CQMG10 Series Plug-In Distribution Box
Itu CQMG10 Series Plug-In Distribution Box CHAC adalah kotak distribusi untuk distribusi dan penutupan sirkuit terorganisir. Halaman ini menyertakan tabel teknis spesifik model serta gambar produk asli agar pembeli dapat memverifikasi tegangan, arus, konfigurasi, pemasangan, dan standar yang berlaku sebelum melakukan pemesanan. Kesesuaian akhir tergantung pada rangkaian lengkap, metode pemasangan, dan peraturan pasar tujuan.
Gambaran Produk
CQMG10 Series Plug-In Distribution Box is a distribution box intended for organized circuit distribution and termination. The current product record identifies it for residential, commercial and light-industrial panels. Use the exact model variant and preserved technical source as the basis for procurement rather than assuming that every family member has the same rating.
Verified source summary: Type Designation Technical Specifications Parameter Description Mounting Type Surface Mount Material Box: Cold-rolled steel Cover: PC material Plate Thickness 1.0 mm Circuit Breaker Type Plug-in Protection Rating IP20 (for mounting holes) IP40 (for other parts, before knockout removal) Surface Treatment Electrostatic spraying Dimensions(mm) Circuit Configuration Box Dimensions (LWD, mm) Neutral Bar Terminal Holes Gro
Fitur Utama
Aplikasi Biasa
Typical use can include residential, commercial and light-industrial panels when the project confirms system voltage, current, fault or surge exposure, conductor and enclosure requirements, and the selected variant’s installation instructions. This page does not replace the project design or the authority having jurisdiction.
Permohonan dan Panduan Pemilihan
Use the following decision points with the preserved model data. Product-family descriptions explain intent, but the exact technical table controls the ordered variant.
| Titik pemilihan | CQMG10 Series Plug-In Distribution Box | Hal yang harus dipastikan oleh proyek tersebut |
|---|---|---|
| Aplikasi | Distribution Box projects | Confirm the actual system and environment |
| Selection basis | distribusi dan penutupan rangkaian yang terorganisir | Use the exact model and technical table |
| Pemasangan | Follow the model instructions | Check mounting, clearances and termination |
| Kepatuhan | Use the listed standard where applicable | Verify edition, scope and destination rules |
| Adjacent product | Evaluate the related CHAC family where function differs | Do not substitute without engineering review |
Function
distribusi dan penutupan rangkaian yang terorganisir
Match the protection or switching function to the system.
Konfigurasi
Model-specific options
Confirm current, voltage, poles, terminals or accessories from the table.
Pemasangan
Mechanical and electrical fit
Check enclosure, mounting, wiring space and maintenance access.
Project evidence
Documents and test records
Retain the approved drawing, technical sheet and commissioning record.
Panduan Pemesanan
- State the exact model and variant.
- Provide the system voltage, current, frequency and load or protection function.
- Confirm mounting, terminals, accessories, enclosure and environmental conditions.
- Share quantity, destination market and required technical documents.
Pengujian Instalasi dan Koordinasi
- Verify the model’s ratings and connection arrangement against the project drawings.
- Check conductor, busbar, enclosure, clearances and tightening requirements using the product documentation.
- Coordinate upstream and downstream protection or control devices where applicable.
- Use qualified personnel for installation, testing, isolation and maintenance.
