CQHS-SERIE PV-Kombinationsbox
Der CHAC CQHS PV DC-Combiner-Box Kombiniert Photovoltaik-String-Eingänge mit einem DC-Trennschalter zur Trennung auf der Gleichstromseite. Wählen Sie aus sechs Ein-/Ausgangskonfigurationen, um diese an die Anordnung Ihrer PV-Anlage anzupassen, und überprüfen Sie die Spannungs- und Stromangaben des gewählten Modells.
Produktübersicht
Der CHAC CQHS PV-Überspannungsschutzverteilerbox Es kombiniert String-Eingänge mit einem DC-Isolator, Überspannungsschutz und Sicherungskomponenten. Seine sechs zertifizierten Ein-/Ausgangskonfigurationen helfen Anwendern, die Gehäuseanordnung an den PV-Stringplan und die Wechselrichtereingänge anzupassen.
Für Importeure, Händler und Gerätehersteller kann CHAC die angeforderte Konfiguration anhand der Anforderungen des Schaltkreises und der Dokumente des Bestimmungsmarktes prüfen. Vor der Genehmigung der Muster oder einer erneuten Bestellung wird die genaue Modell-, Zeichnungs- und Kennzeichnungsvariante vereinbart.
Schlüsselpunktwahl
Typische Anwendungen
Berücksichtigen Sie CQHS für PV-Gleichstromanlagen in Wohn- oder Gewerbegebäuden, bei denen das Design einen auf Trennschaltern basierenden Sammelkasten vorsieht. Bestätigen Sie die Stranggruppierung und den Schutzgeräteplan anhand der Anforderungen des Wechselrichters, bevor Sie die Anlage freigeben.
Antragsformular und Auswahlhinweis
| Auswahlobjekt | CQHS-Konfiguration | Was zu überprüfen ist |
|---|---|---|
| Eingabe-/Ausgabe-Option | 1/1, 2/1, 3/1, 2/2, 4/2 oder 6/2 | Bestätigen Sie die Verkabelung und die MPPT-Gruppierung für das jeweilige Modell. |
| Serienbewertungen | 1000V Gleichstrom; maximaler Ausgangsstrom 32A gemäß Spezifikation | Überprüfen Sie die genaue Ausgangsleistung und die Komponentengrenzwerte; entscheiden Sie nicht allein aufgrund der Gesamtleistung des Arrays. |
| Hauptschaltgerät | CQDS-32 DC-Trennschalter | Unterscheiden Sie Isolation von der automatischen Leistungsschutzabschaltung. |
| Gehäuse | PC; IP65 / IK09; Wandmontage | Passen Sie Kabelverschraubungen, Abdichtung, Montageposition und Servicezugang an die Installation an. |
Verwenden Sie diese Prüfungen, um die Schutzfunktion, die Konfiguration und die zugehörigen CHAC-Produkte zu vergleichen, bevor Sie CQHS festlegen. Zugehörige Produkte sind Auswahlalternativen oder Systemkomponenten, keine automatischen Ersatzlösungen.
Halten Sie getrennte MPPT-Schaltkreise getrennt.
Two outputs do not automatically establish any particular internal MPPT grouping.
Confirm the component schedule for the selected box
The component information identifies the CQDS-32 isolator, CQDF-32 fuse holder and ExS-T2-DC SPD.
Review CQHD in the PV system
Die CHAC CQHD PV-Gleichstrom-Verbundleiste kombiniert Photovoltaik-String-Eingänge mit Gleichstrom-Schutzschaltern. Wählen Sie aus sechs Eingangs-/Ausgangskonfigurationen, die zu Ihrer PV-Anlagenanordnung passen, und überprüfen Sie die Spannungs- und Stromangaben des gewählten Modells.
Review CQDS-32 in the PV system
Der Photovoltaik-DC-Isolationsschalter CHAC CQDS-32 bietet die Isolierung und das unregelmäßige Schalten zwischen PV-Modulen und Wechselrichtern. Sein nicht-polares Design unterstützt ausgewählte DC-PV1-/DC-PV2-Konfigurationen mit bis zu 1200 V DC und 32 A; folgen Sie der für die ausgewählte Konfiguration angegebenen Verkabelung.
Need Help Specifying CQHS?
Senden Sie die Anforderungen an den Schaltkreis, die ausgewählte Konfiguration, den Zielmarkt und die gewünschte Stückzahl für eine modellspezifische Überprüfung.
Halten Sie getrennte MPPT-Schaltkreise getrennt.
Two outputs do not automatically establish any particular internal MPPT grouping. Provide the inverter input arrangement and string plan, then approve the exact CQHS wiring diagram. Do not combine strings that the inverter design requires to remain separate.
Confirm the component schedule for the selected box
The component information identifies the CQDS-32 isolator, CQDF-32 fuse holder and ExS-T2-DC SPD. Confirm the actual fuse links, SPD version, voltage and current limits for the ordered assembly. Component maximum ratings do not automatically become the assembled box rating.
How to Specify a CQHS Order
Verwenden Sie die unten aufgeführten Konfigurationsinformationen in der Kaufbeschreibung. Bewahren Sie die genehmigte Zeichnungsvorschau und die Produktidentifizierung bei der Bestellung auf, damit Wiederholungen der Lieferung konsistent überprüft werden können.
