مفتاح عزل التيار المستمر للبطاريات الكهروضوئية CQDS-32
يوفر مفتاح العزل الكهروضوئي للتيار المستمر CHAC CQDS-32 عزلًا وتبديلًا غير متكرر بين الوحدات الكهروضوئية والمحولات. يدعم تصميمه غير القطبي تكوينات DC-PV1/DC-PV2 المختارة حتى 1200V للتيار المستمر و32A؛ يُرجى اتباع ترتيب التوصيل المحدد للتكوين المختار.
مواصفات المنتج
الجنة العليا للأشخاص ذوي الإعاقة CQDS-32 photovoltaic DC isolation switch provides a disconnection point between PV modules and the inverter. Its non-polar design, lockable handle and DC-PV1/DC-PV2 options support selection for the actual string arrangement rather than voltage alone.
بالنسبة للمستوردين والموزعين وشركات تصنيع المعدات، يمكن لشركة CHAC مراجعة التكوين المطلوب وفقًا لمتطلبات الدائرة الكهربائية ووثائق سوق الوجهة. يُرجى الاتفاق على الطراز الدقيق والرسومات ومتطلبات العلامات قبل اعتماد العينة أو تقديم طلب تكرار.
نقاط الاختيار الرئيسية
الاستخدامات النموذجية
Use the CQDS-32 in a protected PV assembly where the design requires DC isolation and infrequent switching. The IP20 device needs a suitable enclosure; it is not a weatherproof rooftop disconnect by itself.
طلبات واقتراحات واختيار المرشحين
| مكون الاختيار | CQDS-32 configuration | ما يجب التحقق منه |
|---|---|---|
| Operating duty | DC-PV1 / DC-PV2 | Match the switching duty to the PV string arrangement and possible reverse current. |
| Voltage and current | Up to 1200V DC / 32A, configuration dependent | Confirm the paired voltage/current rating and wiring diagram; do not combine independent maximum values. |
| Connections | Four-pole configurations with designated connection diagrams | Use the specified terminal bridges and conductor arrangement, not a layout inferred from the number of poles. |
| التثبيت | IP20; vertical or horizontal installation | Confirm enclosure protection, access to the handle and cable bending space. |
Use these checks to compare the protection function, configuration and related CHAC products before specifying CQDS-32. Related products are selection alternatives or system components, not automatic replacements.
Choose the switching duty for the PV array
Parallel strings can introduce reverse-current conditions that a simple voltage check misses.
Use the wiring diagram for the ordered configuration
A non-polar design does not make every series connection acceptable.
Compare CQHS for the required function
The CHAC CQHS PV DC combiner box combines photovoltaic string inputs with a DC isolator for DC-side disconnection. Choose from six input/output configurations to match your PV array layout, and confirm the voltage and current ratings for the selected model.
Compare CQBD-63 for the required function
يوفّر قاطع الدائرة DC من CHAC CQBD-63 حماية ضد التحميل الزائد والقصور الكهربائي، ويتميز بتصميم غير قطبي ومؤشر لوضع الاتصال. تغطي النسخ ذات القطب الواحد إلى الأربعة أقطاب جهودًا تيار مستمر تتراوح من 300V إلى 1200V؛ قم بمطابقة ترتيب الأقطاب وخاصية الفصل مع الدائرة.
Need Help Specifying CQDS-32?
Send the circuit requirements, selected configuration, destination market and quantity for a model-specific review.
Choose the switching duty for the PV array
Parallel strings can introduce reverse-current conditions that a simple voltage check misses. Provide the string arrangement, maximum open-circuit voltage at the lowest design temperature and design current. CHAC can then confirm the applicable CQDS-32 configuration and utilization category.
Use the wiring diagram for the ordered configuration
A non-polar design does not make every series connection acceptable. Match the terminal arrangement to the approved drawing and check that all required live conductors are isolated. The switch does not replace the array overcurrent-protection design.
How to Specify a CQDS-32 Order
Use the configuration details below in the purchase specification. Keep the approved drawing revision and product identification with the order so repeat deliveries can be checked consistently.
