CQBD-63 Disjoncteur de faible intensité
Le disjoncteur CC CHAC CQBD-63 offre une protection contre les surcharges et les courts-circuits, avec une conception non polarisée et un indicateur de position des contacts. Les versions de un à quatre pôles couvrent des tensions continues allant de 300V à 1200V ; adaptez la disposition des pôles et la caractéristique de déclenchement au circuit.
Vue d'ensemble du produit
Le CHAC CQBD-63 disjoncteur CC non polarisé Il combine la protection contre les surcharges et les courts-circuits avec un indicateur de position des contacts. Les configurations de un à quatre pôles couvrent différentes tensions continues, ce qui fait de la disposition des pôles une partie intégrante de la spécification électrique plutôt qu’un simple choix lié à l’espace disponible.
Pour les importateurs, les distributeurs et les fabricants d’équipements, CHAC peut vérifier la configuration demandée au regard des exigences du circuit électrique et des documents propres au marché de destination. Convenez du modèle exact, des schémas et des exigences de marquage avant l’approbation des échantillons ou la passation d’une commande répétée.
Points clés de sélection
Applications typiques
Envisagez CQBD-63 pour la distribution en courant continu et les assemblages photovoltaïques lorsque la tension sélectionnée, le courant de court-circuit assigné et caractéristique du voyage respecter la conception du projet. La construction non polarisée ne dispense pas de suivre le schéma de câblage type.
Demandes d’admission et guide de sélection
| Article sélectionné | Configuration CQBD-63 | Qu'est-ce que l'on doit vérifier ? |
|---|---|---|
| Pôles et tension de fonctionnement | 1P 300V; 2P 600V; 3P 900V; 4P 1200V DC | Select the pole arrangement and approved connection together. |
| Courant nominal | 1–63A in the listed steps | Coordinate the selected rating with design current, cable ampacity and environmental conditions. |
| Short-circuit ratings | Technical-table configuration: Icu 10kA; Ics 7.5kA | Confirm the ordered breaking-capacity version; other variants must have their own verified ratings. |
| Caractéristiques du voyage | B: 4–7In; C: 8In ±20%; D: 12In ±20% | Use these model-specific DC thresholds, not generic AC MCB curve values. |
Use these checks to compare the protection function, configuration and related CHAC products before specifying CQBD-63. Related products are selection alternatives or system components, not automatic replacements.
Keep the voltage-to-pole relationship in the purchase order
The CQBD-63 voltage rating rises with the documented pole arrangement.
Use the CQBD-63 curve data for protection checks
The B/C/D letters on this DC model do not carry the same numerical thresholds as a typical AC MCB.
Compare PXB6DC-63M for the required function
The CHAC PXB6DC-63M DC miniature circuit breaker offers overcurrent protection across a 0.5–63A rated-current range. Available in one to four poles, its voltage rating rises from 125V DC for 1P to 500V DC for 4P; use the specified pole arrangement and model-specific tripping characteristics.
Compare CQHD for the required function
The CHAC CQHD PV DC combiner box combines photovoltaic string inputs with DC circuit-breaker protection. Choose from six input/output configurations to match your PV array layout, and confirm the voltage and current ratings for the selected model.
Need Help Specifying CQBD-63?
Send the circuit requirements, selected configuration, destination market and quantity for a model-specific review.
Keep the voltage-to-pole relationship in the purchase order
The CQBD-63 voltage rating rises with the documented pole arrangement. State both the required DC voltage and number of poles when requesting a quotation, and obtain the corresponding connection diagram before panel layout approval.
Use the CQBD-63 curve data for protection checks
The B/C/D letters on this DC model do not carry the same numerical thresholds as a typical AC MCB. Check the published characteristic against load inrush and the minimum fault current, then confirm the ordered current and breaking-capacity variant.
How to Specify a CQBD-63 Order
Use the configuration details below in the purchase specification. Keep the approved drawing revision and product identification with the order so repeat deliveries can be checked consistently.
