A plug-in distribution box RFQ should describe the required circuit capacity and the exact product record, rather than asking for a generic “distribution box.” Add the main-switch format, mounting form, entry details, and intended assembly role so the response can be checked against a specific configuration.
- Frequently Asked Questions: Plug-In Distribution Boxes
Part 1. Start with the assembly question
“Plug-in” identifies an approach to fitting circuit breakers into a distribution box; it does not tell a supplier how many outgoing circuits, what main-switch arrangement, or what enclosure record is needed. Define the assembly question first: what must be accommodated, what is being switched, and which product configuration is being requested.
That framing is different from a general distribution-board way-count RFQ. Way count is important, but it is only one field. A plug-in box inquiry must keep the intended circuit capacity tied to the selected box format and the record that describes it.
| Buyer input | Why it belongs in the request | What it does not settle |
|---|---|---|
| Intended assembly role | Gives the reviewer the equipment context | A site-specific electrical design |
| Required circuit count | Narrows the requested configuration | Automatic allowance for future circuits |
| Main-switch requirement | Identifies the requested entry format | A wiring or protection decision |
| سجل المنتج | Shows which published item is being considered | Project acceptance |
For a product-line view, CHAC’s معدات التوزيع الكهربائي page is the right starting point. The purpose of this article is more focused: create an RFQ that preserves the distinction between a product record and a completed panel decision.
Part 2. Convert circuit count into a quote field
Circuit count should appear as a requested configuration, not as an afterthought in a message thread. The buyer should state the number of circuits needed in the intended assembly, then identify whether the main-switch format and relevant product family are part of the same request.
Published selection guides such as VIOX’s distribution-box overview treat capacity and enclosure context as connected considerations. That does not mean a published capacity label selects a complete assembly; it means the RFQ needs enough information for a reviewer to locate the relevant product record.
A useful entry might read “requested circuit count: ; requested main-switch format: ; product record for review: __.” The blanks are deliberate. They prevent a seller from turning a general circuit-count label into an assumption about the buyer’s application.
Part 3. Keep record-level features together
CHAC’s CQMG10 plug-in distribution box product record lists 4, 6, 10, and 12-circuit versions with a 2P main switch. It also states a cold-rolled-steel box, a high-impact PC visible cover, pre-punched Φ32/Φ25 knockouts, surface mounting, and its published protection wording.
Those are record-level fields, so quote them as fields. Do not turn them into an unqualified statement that every CQMG10 item matches a particular installation, cable entry, or breaker set.
مهم: A product listing is a configuration reference, not a site approval. VIOX’s distribution-box selection guidance also frames enclosure selection as a set of inputs that must be considered together.
| Published CQMG10 field | RFQ wording that keeps scope clear |
|---|---|
| 4 / 6 / 10 / 12 circuits | “State the required circuit version for review.” |
| 2P main switch | “Confirm the requested main-switch format against the selected record.” |
| Φ32 / Φ25 knockouts | “List required entry detail and attach the applicable drawing.” |
| Surface mounting | “State the requested mounting form; confirm against the product record.” |
Part 4. Build a plug-in box RFQ that can be reviewed
The strongest RFQ is short enough to read but specific enough to trace. Start with the intended assembly, then attach the current drawing or written requirement and identify the published product record being discussed.
| أرسل مع طلب عرض الأسعار | Review purpose | Example boundary |
|---|---|---|
| Requested circuit count | Connects capacity to the desired version | “Requested count from assembly record” |
| Main-switch format | Keeps entry-device request explicit | “State required format separately” |
| Mounting form | Places the box in the correct product context | “Surface mounting requested; site conditions supplied separately” |
| Entry / knockout needs | Makes the physical-interface question visible | “Reference drawing or entry requirement attached” |
| Product page and quantity | Lets the reviewer identify the record | “CQMG10 record and requested quantity attached” |
The article about distribution boxes versus junction boxes can help distinguish the product category. It should not be used to infer that a particular CQMG10 configuration is suitable for a buyer’s assembly.
Part 5. Where CQMG10 fits the request
CQMG10 is useful when a buyer needs a named plug-in-box record with stated circuit versions, a 2P main-switch reference, and visible entry/mounting fields to review. The CQMG10 product page gives the RFQ a stable reference instead of relying on a photograph or a loose product description.
It is not a recommendation to select CQMG10 for every panel. A buyer should provide the intended circuit count, requested main-switch form, mounting statement, entry details, and any drawing that controls the final assembly before seeking a response.
For OEM or program-level requirements after those inputs are organised, CHAC’s power-distribution customization page provides the appropriate route. The conversation can then remain tied to the information actually supplied.
Part 6. Keep product documentation separate from site approval
Product information answers what a named page publishes. It does not decide a site’s wall condition, circuit arrangement, installation method, or approval status. Those decisions need the complete project information and the relevant responsible review.
استخدم CHAC contact page to send the selected record and the RFQ inputs together. If the circuit count, mounting form, or entry condition is still unknown, obtain that information before asking for a final configuration response.
Frequently Asked Questions: Plug-In Distribution Boxes
What is a plug-in distribution box?
It is a distribution-box format described around a plug-in arrangement for circuit breakers. The RFQ should still identify the required circuit count, main-switch format, mounting, and selected product record.
How should circuit count be stated?
State the required circuit version from the intended assembly and attach the relevant product record. Avoid using a general capacity label as a substitute for the actual configuration request.
Which product details should be in the RFQ?
Include the circuit count, main-switch request, mounting form, entry or knockout requirements, quantity, and the product page or document to be reviewed.
What does the CQMG10 page list?
The named page lists 4, 6, 10, and 12-circuit versions, a 2P main switch, pre-punched Φ32/Φ25 knockouts, surface mounting, and other published construction and protection details. Confirm the selected item before applying those fields.
Do knockout details replace a drawing review?
No. Published knockout information can identify a product feature, but a drawing or equivalent project record is still needed to evaluate the buyer’s actual entry requirement.
Can a product page approve an installation?
No. A product page documents the product record. It does not approve a site condition, circuit arrangement, or completed installation.
