Bộ chuyển mạch shunt + công tắc phụ CQAX2
Phần CQAX2 Công tắc phụ chuyển mạch shunt được thiết kế cho chức năng giải phóng shunt và công tắc phụ kết hợp. Các dữ liệu được công bố bao gồm các mạch tín hiệu AC 230V / DC 110V; điện áp Ui 415V và phạm vi hoạt động của shunt là 160–260V. Trước khi đặt hàng, vui lòng xác nhận về giao diện phụ kiện, mạch điều khiển, hệ thống dây điện và yêu cầu của thị trường đích.
Giới thiệu sản phẩm
CQAX2 is a shunt trip auxiliary switch for low-voltage panel and breaker accessory systems. The summary below uses the published model record; it does not replace the complete drawing, wiring instructions or project design review.
Combined shunt release and auxiliary switch. shunt operating range 160–260V is the published electrical reference. Compatibility, contact logic and installation details must be confirmed for the exact ordered version.
Tính năng chính
Các ứng dụng điển hình
Use it where a compatible breaker must be tripped from a remote control or emergency circuit. Confirm the control voltage, trip logic, accessory interface and safe isolation procedure; a shunt release is not an undervoltage release.
Hướng dẫn đăng ký và tuyển chọn
Use the product-specific values below as a shortlist, then validate the complete circuit and mechanical interface. An accessory rating alone does not establish compatibility with every breaker, panel or control system.
| Điểm lựa chọn | CQAX2 reference | Những gì dự án phải xác nhận |
|---|---|---|
| Chức năng chính | Cả hai chức năng giải phóng van shunt và công tắc phụ được kết hợp lại | Confirm the required signal or protection function before ordering |
| Electrical reference | Các mạch tín hiệu AC 230V / DC 110V; Ui 415V | Match the project control or supply circuit |
| Rating / operating window | Dải hoạt động của thiết bị shunt: 160–260V | Use the published range; do not infer missing ratings |
| Interface | cho giao diện phụ kiện của bộ ngắt điện tương thích | Verify the compatible breaker, panel, base or rail interface |
| Wiring | Tham khảo dây dẫn 1 × 2,5mm² | Final conductor and protection selection follows the project design and local rules |
| Documents | IEC 60947-5-1 | Request the exact drawing and applicable compliance documents for the ordered version |
Function and signal path
Combined shunt release and auxiliary switch. Confirm whether the circuit needs status feedback, fault alarm, remote trip or voltage release.
Control-circuit fit
AC 230V / DC 110V signal circuits; Ui 415V. Match the control voltage and operating window to the project circuit; never assume a nearby rating is interchangeable.
Mechanical interface
for compatible breaker accessory interface. Confirm breaker family, rail/base or panel interface, clearances and maintenance access.
Wiring and documentation
1 × 2.5mm² conductor reference. Request the exact drawing and installation document for the ordered configuration.
Hướng dẫn đặt hàng
- Specify the exact model and accessory function: CQAX2, combined shunt release and auxiliary switch.
- State the control/supply voltage and any required operating window.
- Confirm the compatible breaker family, panel, base or DIN-rail interface.
- Provide quantity, destination market, wiring details and required technical documents.
- Ask CHAC to verify any non-standard marking, packaging or configuration request before production.
Kiểm tra lắp đặt và phối hợp
- Use the exact product drawing and installation instructions for the ordered configuration.
- Verify voltage, conductor, terminal, enclosure, clearances and maintenance access.
- Check the accessory’s signal or trip logic against the control circuit and upstream/downstream protection.
- Installation, testing and maintenance must be carried out by qualified personnel under applicable rules.
