Aislador DSL PXD6-125
El PXD6-125 is specified for safe electrical isolation and infrequent switching. Select it using the published voltage, current, pole and protection data, then confirm conductor coordination, fault conditions, enclosure requirements and local installation rules.
Descripción del producto
PXD6-125 is a 125A isolator switch for AC 230/400V applications. It is intended for control and terminal distribution assemblies requiring a visible OFF position; this describes an evaluation context, not a universal approval. Confirm the complete circuit design before specifying the product.
safe electrical isolation and infrequent switching is distinct from adjacent protection functions. Do not infer AC/DC suitability, residual-current protection, automatic control or isolation performance from the product family name alone.
Características clave
Aplicaciones típicas
control and terminal distribution assemblies requiring a visible OFF position. Verify system voltage, expected fault current or leakage, wiring arrangement, environment, coordination and applicable rules for the ordered configuration.
Guía de Solicitudes y Selección
Use the verified PXD6-125 records below to create a shortlist. Product labels do not replace the project calculation, coordination review or exact installation instructions.
| Punto de selección | PXD6-125 reference | Lo que el proyecto debe confirmar |
|---|---|---|
| Corriente nominal | Use the exact model table | Design current, conductor capacity, ambient and grouping |
| Tensión y frecuencia | AC 230/400V | Sistema de suministro y capacidad nominal de los equipos |
| Polacos | 1P / 2P / 3P / 4P | Conductors to be switched, protected or isolated |
| Protection / control | safe electrical isolation and infrequent switching | Required function and adjacent-device coordination |
| Fault / residual data | Isolation function; not an overcurrent substitute | Prospective short-circuit or leakage conditions |
Isolation vs Overcurrent Protection
An isolating switch provides a means of disconnection but is not automatically an overcurrent protective device. Coordinate it with the upstream breaker.
Safe Isolation
Review MCB Options →
Model-Specific Ratings
Use the exact technical table for rated voltage, current, poles, terminals, life and environmental limits.
Verified Data
View Technical Support →
Installation and Coordination
Check the complete circuit, conductor sizing, fault or leakage conditions, enclosure and local rules before energising.
Engineering Check
Discuss a Configuration →
Ordering Information
State model, rating, poles, system, quantity, destination market and document requirements so the configuration can be reviewed.
Project Inputs
Send Project Details →
Guía de pedidos
- State the exact model: PXD6-125.
- Provide rated current and voltage from the published technical table.
- Confirm poles and the required protection, isolation or control function.
- Provide application, expected fault/leakage conditions, destination market and quantity.
- List accessory, terminal, documentation and approved marking or packaging requirements.
Comprobaciones de Instalación y Coordinación
- Use the exact model drawing and instructions; do not infer wiring or accessory compatibility from another product.
- Verify conductor size, terminal torque, enclosure conditions, temperature, grouping and clearances.
- Coordinate upstream and downstream devices and confirm the required fault, leakage or voltage response.
- Installation, testing and maintenance must be completed by qualified personnel under applicable rules.
Designación del tipo
Dimensiones(mm)
Especificaciones técnicas
| Parámetro | |
| Rated Insulation Voltage Ui (V) | 500V |
| Rated Operational Voltage Ue (V) | 230V/400(1P), 400V(2P, 3P, 4P) |
| Rated Operational Current Ie (A) | 25A, 32A, 40A, 50A, 63A, 80A, 100A, 125A |
| Número de polos | 1P, 2P, 3P, 4P |
| Rated Short-Time Withstand Current Icw | 12Ie (t=1s) |
| Rated Short-Circuit Making Capacity Icm | 20Ie (t=0.05s) |
| Rated Impulse Withstand Voltage Uimp | (1.2 / 50μs, 2000m) 4000V |
| Rated Making and Breaking Capacity | 3Ie, 1.05Ue, cosΦ=0.65 |
| Vida Mecánica | ≥8500 |
| Electrical Life | ≥1500 |
| Estándar | IEC60947-3, GB/T 14048.3 |
| Certificación | CCC |
Requisitos del conductor y sección transversal
| Sección transversal de cobre (mm²2) | Corriente nominal In(A) |
| 6 | 32A |
| 10 | 40A |
| 10 | 50A |
| 16 | 63A |
| 25 | 80A |
| 35 | 100A |
| 50 | 125A |
¿Por qué elegir CHAC?
