PXB6L-63B Pemutus Sirkuit Listrik Sisa Beroperasi dengan Elektromagnet
RCBO elektromagnetik CHAC PXB6L-63B menggabungkan perlindungan beban lebih dan arus pendek dengan perlindungan arus sisa Tipe B. Rentang 6–63A-nya mencakup empat susunan kutub dan kurva tripping B/C/D, memungkinkan konfigurasi yang teratur untuk sesuai dengan persyaratan rangkaian dan arus sisa.
Gambaran Produk
CHAC PXB6L-63B Tipe B RCBO elektromagnetik menggabungkan deteksi arus bocor dengan proteksi terhadap beban lebih dan hubungan singkat. Bagi para distributor dan pembuat panel, rincian pesanan yang penting adalah jenis kebocoran, sensitivitas, kurva arus lebih, dan susunan tiang—bukan hanya sufiks model semata.
Bagi para importir, distributor, dan produsen peralatan, CHAC dapat meninjau konfigurasi yang diminta sesuai dengan persyaratan sirkuit serta dokumen pasar tujuan. Pastikan kesepakatan mengenai model yang tepat, gambar teknis, dan persyaratan penandaan sebelum persetujuan sampel atau pemesanan ulang.
Poin-Poin Pilihan Utama
Aplikasi Biasa
Evaluate PXB6L-63B for AC installations whose equipment and protection design require Jenis B detection. Confirm supply conditions and test requirements for the exact electromagnetic configuration; do not infer operation under every supply-loss condition from the mechanism name.
Permohonan dan Panduan Pemilihan
| Item seleksi | PXB6L-63B configuration | Hal yang harus diverifikasi |
|---|---|---|
| Mechanism and leakage type | Electromagnetic; Type B | Distinguish the operating mechanism from waveform detection and overcurrent curve. |
| Arus pengenal | 6–63A | Choose the actual current step for the circuit. |
| Pole arrangements | 1P+N, 2P, 3P+N or 4P | The voltage row states 230V for 1P+N and 400V for 3P+N; confirm other pole/voltage combinations before ordering. |
| Sensitivity and curve | 30/50/100/300mA; B/C/D | Specify each field independently; listed service breaking capacity is 6000A. |
Use these checks to compare the protection function, configuration and related CHAC products before specifying PXB6L-63B. Related products are selection alternatives or system components, not automatic replacements.
Confirm the complete electromagnetic configuration
The mechanism description does not replace the installation instructions.
Avoid ambiguous Type B purchase descriptions
An order that says only B type leaves uncertainty about whether the buyer means leakage detection or the overcurrent curve.
Compare PXB6LE-63B for the required function
CHAC PXB6LE-63B electronic RCBO menggabungkan perlindungan overload dan short-circuit dengan perlindungan arus sisa Type B. Tersedia dalam rating 6–63A dan konfigurasi empat kutub, produk ini menawarkan kurva B/C/D serta sensitivitas arus sisa dari 30mA hingga 300mA.
Compare PXL6-100B for the required function
The CHAC PXL6-100B electromagnetic RCCB provides Type B residual-current protection for AC circuits, with rated currents from 10A to 100A. Select the sensitivity and pole arrangement for the circuit, and coordinate separate overcurrent protection with the published conditional short-circuit rating.
Need Help Specifying PXB6L-63B?
Send the circuit requirements, selected configuration, destination market and quantity for a model-specific review.
Confirm the complete electromagnetic configuration
The mechanism description does not replace the installation instructions. Request the exact wiring and test procedure, supply-condition requirements and applicable model documents, particularly when replacing an electronic RCBO.
Avoid ambiguous Type B purchase descriptions
An order that says only B type leaves uncertainty about whether the buyer means leakage detection or the overcurrent curve. Write Type B residual-current detection and the requested B/C/D curve as separate entries, followed by current, poles and mA sensitivity.
