PXB6L-63B Disjoncteur à courant résiduel électromagnétique
Le disjoncteur différentiel électromagnétique CHAC PXB6L-63B combine la protection contre les surcharges et les courts-circuits avec la protection différentielle de type B. Sa gamme 6–63A comprend quatre configurations polaires et des courbes de déclenchement B/C/D, permettant d’obtenir une configuration adaptée aux exigences du circuit et de la protection différentielle.
Vue d'ensemble du produit
Le CHAC PXB6L-63B Disjoncteur différentiel électromagnétique de type B Il combine la détection de courant résiduel avec la protection contre les surcharges et les courts-circuits. Pour les distributeurs et les constructeurs de tableaux électriques, les informations de commande essentielles sont le type de déclenchement à la fuite, la sensibilité, la courbe de caractéristique d’intensité et la disposition des pôles, et non pas uniquement le suffixe du modèle.
Pour les importateurs, les distributeurs et les fabricants d’équipements, CHAC peut vérifier la configuration demandée au regard des exigences du circuit électrique et des documents propres au marché de destination. Convenez du modèle exact, des schémas et des exigences de marquage avant l’approbation des échantillons ou la passation d’une commande répétée.
Points clés de sélection
Applications typiques
Evaluate PXB6L-63B for AC installations whose equipment and protection design require Type B detection. Confirm supply conditions and test requirements for the exact electromagnetic configuration; do not infer operation under every supply-loss condition from the mechanism name.
Demandes d’admission et guide de sélection
| Article sélectionné | PXB6L-63B configuration | Qu'est-ce que l'on doit vérifier ? |
|---|---|---|
| Mechanism and leakage type | Electromagnetic; Type B | Distinguish the operating mechanism from waveform detection and overcurrent curve. |
| Courant nominal | 6–63A | Choose the actual current step for the circuit. |
| Pole arrangements | 1P+N, 2P, 3P+N or 4P | The voltage row states 230V for 1P+N and 400V for 3P+N; confirm other pole/voltage combinations before ordering. |
| Sensitivity and curve | 30/50/100/300mA; B/C/D | Specify each field independently; listed service breaking capacity is 6000A. |
Use these checks to compare the protection function, configuration and related CHAC products before specifying PXB6L-63B. Related products are selection alternatives or system components, not automatic replacements.
Confirm the complete electromagnetic configuration
The mechanism description does not replace the installation instructions.
Avoid ambiguous Type B purchase descriptions
An order that says only B type leaves uncertainty about whether the buyer means leakage detection or the overcurrent curve.
Compare PXB6LE-63B for the required function
Le CHAC PXB6LE-63B est un disjoncteur électronique à protection contre les surcharges et les courts-circuits, doté d’une protection contre les courants résiduels de type B. Disponible en versions de 6 à 63 A et avec quatre configurations de broches, il propose des courbes B/C/D ainsi qu’une sensibilité au courant résiduel allant de 30 mA à 300 mA.
Compare PXL6-100B for the required function
The CHAC PXL6-100B electromagnetic RCCB provides Type B residual-current protection for AC circuits, with rated currents from 10A to 100A. Select the sensitivity and pole arrangement for the circuit, and coordinate separate overcurrent protection with the published conditional short-circuit rating.
Need Help Specifying PXB6L-63B?
Veuillez transmettre les spécifications du circuit, la configuration sélectionnée, le marché cible et la quantité souhaitée afin d’effectuer une analyse spécifique au modèle.
Confirm the complete electromagnetic configuration
The mechanism description does not replace the installation instructions. Request the exact wiring and test procedure, supply-condition requirements and applicable model documents, particularly when replacing an electronic RCBO.
Avoid ambiguous Type B purchase descriptions
An order that says only B type leaves uncertainty about whether the buyer means leakage detection or the overcurrent curve. Write Type B residual-current detection and the requested B/C/D curve as separate entries, followed by current, poles and mA sensitivity.