Con más de 30 años de experiencia en fabricación, más de 1100 empleados, más de 100 millones de postes
Con una capacidad anual y un proceso de producción automatizado 90%, CHAC ofrece una capacidad de producción estable y un estricto
control de calidad para clientes OEM/ODM globales. Nuestro sistema de fabricación interno respalda a largo plazo
Cooperación para marcas eléctricas, importadores y distribuidores.
30+
AÑOS DE EXPERIENCIA
Especializado en fabricación eléctrica de bajo voltaje
1100+
EMPLEADOS
Equipo profesional garantiza calidad y entrega estables
100M+
CAPACIDAD ANUAL DE LOS POLOS
Capacidad de producción a gran escala para satisfacer la demanda mundial
90%
PRODUCCIÓN AUTOMATIZADA
Automatización avanzada para alta eficiencia y consistencia
Línea de ensamblaje automatizada
Laboratorio de pruebas
Inyección y Estampado
Inspección de calidad
Un estricto sistema de control de calidad garantiza que cada producto cumpla con los estándares mundiales.
¿Qué podemos personalizar?
For PXD6-125 projects, CHAC can review private-label marking, packaging, approved appearance options and the published electrical configurations. Requests outside the published range require engineering evaluation, testing and feasibility review.
Logotipo y marca
Impresión de logotipos personalizados, marcado láser y soluciones de placas de identificación.
Empaquetado
Personalización
Cajas, cartones, etiquetas y manuales de color personalizados.
Eléctrico
Personalización
Corriente, voltaje, poder de interrupción, curva de disparo y otros
funciones especiales.
Producto
Apariencia
Color de la carcasa, color de las manijas y personalización de la apariencia.
Certificación
Apoyo
Los productos cumplen con los estándares internacionales y el mercado
requisitos.
Ingeniería
Desarrollo
Evaluación de planos, prueba de prototipos y producción en masa.
Descargar
Interruptor automático miniatura serie PXB6
Descripción general completa de componentes eléctricos de bajo voltaje y referencia para la selección de productos.
¿Necesita documentos técnicos?
Contáctenos para obtener hojas de datos, certificados, planos, orientación de selección o soporte para proyectos OEM/ODM.
PXD6-125 Product FAQ
What is the PXD6-125 used for?
The PXD6-125 is specified for safe electrical isolation and infrequent switching in AC 230/400V applications, within the ratings and configurations listed in its technical table. Final suitability depends on the complete circuit design.
Does the PXD6-125 provide overload protection?
No overcurrent claim is added for this isolating switch. It provides the documented isolation and switching function; coordinate it with the appropriate upstream protective device.
How do I choose the PXD6-125 rating and poles?
Start with the design current and system arrangement, then choose only a published option. The page lists pole options as 1P / 2P / 3P / 4P; confirm neutral, polarity, conductors and isolation requirements.
What safety limitation applies to the PXD6-125?
Do not treat the PXD6-125 as a universal substitute for another device. Confirm Isolation function; not an overcurrent substitute, the system voltage, fault or leakage conditions and any separate upstream protection before selection.
Can the PXD6-125 be used in another circuit type?
Only when the exact ordered configuration is rated for that circuit. AC and DC duties, residual-current devices, isolators, smart controls and voltage protectors are not interchangeable by appearance or current rating.
How should the PXD6-125 be installed and tested?
Use the exact product drawing, terminal identification and instructions. A qualified person should verify isolation, conductors, torque, settings, coordination and functional tests before energising the circuit.
Confirm the Right PXD6-125 Configuration
Send the model, rating, poles, system voltage, application, quantity and document requirements. CHAC will review the request against the published data.