| Bestellinformationen | Informationen, die enthalten sein sollten |
|---|---|
| Eingabe-/Ausgabe-Option | 1/1, 2/1, 3/1, 2/2, 4/2 or 6/2 — Confirm the wiring and MPPT grouping for the exact model. |
| Serienbewertungen | 1000V DC; maximum output current 32A as specified — Check the exact output duty and component limits; do not select by total array power alone. |
| Hauptschaltgerät | CQDS-32 DC isolator — Distinguish isolation from automatic breaker protection. |
| Gehäuse | PC; IP65 / IK09; wall mounting — Match cable glands, sealing, mounting position and service access to the installation. |
| Projekt und Dokumente | Geben Sie die Anwendungsanforderungen, Installationsbedingungen und die Dokumentanforderungen für den Zielmarkt an. |
| Quantität und Identifizierung | Geben Sie die Menge an, die Anzahl der Proben, die Verpackungssprache sowie alle vorgeschlagenen Branding-Optionen an; bestätigen Sie die Machbarkeit vor der Genehmigung. |
Vor der Genehmigung die richtige Installation prüfen
Technische Daten
CQHS-1/1 PV Combiner Box
| Spezifikation | ||
| CQHS-1/1 | Schaltplan | |
| Input | 1-Saiten | ![]() |
| Ausgabe | 1-Saiten | |
| Maximale Spannung | 1000V | |
| Max DC Short Circuit Current Per Input | 16A(Changeable) | |
| Maximaler Ausgangsstrom | 32A | |
| Gehäuse | ||
| Material | PC | |
| Schutzgrad | IP65 | |
| Auswirkungen | IK09 | |
| Abmessungen | DXAT-9;L218*W200*H100mm | |
| Cable input Entry | PG09 Cable Gland,2.5-16mm2 | |
| Ausgangskabelverschraubung | PG21,2.5-16mm2 | |
| Umwelt | ||
| Betriebstemperatur | -20℃ – +60℃ | |
| Luftfeuchtigkeit | 99% | |
| Höhe | 2000M | |
| Installation | Wall Mounting | |
CQHS-2/1 PV-Verteilerbox
| Spezifikation | ||
| CQHS-2/1 | Schaltplan | |
| Input | 2 strings | ![]() |
| Ausgabe | 1-Saiten | |
| Maximale Spannung | 1000V | |
| Max DC Short Circuit Current Per Input | 16A(Changeable) | |
| Maximaler Ausgangsstrom | 32A | |
| Gehäuse | ||
| Material | PC | |
| Schutzgrad | IP65 | |
| Auswirkungen | IK09 | |
| Abmessungen | DXAT-13;L296*W230*H120mm | |
| Cable input Entry | PG09 Cable Gland,2.5-16mm2 | |
| Ausgangskabelverschraubung | PG21,2.5-16mm2 | |
| Umwelt | ||
| Betriebstemperatur | -20℃ – +60℃ | |
| Luftfeuchtigkeit | 99% | |
| Höhe | 2000M | |
| Installation | Wall Mounting | |
CQHS-2/2 PV Combiner Box
| Spezifikation | ||
| CQHS-2/2 | Schaltplan | |
| Input | 2 strings | ![]() |
| Ausgabe | 2 strings | |
| Maximale Spannung | 1000V | |
| Max DC Short Circuit Current Per Input | 16A(Changeable) | |
| Maximaler Ausgangsstrom | 32A | |
| Gehäuse | ||
| Material | PC | |
| Schutzgrad | IP65 | |
| Auswirkungen | IK09 | |
| Abmessungen | DXAT-18:L386*W230*H120mm | |
| Cable input Entry | PG09 Cable Gland,2.5-16mm2 | |
| Ausgangskabelverschraubung | PG21,2.5-16mm2 | |
| Umwelt | ||
| Betriebstemperatur | -20℃ – +60℃ | |
| Luftfeuchtigkeit | 99% | |
| Höhe | 2000M | |
| Installation | Wall Mounting | |
CQHS-4/2 PV Combiner Box
| Spezifikation | ||
| CQHS-4/2 | Schaltplan | |
| Input | 4 strings | ![]() |
| Ausgabe | 2 strings | |
| Maximale Spannung | 1000V | |
| Max DC Short Circuit Current Per Input | 16A(Changeable) | |
| Maximaler Ausgangsstrom | 32A | |
| Gehäuse | ||
| Material | PC | |
| Schutzgrad | IP65 | |
| Auswirkungen | IK09 | |
| Abmessungen | DXAT-26;L296*W390*H130mm | |
| Cable input Entry | PG09 Cable Gland,2.5-16mm2 | |
| Ausgangskabelverschraubung | PG21,2.5-16mm2 | |
| Umwelt | ||
| Betriebstemperatur | -20℃ – +60℃ | |
| Luftfeuchtigkeit | 99% | |
| Höhe | 2000M | |
| Installation | Wall Mounting | |
Warum CHAC wählen?
CHAC Electric supplies electrical protection and control products for importers, distributors and equipment brands. For CQHS, agree the configuration, technical documents, approved sample and identification requirements before production. The company facilities shown below provide company context, not a claim that every model uses the same production or test process.
01
SPEZIFIKATION BEKRÄFTIGEN
Agree the CQHS configuration, circuit duty and installation requirements.
02
DIE PAPERE ERLEICHTEN
Bestätigen Sie die Modellspezifischen Zeichnungen und die Anforderungen des Zielmarkt.
03
PROVIZIERE DIE PROBE
Notieren Sie die akzeptierten Konfigurations- und Markierungsvoraussetzungen.
04
ORDERNUMMER-CHECKE DEFINIEREN
Vereinbaren Sie die Verpackungs-, Identifikations- und Lieferbedingungen in der Preisaufforderung.