How to Specify a PXB6L-63B Order
Utilisez les détails de configuration ci-dessous dans la spécification d’achat. Conservez la révision approuvée du dessin et l’identification du produit avec la commande afin que les livraisons ultérieures puissent être contrôlées de manière cohérente.
| Détail de la commande | Informations à inclure |
|---|---|
| Mechanism and leakage type | Electromagnetic; Type B — Distinguish the operating mechanism from waveform detection and overcurrent curve. |
| Courant nominal | 6–63A — Choose the actual current step for the circuit. |
| Pole arrangements | 1P+N, 2P, 3P+N or 4P — The voltage row states 230V for 1P+N and 400V for 3P+N; confirm other pole/voltage combinations before ordering. |
| Sensitivity and curve | 30/50/100/300mA; B/C/D — Specify each field independently; listed service breaking capacity is 6000A. |
| Projet et documents | Fournissez les exigences documentaires relatives à l’application, aux conditions d’installation et au marché de destination. |
| Quantité et identification | Précisez la quantité, les exigences relatives aux échantillons, la langue d’emballage et toute proposition de marque ; confirmez la faisabilité avant approbation. |
Vérifiez l’ajustement de l’installation avant approbation
Caractéristiques techniques
| Paramètre | |
| Tension nominale (V) | 230V~(1P+N)/400V~(3P+N) |
| Courant nominal (A) | 6, 10, 16, 20, 25, 32, 40, 50, 63 |
| Nombre de Polonais | 1P+N, 2P, 3P+N, 4P |
| Capacité nominale de coupure en court-circuit Ics (A) | 6000A |
| Courant résiduel assigné de fonctionnement IΔn (mA) | 30, 50, 100, 300 |
| Courant résiduel assigné de non-fonctionnement ΔIΔno (mA) | 0.5IΔn |
| Capacité nominale de fermeture et de rupture résiduelle IΔm (A) | 3000A |
| Residual Current Tripping Threshold | ≤0.3s |
| Type de déclenchement par courant résiduel | B Type |
| Durabilité mécanique | ≥6000 |
| Durabilité électrique | ≥4000 |
| Des courbes en virage | B, C, D |
| Degré de pollution | 2 |
| Classe de protection | IP 20 |
| Catégorie d'installation | Ⅲ |
| Normes | IEC61009-1, GB/T16917.1, IEC62423, GB/T22794 |
| Certification | CE CB CCC|Certifié DEKRA |
Tripping Characteristics (Reference Temperature: 30℃)
| Article | Curve de Triche | Test de courant (A) | État initial | Temps de déclenchement ou non-déclenchement | Résultat attendu | Commentaires |
| Retard | ≤63 | Froid | 1.13Dans | ≤1h | Non-chocant | |
| Retard | ≤63 | Suite au test précédent | 1.45In | ＜1h | Desperance | Le courant augmente en douceur jusqu'à la valeur spécifiée en 5s. |
| Retard | ≤32 | Froid | 2,55 en | 1＜t＜60s | Desperance | |
| Retard | >32 | Froid | 2,55 en | 1＜t＜120s | Desperance | |
| Instantané | Toute valeur | Froid | 3, 5, 10In | ≤0.1s | Non-chocant | B, C, D |
| Instantané | Toute valeur | Froid | 5, 10, 20In | ＜0.1s | Desperance | B, C, D |
Note: The term “cold” means that the test is carried out at a reference calibration temperature without load before the test.
Règles relatives aux conducteurs et section de la conduite
| Section de cuivre (mm²) | Courant nominal (A) |
| 1 | En ≤6 |
| 1.5 | 6＜Dans≤13 |
| 2.5 | 13＜Dans les 20 jours |
| 4 | 20＜En≤25 |
| 6 | 25＜Dans la limite de 32 |
| 10 | 32＜Dans ≤50 |
| 16 | 50＜In≤63 |
Designation de type
Des courbes en virage
Dimensions (mm)
Pourquoi choisir CHAC
CHAC Electric supplies electrical protection and control products for importers, distributors and equipment brands. For PXB6L-63B, agree the configuration, technical documents, approved sample and identification requirements before production. The company facilities shown below provide company context, not a claim that every model uses the same production or test process.
