PXB6Ln-40 Circuit Breaker Elektronik Residual Current dengan Proteksi Overcurrent
RCBO elektronik CHAC PXB6Ln-40 menggabungkan perlindungan arus lebih dan arus sisa dalam konfigurasi ringkas 1P+N. Perangkat ini tersedia dengan rating 6–40A, kurva B/C, serta opsi Tipe AC/A untuk sirkuit yang beroperasi pada tegangan 230/240V AC.
Gambaran Produk
CHAC PXB6Ln-40 1P+N electronic RCBO brings overload, short-circuit and residual-current protection into one device for 230/240V AC circuits. Its compact phase-and-neutral arrangement covers 6–40A, with B/C curves and Type AC/A residual-current options.
Bagi para importir, distributor, dan produsen peralatan, CHAC dapat meninjau konfigurasi yang diminta sesuai dengan persyaratan sirkuit serta dokumen pasar tujuan. Pastikan kesepakatan mengenai model yang tepat, gambar teknis, dan persyaratan penandaan sebelum persetujuan sampel atau pemesanan ulang.
Poin-Poin Pilihan Utama
Aplikasi Biasa
Use PXB6Ln-40 for single-phase branch circuits where the design requires both overcurrent and Proteksi arus sisa. Confirm panel fit and the neutral arrangement when replacing an MCB; similar front dimensions do not prove wiring compatibility.
Permohonan dan Panduan Pemilihan
| Item seleksi | PXB6Ln-40 configuration | Hal yang harus diverifikasi |
|---|---|---|
| Supply arrangement | 1P+N; 230/240V AC; 50/60Hz | Confirm the terminal diagram and the required neutral arrangement. |
| Current and curve | 6/10/16/20/25/32/40A; B or C | Match cable ampacity and load inrush. |
| Residual-current options | Type AC or A; 10/30/100mA | Specify the detection type and mA value for the protected circuit. |
| Short-circuit rating | Icn = Ics = 6000A | Verify the prospective fault current at the actual installation point. |
Use these checks to compare the protection function, configuration and related CHAC products before specifying PXB6Ln-40. Related products are selection alternatives or system components, not automatic replacements.
Choose the RCBO when leakage protection is required
The PXB6-40 MCB and PXB6Ln-40 RCBO perform different protection roles.
Check the neutral arrangement during replacement
Confirm line/load markings, the neutral terminal arrangement and the panel wiring before approving a replacement.
Compare PXB6-40 for the required function
Pemutus sirkuit CHAC PXB6-40 memberikan perlindungan overload dan short-circuit dengan pemutusan fase dan netral secara bersamaan. Desainnya yang kompak dengan 1P+N dapat menyuplai daya dari 6–40A pada tegangan AC 230/240V, dengan kurva B/C/D untuk pemilihan sesuai dengan karakteristik beban.
Compare PXB6LE-63 for the required function
RCBO elektronik CHAC PXB6LE-63 menggabungkan perlindungan atas beban, arus pendek, dan arus sisa dalam satu perangkat. Pilih dari empat susunan kutub, kurva B/C/D, dan sensitivitas Tipe AC/A yang sesuai dengan rangkaian, dengan arus pengenal mulai dari 6A hingga 63A.
Need Help Specifying PXB6Ln-40?
Send the circuit requirements, selected configuration, destination market and quantity for a model-specific review.
Choose the RCBO when leakage protection is required
The PXB6-40 MCB and PXB6Ln-40 RCBO perform different protection roles. The RCBO adds residual-current detection, so the procurement specification must include the leakage type and sensitivity as well as the current and curve.
Check the neutral arrangement during replacement
Confirm line/load markings, the neutral terminal arrangement and the panel wiring before approving a replacement. Avoid shared-neutral assumptions across circuits, and follow the installation and test instructions for the exact RCBO.
How to Specify a PXB6Ln-40 Order
Use the configuration details below in the purchase specification. Keep the approved drawing revision and product identification with the order so repeat deliveries can be checked consistently.
| Rincian pesanan | Information to include |
|---|---|
| Supply arrangement | 1P+N; 230/240V AC; 50/60Hz — Confirm the terminal diagram and the required neutral arrangement. |
| Current and curve | 6/10/16/20/25/32/40A; B or C — Match cable ampacity and load inrush. |
| Residual-current options | Type AC or A; 10/30/100mA — Specify the detection type and mA value for the protected circuit. |
| Short-circuit rating | Icn = Ics = 6000A — Verify the prospective fault current at the actual installation point. |
| Project and documents | Supply the application, installation conditions and destination-market document requirements. |
| Quantity and identification | State the quantity, sample requirement, packaging language and any proposed branding; confirm feasibility before approval. |
Check Installation Fit Before Approval
Spesifikasi Teknis
| Parameter | |
| Rated Voltage | 230/240V |
| Rated Insulation Voltage(Ui) | 400V |
| Tegangan Tahan Impuls Terukur (Uimp) | 4000V |
| Arus Pengenal (In) | 6, 10, 16, 20, 25, 32, 40 |
| Rated Residual Operating Current(IΔn) | 10、30、100mA |
| Residual Current Trip Type | AC type、A type |
| Frekuensi Terukur | 50/60Hz |
| Jumlah Tiang | 1P+N |
| Kapasitas Pemutusan Arus Hubung Singkat Terukur (Icn = Ics) | 6000A |
| Ketahanan Mekanis | ≥10000 |
| Daya Tahan Listrik | ≥4000 |
| Jenis Tripping Instan | B、C |
| Jarak Kisi | 50mm |
| Tingkat Perlindungan | IP 20 |
| Kepatuhan Standar | IEC61009-1, GB/T 16917.1 |
| Sertifikasi | CE CB CCC |DEKRA Certified |
Karakteristik Tripping (Suhu Referensi: 30℃)
| Item | Kurva Tripping | Arus Uji (A) | Status Awal | Batas waktu untuk tripping atau tidak tripping | Hasil yang diharapkan | Komentar |
| a | B、C | 1.13In | Dingin | t≤1h | Tidak tersandung | Arus saat ini naik dengan lancar hingga nilai yang ditentukan dalam 5s |
| b | B、C | 1.45In | Item berikutnya adalah sebuah tes | t＜1h | Tersandung | |
| c | B、C | 2.55In | Dingin | 1s＜t＜60s(In≤32A) 1s＜t＜120s(Dalam>32A) |
Tersandung | |
| d | B | 3In | Dingin | t≤0.1s | Tidak tersandung | Nyalakan catu daya dengan menutup sakelar bantu. |
| C | 5In | |||||
| e | B | 5In | Dingin | t＜0.1s | Tersandung | Nyalakan catu daya dengan menutup sakelar bantu. |
| C | 10In |
Note: The :erm “cold” means that the test is carried out at at a reference calibration temperature without load before the test.