How to Specify a PXB6L-63B Order
Use the configuration details below in the purchase specification. Keep the approved drawing revision and product identification with the order so repeat deliveries can be checked consistently.
| Rincian pesanan | Information to include |
|---|---|
| Mechanism and leakage type | Electromagnetic; Type B — Distinguish the operating mechanism from waveform detection and overcurrent curve. |
| Arus pengenal | 6–63A — Choose the actual current step for the circuit. |
| Pole arrangements | 1P+N, 2P, 3P+N or 4P — The voltage row states 230V for 1P+N and 400V for 3P+N; confirm other pole/voltage combinations before ordering. |
| Sensitivity and curve | 30/50/100/300mA; B/C/D — Specify each field independently; listed service breaking capacity is 6000A. |
| Project and documents | Supply the application, installation conditions and destination-market document requirements. |
| Quantity and identification | State the quantity, sample requirement, packaging language and any proposed branding; confirm feasibility before approval. |
Check Installation Fit Before Approval
Spesifikasi Teknis
| Parameter | |
| Tegangan Terukur (V) | 230V~(1P+N)/400V~(3P+N) |
| Arus Pengenal (A) | 6、10、16、20、25、32、40、50、63 |
| Jumlah Tiang | 1P+N, 2P, 3P+N, 4P |
| Rated Short-Circuit Breaking Capacity Ics(A) | 6000A |
| Rated Residual Operating Current IΔn(mA) | 30、50、100、300 |
| Rated Residual Non-Operating Current ΔIΔno(mA) | 0.5IΔn |
| Rated Residual Make and Break Capacity IΔm(A) | 3000A |
| Residual Current Tripping Threshold | ≤0.3s |
| Residual Current Trip Type | B Type |
| Ketahanan Mekanis | ≥6000 |
| Daya Tahan Listrik | ≥4000 |
| Kurva tripping | B, C, D |
| Pollution Degree | 2 |
| Protection Class | IP 20 |
| Installation Category | Ⅲ |
| Standar | IEC61009-1, GB/T16917.1, IEC62423, GB/T22794 |
| Sertifikasi | CE CB CCC|DEKRA Certified |
Karakteristik Tripping (Suhu Referensi: 30℃)
| Item | Kurva Tripping | Arus Uji (A) | Status Awal | Batas waktu untuk tripping atau tidak tripping | Hasil yang diharapkan | Komentar |
| Delay | ≤63 | Dingin | 1.13In | ≤1h | Tidak tersandung | |
| Delay | ≤63 | Following previous test | 1.45In | ＜1h | Tersandung | Current smoothly rises to specified value in 5s |
| Delay | ≤32 | Dingin | 2.55In | 1＜t＜60s | Tersandung | |
| Delay | >32 | Dingin | 2.55In | 1＜t＜120s | Tersandung | |
| Instantaneous | Any value | Dingin | 3、5、10In | ≤0.1s | Tidak tersandung | B, C, D |
| Instantaneous | Any value | Dingin | 5、10、20In | ＜0.1s | Tersandung | B, C, D |
Catatan: Istilah “dingin” berarti pengujian dilakukan pada suhu kalibrasi referensi tanpa beban sebelum pengujian.
Persyaratan konduktor dan bagian penampang
| Copper cross-section(mm²) | Rated current In(A) |
| 1 | In≤6 |
| 1.5 | 6＜In≤13 |
| 2.5 | 13＜In≤20 |
| 4 | 20＜In≤25 |
| 6 | 25＜In≤32 |
| 10 | 32＜In≤50 |
| 16 | 50＜In≤63 |
Penamaan tipe
Kurva tripping
Dimensi (mm)
Mengapa Memilih CHAC
CHAC Electric supplies electrical protection and control products for importers, distributors and equipment brands. For PXB6L-63B, agree the configuration, technical documents, approved sample and identification requirements before production. The company facilities shown below provide company context, not a claim that every model uses the same production or test process.