01
CONFIRM THE SPECIFICATION
Agree the PXB6L-63B configuration, circuit duty and installation requirements.
02
REVIEW THE DOCUMENTS
Confirm model-specific drawings and destination-market requirements.
03
APPROVE THE SAMPLE
Record the accepted configuration and marking requirements.
04
DEFINE ORDER CHECKS
Agree packaging, identification and delivery requirements in the quotation.
Ligne de montage automatisée
Laboratoire d'essai
Injection et estampage
Inspection de qualité
Qu'est-ce que nous pouvons personnaliser ?
Discuss PXB6L-63B product identification, packaging and documentation with CHAC. Each proposed change is subject to technical feasibility, marking rules and approval of the exact order; no altered rating or certification is implied.
Logo et identité visuelle
Submit logo artwork and marking requirements for review against the available print area and mandatory product markings.
Packaging & Manuals
Define carton labels, packaging language, product identification and instruction requirements for the destination market.
Configuration Selection
Specify PXB6L-63B with the required mechanism and leakage type, operating conditions and protection duty. Confirm the complete order combination.
Assembly Requirements
Provide the mounting and connection requirements for review. Changes to the housing, terminals or operating arrangement require engineering approval.
Market Documentation
Request documents covering the exact PXB6L-63B model and destination market. A standard reference alone is not evidence of certification.
Sample Approval
Agree the sample specification, drawing revision and acceptance criteria before confirming a production order.
Technical Documents and Support
PXB6L-63B Technical Documents
Request the PXB6L-63B datasheet, configuration drawing, installation instructions and available model-specific market documents.Request Datasheet
Dois-je avoir des documents techniques ?
Send the application, electrical requirements, assembly layout and destination market for configuration and document review.Contactez-nous
PXB6L-63B Product FAQ
What is the difference between electronic and electromagnetic RCBOs?
The terms describe different operating mechanisms, not the leakage waveform type. PXB6L-63B is the electromagnetic Type B model. Confirm the wiring, supply-condition behavior and test instructions for the exact device instead of assuming every electromagnetic or electronic design behaves identically.
Does Type B mean the breaker is for a DC supply?
No. Type B describes residual-current detection, including specified DC components; it does not establish a DC operating-voltage rating. PXB6L-63B is selected using its documented AC voltage and pole configuration.
Which sensitivity options are listed for PXB6L-63B?
The listed values are 30, 50, 100 and 300mA. Select the sensitivity required by the circuit and local rules and specify it separately from the 6–63A current rating.
How should I choose the PXB6L-63B residual-current sensitivity?
Select the mA rating from the circuit purpose, equipment instructions and local requirements. Rated current in amperes is a separate specification. Confirm the exact PXB6L-63B sensitivity variant and its operating-time data rather than using a larger threshold to mask recurring trips.
Why can a PXB6L-63B installation trip repeatedly?
Possible causes include insulation faults, accumulated equipment leakage, incorrect neutral connections or an unsuitable protection type. Have a qualified person investigate the circuit and follow the device test instructions before changing the rating or replacing protection.
What should an importer include in a PXB6L-63B inquiry?
Specify poles, AC supply, rated current, residual-current type and sensitivity, plus the overcurrent curve if ordering an RCBO. Add the destination market, required documents, quantity and marking requirements so the quotation identifies the exact configuration.
Specify the Right PXB6L-63B Configuration
Send CHAC your required configuration, application, destination market and estimated quantity. We will review the requested specification and provide the relevant technical documents and commercial proposal.
