting form required by the buyer’s assembly documentation. Do not ask the product page to infer it from a photograph or an incomplete description.
What details need to accompany the mounting choice?
Include the intended assembly role, required layout, size need, named product record, and any drawing or condition note available for review.
What does the CQMG20B page list?
The named page lists flush-mounted and surface-mounted versions, a double-row layout, internal space for arrangement, and multiple sizes. Confirm the selected configuration before applying those statements to a request.
Does a mounting option approve a wall condition?
No. A mounting option describes published product availability. Site conditions and completed-assembly approval require the relevant project evidence and review.
Why record internal layout and size?
Layout and size keep the RFQ tied to the intended assembly. They help the reviewer identify the correct product record without turning a general mounting phrase into an unsupported selection claim.