Tên loại
Kích thước (mm)
Đặc điểm kỹ thuật
| Tham số | ||
| AC-15 | Rated Operational Voltage | AC 230V 50Hz |
| Rated Insulation Voltage | 415V | |
| DC-13 | Rated Operational Voltage | DC110V |
| Rated operating current | 1A | |
| Operating Characteristics | When the voltage is between 160-260V, the trip unit can reliably operate. | |
| Mechanical Life | Not less than 4,000 operations. | |
| Standards | GB/T 14048.5. IEC 60947-5-1 | |
Conductor requirements and cross section
| Copper cross-section(mm2) |
| 1X2.5 |
Tại sao nên chọn CHAC
With 30+ years of manufacturing experience, 1100+ employees, 100M+ poles
annual capacity and 90% automated production, CHAC provides stable production capacity and strict
quality control for global OEM/ODM customers. Our in-house manufacturing system supports long-term
cooperation for electrical brands, importers and distributors.
30+
NĂM KINH NGHIỆM
Chuyên sản xuất thiết bị điện hạ thế
1100+
CÔNG NHÂN
Đội ngũ chuyên nghiệp đảm bảo chất lượng và giao hàng ổn định
100 triệu người
Sức chứa hàng năm của các cột
Năng lực sản xuất quy mô lớn để đáp ứng nhu cầu toàn cầu
90%
SẢN XUẤT TỰ ĐỘNG
Tự động hóa nâng cao cho hiệu quả cao và tính nhất quán
Dây chuyền lắp ráp tự động
Phòng thí nghiệm kiểm nghiệm
Xay và dập
Kiểm tra chất lượng
Strict quality control system ensures every product meets global standards.
Chúng tôi có thể tùy chỉnh những gì?
For CQAX2 projects, CHAC can review private-label marking, packaging, approved electrical options, accessory interface and technical-document requirements. Requests outside the published range are subject to engineering evaluation, testing, MOQ and project feasibility.
Logo & Thương hiệu
Private-label marking and nameplate options are subject to artwork review and sample approval.
Gói bao bì
Tùy chỉnh
Cartons, labels and manuals can be prepared for the approved order specification and destination market.
Điện
Tùy chỉnh
Published AC 230V / DC 110V signal circuits; Ui 415V, shunt operating range 160–260V and interface options are reviewed against the ordered CQAX2 configuration; non-standard requests require technical evaluation.
Sản phẩm
Vẻ ngoài
Appearance options can be reviewed subject to tooling, MOQ, marking requirements and technical feasibility.
Chứng nhận
Hỗ trợ
Datasheets, drawings and verified document information are supplied for the applicable approved configuration.
Kỹ thuật
Phát triển
Project support may include drawing review, sample evaluation, testing and production planning, subject to technical approval.
Tải xuống
CQAX2 Technical Documents
Request the current datasheet, drawings, wiring information and applicable documents for the ordered accessory configuration.
Need Technical Documents?
Contact us for datasheets, certificates, drawings, selection guidance or OEM/ODM project support.
CQAX2 Product FAQ
What is the CQAX2 used for?
The CQAX2 provides remote shunt tripping for a compatible breaker system. It is selected as a control accessory, not as a standalone overcurrent device.
What is the difference between a shunt trip and an undervoltage release?
A shunt trip is generally energize-to-trip, while an undervoltage release responds to a loss or reduction of its control voltage. Confirm the required trip logic for the project.
What control voltage does the CQAX2 use?
The published reference is AC 230V / DC 110V signal circuits; Ui 415V, with shunt operating range 160–260V. Do not substitute another coil voltage without confirming the exact model.
Which breaker is compatible with the CQAX2?
The product record specifies a compatible for compatible breaker accessory interface. Confirm the breaker model, interface and accessory combination from the drawing.
Can a shunt release provide overload protection?
No. It trips a compatible breaker remotely; overload and short-circuit protection come from the breaker and must be selected separately.
What wiring is listed for the CQAX2?
The published conductor reference is 1 × 2.5mm² conductor reference. Final wiring, isolation and control-circuit protection must follow the project design and instructions.
Confirm the Right CQAX2 Configuration
Share the required function, voltage, interface, quantity, destination market and technical documents. CHAC will review the request against the published accessory data.