| Order detail | Information to include |
|---|---|
| Operating duty | DC-PV1 / DC-PV2 — Match the switching duty to the PV string arrangement and possible reverse current. |
| Voltage and current | Up to 1200V DC / 32A, configuration dependent — Confirm the paired voltage/current rating and wiring diagram; do not combine independent maximum values. |
| Connections | Four-pole configurations with designated connection diagrams — Use the specified terminal bridges and conductor arrangement, not a layout inferred from the number of poles. |
| التثبيت | IP20; vertical or horizontal installation — Confirm enclosure protection, access to the handle and cable bending space. |
| Project and documents | Supply the application, installation conditions and destination-market document requirements. |
| Quantity and identification | State the quantity, sample requirement, packaging language and any proposed branding; confirm feasibility before approval. |
Check Installation Fit Before Approval
Parameter table
| Electrical Characteristics | |
| model | DS1-32 |
| function | Isolation and control |
| standard | IEC60947-3,AS60947.3 |
| Usage category | DC-PV1 / DC-PV2 |
| series | 4P |
| rated frequency | DC |
| Rated working voltage (Ue) | 300V/600V/800V/1000V/1200V |
| Rated insulation voltage (Ui) | 1200V |
| Rated short-time withstand current (Icw) | 1KA/1S(4,4S,4B),1.7KA/1S(2H) |
| جهد التحمل نبضي المقنن | 8.0KV |
| overvoltage category | Ⅱ |
| polarity | Mechanical polarity is non-polar,and the “+” and “-” polarities can be interchanged. |
| Service life/number of operations | |
| mechanical life | 9700 |
| electrical life | 300 |
| Installation environment | |
| Protection level | IP20 |
| Storage temperature | من -40 درجة مئوية إلى +85 درجة مئوية |
| Installation Type | Vertical or horizontal |
| pollution level | 3 |
Wiring swap – corresponding diagrams
| 4-pole | 4T Four pole with input terminalOutput top |
4-pole Bottom input and output |
4-pole top input,bottom output | |
| مواصفات | 4 | 4B | 4S | |
| Contact point connection line graph |  |
 |
 |
 |
| switch example |  |
 |
 |
 |
Product model and meaning
Product dimensions
لماذا تختار CHAC
CHAC Electric supplies electrical protection and control products for importers, distributors and equipment brands. For CQDS-32, agree the configuration, technical documents, approved sample and identification requirements before production. The company facilities shown below provide company context, not a claim that every model uses the same production or test process.
01
CONFIRM THE SPECIFICATION
Agree the CQDS-32 configuration, circuit duty and installation requirements.
02
REVIEW THE DOCUMENTS
Confirm model-specific drawings and destination-market requirements.
03
APPROVE THE SAMPLE
Record the accepted configuration and marking requirements.
04
DEFINE ORDER CHECKS
Agree packaging, identification and delivery requirements in the quotation.
خط التجميع الآلي
مختبر اختبار
حقن وختم
فحص الجودة
ما الذي يمكننا تخصيصه؟
Discuss CQDS-32 product identification, packaging and documentation with CHAC. Each proposed change is subject to technical feasibility, marking rules and approval of the exact order; no altered rating or certification is implied.
الشعار والعلامة التجارية
Submit logo artwork and marking requirements for review against the available print area and mandatory product markings.
Packaging & Manuals
Define carton labels, packaging language, product identification and instruction requirements for the destination market.
Configuration Selection
Specify CQDS-32 with the required operating duty, operating conditions and protection duty. Confirm the complete order combination.
Assembly Requirements
Provide the mounting and connection requirements for review. Changes to the housing, terminals or operating arrangement require engineering approval.
Market Documentation
Request documents covering the exact CQDS-32 model and destination market. A standard reference alone is not evidence of certification.
Sample Approval
Agree the sample specification, drawing revision and acceptance criteria before confirming a production order.
Technical Documents and Support
CQDS-32 Technical Documents
Request the CQDS-32 datasheet, configuration drawing, installation instructions and available model-specific market documents.Request Datasheet
هل تحتاج إلى وثائق فنية؟
Send the application, electrical requirements, assembly layout and destination market for configuration and document review.اتصل بنا
CQDS-32 Product FAQ
Can a DC isolator switch replace a circuit breaker?
No. The CQDS-32 provides switching and isolation, not an automatic overload or short-circuit trip function. Specify the required fuse or circuit breaker separately and coordinate it with the PV circuit.
What is the difference between DC-PV1 and DC-PV2?
They identify different PV switching duties, including different reverse-current conditions. Select the category using the array arrangement and manufacturer ratings. The CQDS-32 lists both categories, but the applicable voltage, current and wiring combination must be confirmed.
Can CQDS-32 be installed outdoors without a box?
The device is IP20, so it should not be exposed as a standalone outdoor switch. Select an enclosure, glands and installation position suitable for the site and preserve the required operating access.
Can I choose CQDS-32 by current rating alone?
No. Check operating voltage, poles, utilization category, switching duty, fault coordination and the installation layout together. Confirm the selected combination in the model-specific documentation before approving a substitute.
Can an isolator be switched under load?
Only within its documented switching duty and voltage/current combination. Confirm the applicable utilization category and instructions for CQDS-32; do not assume that every device called an isolator has the same load-break capability.
What information is needed for a CQDS-32 quotation?
Provide the supply voltage, required current, load duty, pole arrangement, installation drawing and fault-coordination requirements. Add control or auxiliary-contact needs where applicable, plus quantity and destination market.
Specify the Right CQDS-32 Configuration
Send CHAC your required configuration, application, destination market and estimated quantity. We will review the requested specification and provide the relevant technical documents and commercial proposal.