01
KONFIRMASI SPESIFIKASI
Agree the PXB6L-63B configuration, circuit duty and installation requirements.
02
TINJAU DOKUMEN-DOKUMEN
Konfirmasikan gambar yang spesifik untuk model dan persyaratan pasar tujuan.
03
SETUJUI SAMPEL
Catat konfigurasi yang diterima dan persyaratan penandaan.
04
TENTUKAN CEK PESANAN
Setujui persyaratan pengemasan, identifikasi, dan pengiriman dalam penawaran.
Barisan Perakitan Otomatis
Laboratorium Pengujian
Injeksi & Stamping
Pemeriksaan Kualitas
Apa yang Dapat Kami Sesuaikan?
Discuss PXB6L-63B product identification, packaging and documentation with CHAC. Each proposed change is subject to technical feasibility, marking rules and approval of the exact order; no altered rating or certification is implied.
Logo & Branding
Kirimkan karya seni logo dan persyaratan penandaan untuk ditinjau sesuai dengan area cetak yang tersedia serta penandaan produk wajib.
Kemasan & Manual
Tentukan label karton, bahasa pada kemasan, identifikasi produk, serta persyaratan instruksi untuk pasar tujuan.
Pemilihan Konfigurasi
Specify PXB6L-63B with the required mechanism and leakage type, operating conditions and protection duty. Confirm the complete order combination.
Assembly Requirements
Provide the mounting and connection requirements for review. Changes to the housing, terminals or operating arrangement require engineering approval.
Dokumentasi Pasar
Request documents covering the exact PXB6L-63B model and destination market. A standard reference alone is not evidence of certification.
Persetujuan Sampel
Setujui spesifikasi sampel, revisi gambar, dan kriteria penerimaan sebelum memastikan pesanan produksi.
Dokumen Teknis dan Dukungan
PXB6L-63B Technical Documents
Request the PXB6L-63B datasheet, configuration drawing, installation instructions and available model-specific market documents.Minta Lembar Data
Butuh Dokumen Teknis?
Send the application, electrical requirements, assembly layout and destination market for configuration and document review.Hubungi Kami
PXB6L-63B Product FAQ
What is the difference between electronic and electromagnetic RCBOs?
The terms describe different operating mechanisms, not the leakage waveform type. PXB6L-63B is the electromagnetic Type B model. Confirm the wiring, supply-condition behavior and test instructions for the exact device instead of assuming every electromagnetic or electronic design behaves identically.
Does Type B mean the breaker is for a DC supply?
No. Type B describes residual-current detection, including specified DC components; it does not establish a DC operating-voltage rating. PXB6L-63B is selected using its documented AC voltage and pole configuration.
Which sensitivity options are listed for PXB6L-63B?
The listed values are 30, 50, 100 and 300mA. Select the sensitivity required by the circuit and local rules and specify it separately from the 6–63A current rating.
How should I choose the PXB6L-63B residual-current sensitivity?
Select the mA rating from the circuit purpose, equipment instructions and local requirements. Rated current in amperes is a separate specification. Confirm the exact PXB6L-63B sensitivity variant and its operating-time data rather than using a larger threshold to mask recurring trips.
Why can a PXB6L-63B installation trip repeatedly?
Possible causes include insulation faults, accumulated equipment leakage, incorrect neutral connections or an unsuitable protection type. Have a qualified person investigate the circuit and follow the device test instructions before changing the rating or replacing protection.
What should an importer include in a PXB6L-63B inquiry?
Specify poles, AC supply, rated current, residual-current type and sensitivity, plus the overcurrent curve if ordering an RCBO. Add the destination market, required documents, quantity and marking requirements so the quotation identifies the exact configuration.
Specify the Right PXB6L-63B Configuration
Send CHAC your required configuration, application, destination market and estimated quantity. We will review the requested specification and provide the relevant technical documents and commercial proposal.