| Order detail | Information to include |
|---|---|
| Pôles et tension de fonctionnement | 1P 300V; 2P 600V; 3P 900V; 4P 1200V DC — Select the pole arrangement and approved connection together. |
| Courant nominal | 1–63A in the listed steps — Coordinate the selected rating with design current, cable ampacity and environmental conditions. |
| Short-circuit ratings | Technical-table configuration: Icu 10kA; Ics 7.5kA — Confirm the ordered breaking-capacity version; other variants must have their own verified ratings. |
| Caractéristiques du voyage | B: 4–7In; C: 8In ±20%; D: 12In ±20% — Use these model-specific DC thresholds, not generic AC MCB curve values. |
| Project and documents | Supply the application, installation conditions and destination-market document requirements. |
| Quantity and identification | State the quantity, sample requirement, packaging language and any proposed branding; confirm feasibility before approval. |
Check Installation Fit Before Approval
Product description
| Project | Paramètre |
| Rated Shell Current | 63A |
| Meet The Standard | GB/T 14048.2,IEC 60947-2 |
| Rated Insulation Voltage Ui | 1200V |
| Rated Impulse Withstand Voltage Uimp | 6kV |
| Rated Current | 1A,2A,3A,4A,6A,10A,16A,20A,25A,32A,40A,50A,63A |
| Rated Voltage | DC300V(1P),600V(2P),900V(3P),1200V(4P) |
| Release Curve | B(4In-7In),C:8In±20%,D:12In±20% |
| Polar Number | 1P,2P,3P,4P |
| Unipolar Width | 18mm |
| Ultimate Short-circuit Breaking Capacity Icu | 10kA |
| Operating Short-circuit Breaking Capacity Ics | 7.5kA |
| Reference Temperature | 30℃ |
| Usage Category | A |
| Vie mécanique | 20000 times |
| Durée de vie électrique | More than 1500 times |
| Protection Level | IP20 |
| Wiring Capacity (mm2) | 16 |
| Wiring Method | Both up and down incoming lines are acceptable |
Product release characteristics
| Rated current (A) | Overload tripping characteristic | Instantaneous release characteristic (A) | |
| 1.05ln agreed non trip time H (cold state) | 1.30ln agreed release time H (hot state) | ||
| ln ≤ 63 | 1 | 1 | B(4ln-7ln) C:8ln±20%,D:12ln±20% |
Model meaning
Time-current characteristics
Product appearance and installation dimensions
Pourquoi choisir CHAC
CHAC Electric supplies electrical protection and control products for importers, distributors and equipment brands. For CQBD-63, agree the configuration, technical documents, approved sample and identification requirements before production. The company facilities shown below provide company context, not a claim that every model uses the same production or test process.
01
CONFIRM THE SPECIFICATION
Agree the CQBD-63 configuration, circuit duty and installation requirements.
02
REVIEW THE DOCUMENTS
Confirm model-specific drawings and destination-market requirements.
03
APPROVE THE SAMPLE
Record the accepted configuration and marking requirements.
04
DEFINE ORDER CHECKS
Agree packaging, identification and delivery requirements in the quotation.
Ligne de montage automatisée
Laboratoire d'essai
Injection et estampage
Inspection de qualité
Qu'est-ce que nous pouvons personnaliser ?
Discuss CQBD-63 product identification, packaging and documentation with CHAC. Each proposed change is subject to technical feasibility, marking rules and approval of the exact order; no altered rating or certification is implied.
Logo et identité visuelle
Submit logo artwork and marking requirements for review against the available print area and mandatory product markings.
Packaging & Manuals
Define carton labels, packaging language, product identification and instruction requirements for the destination market.
Configuration Selection
Specify CQBD-63 with the required poles and operating voltage, operating conditions and protection duty. Confirm the complete order combination.
Assembly Requirements
Provide the mounting and connection requirements for review. Changes to the housing, terminals or operating arrangement require engineering approval.
Market Documentation
Request documents covering the exact CQBD-63 model and destination market. A standard reference alone is not evidence of certification.
Sample Approval
Agree the sample specification, drawing revision and acceptance criteria before confirming a production order.
Technical Documents and Support
CQBD-63 Technical Documents
Request the CQBD-63 datasheet, configuration drawing, installation instructions and available model-specific market documents.Request Datasheet
Dois-je avoir des documents techniques ?
Send the application, electrical requirements, assembly layout and destination market for configuration and document review.Contactez-nous
CQBD-63 Product FAQ
Does polarity matter on a DC circuit breaker?
It depends on the breaker design. CQBD-63 is specified as non-polar, but its voltage, pole arrangement and wiring instructions still apply. Do not transfer this characteristic to another DC model without confirmation.
Can a one-pole CQBD-63 be used at 1200V DC?
No. The table assigns 300V DC to 1P and 1200V DC to 4P, with 600V for 2P and 900V for 3P. Use the approved arrangement and wiring for the required voltage.
Are its B, C and D curves the same as AC MCB curves?
No such equivalence should be assumed. CQBD-63 specifies B at 4–7In, C at 8In ±20% and D at 12In ±20%. Use the actual characteristic for protection coordination.
How do I choose the CQBD-63 current rating?
Use circuit design current and conductor ampacity, then check inrush, ambient conditions and the fault-disconnection requirement. Do not increase current rating simply to stop a recurring trip without investigating its cause.
What is the difference between Icu and Ics?
Icu and Ics describe ultimate and service short-circuit interruption duties under stated test conditions. Use the CQBD-63 values for the selected voltage and configuration, and compare them with the prospective fault current.
What should I include in a CQBD-63 purchase specification?
Specify DC operating voltage, poles, rated current, the exact trip characteristic and required fault capacity. Include wiring requirements, load type, destination-market documentation, quantity and any branding request.
Specify the Right CQBD-63 Configuration
Send CHAC your required configuration, application, destination market and estimated quantity. We will review the requested specification and provide the relevant technical documents and commercial proposal.