Type Designation
Spesifikasi Teknis
| Parameter | Description |
| Mounting Type | Surface Mount |
| Material | Box: Cold-rolled steel Cover: PC material |
| Plate Thickness | 1.0 mm |
| Circuit Breaker Type | Plug-in |
| Protection Rating | IP20 (for mounting holes) IP40 (for other parts, before knockout removal) |
| Surface Treatment | Electrostatic spraying |
Dimensi (mm)
| Circuit Configuration | Box Dimensions (LWD, mm) | Neutral Bar Terminal Holes | Ground Bar Terminal Holes | Knockouts |
| Main Switch (2P) + 4 Circuits | 249 * 209 * 105 | 4 | 7 | Top: Φ32×2 + Φ25×2 Bottom: Φ32×2 + Φ25×2 |
| Main Switch (2P) + 6 Circuits | 249 * 208 * 105 | 6 | 9 | Top: Φ32×2 + Φ25×2 Bottom: Φ32×2 + Φ25×2 |
| Main Switch (2P) + 10 Circuits | 326 * 209 * 105 | 10 | 13 | Top: Φ32×2 + Φ25×2 Bottom: Φ32×2 + Φ25×2 |
| Main Switch (2P) + 12 Circuits | 364 * 209 * 105 | 12 | 15 | Top: Φ32×2 + Φ25×2 Bottom: Φ32×2 + Φ25×5 |
Mengapa Memilih CHAC
Dengan pengalaman manufaktur lebih dari 30 tahun, 1100+ karyawan, dan 100M+ tiang
kapasitas tahunan dan produksi otomatis 90% unit, CHAC memberikan kapasitas produksi yang stabil dan ketat
Pengendalian kualitas untuk pelanggan OEM/ODM global. Sistem manufaktur internal kami mendukung jangka panjang
Kerjasama untuk merek-merek listrik, importir dan distributor.
30+
BERKALI-KALI BERKEMBANG
Mengkhususkan diri dalam manufaktur listrik tegangan rendah
1100+
KARYAWAN
Tim profesional memastikan kualitas dan pengiriman yang stabil
100 juta+
Kapasitas Bulanan POKER
Kapasitas produksi berskala besar untuk memenuhi permintaan global
90%
PENGELOLAAN PRODUKSI AUTOMATIS
Otomasi canggih untuk efisiensi dan konsistensi yang tinggi
Barisan Perakitan Otomatis
Laboratorium Pengujian
Injeksi & Stamping
Pemeriksaan Kualitas
Sistem kontrol kualitas yang ketat memastikan setiap produk memenuhi standar global.
Apa yang Dapat Kami Sesuaikan?
Flexible customization services are available for enclosure dimensions, component configuration,
branding and project requirements.
Penutup
Desain
Ukuran, struktur, dan detail pemasangan kandang yang disesuaikan.
Dalaman
Konfigurasi
Fleksibilitas tata letak internal dan pilihan susunan komponen.
Branding &
Logo
Logo label pribadi, papan nama, dan identifikasi merek.
Kemasan
Desain
Peralatan karton, label, manual, dan solusi kemasan khusus.
Elektrik
Konfigurasi
Pemasangan listrik yang disesuaikan berdasarkan kebutuhan aplikasi.
Sertifikasi
Dukungan
Penyiapan dukungan terhadap standar pasar sasaran dan persyaratan kepatuhan.
Unduh
Produk Lainnya
Complete product overview for low-voltage electrical components and product selection reference.
Butuh Dokumen Teknis?
Hubungi kami untuk mendapatkan data spesifikasi, sertifikat, gambar, panduan pemilihan, atau dukungan proyek OEM/ODM.
CQMG10 Product FAQ
What is the CQMG10 distribution box for?
It organizes and protects outgoing circuits in the application context shown by the product record. Confirm capacity, mounting and enclosure requirements.
How do I choose the box size?
Count modules or circuits, allow wiring and heat-dissipation space, and check the exact dimensions, cover and mounting method for the selected model.
Surface or flush mounting?
Use the mounting option published for the series and verify wall depth, fixing points and maintenance access.
Can it combine power and data?
Some distribution-box variants include dedicated power and weak-current or data arrangements. Confirm the exact model layout before ordering.
What protection rating applies?
Use the rating stated for the exact enclosure and installation condition. Knockout removal, cover fit and cable entries can change the effective protection.
What should be included in an order?
Provide model, size or module count, mounting type, color, quantity, destination market and required drawings or packaging details.
Confirm the Right CQMG10 Configuration
Send the exact model, operating conditions, quantity, destination market and required documents. CHAC will review the request against the published product data.