Persyaratan konduktor dan bagian penampang
| Copper cross-section(mm²) | Arus pengenal In(A) |
| 1 | In≤6 |
| 1.5 | 6＜In≤13 |
| 2.5 | 13＜In≤20 |
| 4 | 20＜In≤25 |
| 6 | 25＜In≤32 |
| 10 | 32＜In≤40 |
Penamaan tipe
Kurva tripping
Dimensi (mm)
Mengapa Memilih CHAC
CHAC Electric supplies electrical protection and control products for importers, distributors and equipment brands. For PXB6Ln-40, agree the configuration, technical documents, approved sample and identification requirements before production. The company facilities shown below provide company context, not a claim that every model uses the same production or test process.
01
KONFIRMASI SPESIFIKASI
Agree the PXB6Ln-40 configuration, circuit duty and installation requirements.
02
TINJAU DOKUMEN-DOKUMEN
Konfirmasikan gambar yang spesifik untuk model dan persyaratan pasar tujuan.
03
SETUJUI SAMPEL
Catat konfigurasi yang diterima dan persyaratan penandaan.
04
TENTUKAN CEK PESANAN
Setujui persyaratan pengemasan, identifikasi, dan pengiriman dalam penawaran.
Barisan Perakitan Otomatis
Laboratorium Pengujian
Injeksi & Stamping
Pemeriksaan Kualitas
Apa yang Dapat Kami Sesuaikan?
Discuss PXB6Ln-40 product identification, packaging and documentation with CHAC. Each proposed change is subject to technical feasibility, marking rules and approval of the exact order; no altered rating or certification is implied.
Logo & Branding
Kirimkan karya seni logo dan persyaratan penandaan untuk ditinjau sesuai dengan area cetak yang tersedia serta penandaan produk wajib.
Kemasan & Manual
Tentukan label karton, bahasa pada kemasan, identifikasi produk, serta persyaratan instruksi untuk pasar tujuan.
Pemilihan Konfigurasi
Specify PXB6Ln-40 with the required supply arrangement, operating conditions and protection duty. Confirm the complete order combination.
Assembly Requirements
Provide the mounting and connection requirements for review. Changes to the housing, terminals or operating arrangement require engineering approval.
Dokumentasi Pasar
Request documents covering the exact PXB6Ln-40 model and destination market. A standard reference alone is not evidence of certification.
Persetujuan Sampel
Setujui spesifikasi sampel, revisi gambar, dan kriteria penerimaan sebelum memastikan pesanan produksi.
Dokumen Teknis dan Dukungan
PXB6Ln-40 Technical Documents
Request the PXB6Ln-40 datasheet, configuration drawing, installation instructions and available model-specific market documents.Minta Lembar Data
Butuh Dokumen Teknis?
Send the application, electrical requirements, assembly layout and destination market for configuration and document review.Hubungi Kami
PXB6Ln-40 Product FAQ
Mengapa menggunakan RCBO daripada MCB?
An RCBO combines overcurrent and residual-current protection. PXB6Ln-40 adds Type AC/A leakage detection to overload and short-circuit protection, whereas an ordinary MCB does not detect residual current.
What is the difference between 1P+N and 2P RCBOs?
The terms describe the conductor arrangement, but the switched and protected poles must be checked in the device documentation. PXB6Ln-40 is specified as 1P+N; do not assume it is electrically interchangeable with every 2P device.
Does PXB6Ln-40 offer a D curve?
The published PXB6Ln-40 options are B and C. Do not order a D-curve version by copying options from a different series. Request another suitable model if the design requires a different characteristic.
How should I choose the PXB6Ln-40 residual-current sensitivity?
Select the mA rating from the circuit purpose, equipment instructions and local requirements. Rated current in amperes is a separate specification. Confirm the exact PXB6Ln-40 sensitivity variant and its operating-time data rather than using a larger threshold to mask recurring trips.
Why can a PXB6Ln-40 installation trip repeatedly?
Possible causes include insulation faults, accumulated equipment leakage, incorrect neutral connections or an unsuitable protection type. Have a qualified person investigate the circuit and follow the device test instructions before changing the rating or replacing protection.
What should an importer include in a PXB6Ln-40 inquiry?
Specify poles, AC supply, rated current, residual-current type and sensitivity, plus the overcurrent curve if ordering an RCBO. Add the destination market, required documents, quantity and marking requirements so the quotation identifies the exact configuration.
Specify the Right PXB6Ln-40 Configuration
Send CHAC your required configuration, application, destination market and estimated quantity. We will review the requested specification and provide the relevant technical documents and commercial proposal.