Automatisierte Montagelinie

Testlabor

Injektion und Stempeln

Qualitätskontrolle
Was können wir anpassen?
Discuss CQHS product identification, packaging and documentation with CHAC. Each proposed change is subject to technical feasibility, marking rules and approval of the exact order; no altered rating or certification is implied.
Logo & Branding
Senden Sie Ihre Logo-Grafiken und Markierungsanforderungen für Überprüfung an die verfügbare Druckfläche und die obligatorischen Produktmarkierungen.

Verpackung und Handbücher
Definition von Kartonetiketten, Verpackungssprache, Produktidentifizierung und Anweisungen für den Zielmarkt.

Konfigurationsauswahl
Specify CQHS with the required input/output choice, operating conditions and protection duty. Confirm the complete order combination.

Anforderungen für die Montage
Geben Sie die Montage- und Anschlussanforderungen zur Prüfung an. Änderungen an dem Gehäuse, den Anschlüssen oder der Bedienungsvorrichtung erfordern eine technische Genehmigung.

Marktunterlagen
Request documents covering the exact CQHS model and destination market. A standard reference alone is not evidence of certification.

Probenzulassung
Vereinbaren Sie die Musteranforderung, die Änderung des Entwurfs und die Annahmekriterien, bevor Sie eine Produktionsbestellung bestätigen.

Technische Dokumente und Support
CQHS Technical Documents
Request the CQHS datasheet, configuration drawing, installation instructions and available model-specific market documents.Anfrage-Datenblatt
Brauchen Sie technische Dokumente?
Senden Sie die Anwendung, die elektrischen Anforderungen, das Montagelayout sowie den Zielmarkt für Konfiguration und Dokumentenprüfung.Kontaktieren Sie uns
CQHS Product FAQ
How do I size a solar combiner box?
Start with the number of strings and inverter inputs, then check cold-condition open-circuit voltage, string current, protection requirements and output limits. Choose the exact CQHS input/output configuration and approve its wiring diagram.
What is the difference between CQHS and CQHD?
CQHS uses a DC isolator, while CQHD uses a DC circuit breaker as the main switching/protection element. Compare the exact box ratings and component schedule; the two series are not automatic substitutes.
Does a two-output combiner automatically support two independent MPPTs?
Not solely from the output count. Confirm the internal circuit grouping, both conductor paths and the inverter requirements using the exact assembly drawing. Avoid joining circuits intended for separate MPPT channels.
How should the PV string fuse be selected?
Check string current, reverse-current exposure, module maximum series-fuse rating and local rules. Confirm the fuse-link part number and rating in the CQHS assembly schedule. Do not select a fuse solely from the fuse holder’s maximum current.
Does the CQHS enclosure rating cover any outdoor installation?
No enclosure rating removes the need to assess exposure, temperature, cable entries, sealing and mounting. Preserve the specified IP65 construction during installation and confirm any site conditions outside the approved assembly requirements.
What information is needed to quote a CQHS box?
Provide string count and grouping, maximum PV voltage, string current, inverter model and MPPT inputs, required protection, cable details, site conditions, quantity and destination market. Agree the drawing and component schedule before production.
Specify the Right CQHS Configuration
Senden Sie CHAC Ihre erforderliche Konfiguration, Anwendung, Zielmarkt und die geschätzte Menge. Wir prüfen die angeforderten Spezifikationen und stellen Ihnen die relevanten technischen Dokumente und ein kommerzielles Angebot zur Verfügung.






















