PXB6-MV MN OverUnder Voltage Release
ال PXB6-MV/MN over under voltage release is specified for over/under-voltage release. Published data includes 230V AC 50Hz; Ui 415V and normal 175–255V; overvoltage trip ≥265±10V; undervoltage trip ≤165±10V. Confirm the accessory interface, control circuit, wiring and destination-market requirements before ordering.
Product Overview
PXB6-MV/MN is a over under voltage release for low-voltage panel and breaker accessory systems. The summary below uses the published model record; it does not replace the complete drawing, wiring instructions or project design review.
Over/under-voltage release. normal 175–255V; overvoltage trip ≥265±10V; undervoltage trip ≤165±10V is the published electrical reference. Compatibility, contact logic and installation details must be confirmed for the exact ordered version.
Key Features
Typical Applications
Use it where the supply voltage must be monitored against the model's published operating and trip window. Confirm the system voltage, fault/coordination study and whether the project needs over/under-voltage release or another protection function.
Applications and Selection Guide
Use the product-specific values below as a shortlist, then validate the complete circuit and mechanical interface. An accessory rating alone does not establish compatibility with every breaker, panel or control system.
| Selection point | PXB6-MV/MN reference | What the project must confirm |
|---|---|---|
| Primary function | over/under-voltage release | Confirm the required signal or protection function before ordering |
| Electrical reference | 230V AC 50Hz; Ui 415V | Match the project control or supply circuit |
| Rating / operating window | normal 175–255V; overvoltage trip ≥265±10V; undervoltage trip ≤165±10V | Use the published range; do not infer missing ratings |
| Interface | for compatible PXB6 breaker accessory interface | Verify the compatible breaker, panel, base or rail interface |
| Wiring | 0.5–2.5mm² conductor reference | Final conductor and protection selection follows the project design and local rules |
| مستندات | IEC 60947-5-1 | Request the exact drawing and applicable compliance documents for the ordered version |
Function and signal path
Over/under-voltage release. Confirm whether the circuit needs status feedback, fault alarm, remote trip or voltage release.
Control-circuit fit
230V AC 50Hz; Ui 415V. Match the control voltage and operating window to the project circuit; never assume a nearby rating is interchangeable.
Mechanical interface
for compatible PXB6 breaker accessory interface. Confirm breaker family, rail/base or panel interface, clearances and maintenance access.
Wiring and documentation
0.5–2.5mm² conductor reference. Request the exact drawing and installation document for the ordered configuration.
Ordering Guide
- Specify the exact model and accessory function: PXB6-MV/MN, over/under-voltage release.
- State the control/supply voltage and any required operating window.
- Confirm the compatible breaker family, panel, base or DIN-rail interface.
- Provide quantity, destination market, wiring details and required technical documents.
- Ask CHAC to verify any non-standard marking, packaging or configuration request before production.
Installation and Coordination Checks
- Use the exact product drawing and installation instructions for the ordered configuration.
- Verify voltage, conductor, terminal, enclosure, clearances and maintenance access.
- Check the accessory’s signal or trip logic against the control circuit and upstream/downstream protection.
- Installation, testing and maintenance must be carried out by qualified personnel under applicable rules.
تعيين النوع
الأبعاد (مم)
المواصفات الفنية
| معامل | |
| Rated Operational Voltage (V) | AC 230V 50Hz |
| Rated Insulation Voltage (V) | 415V |
| Operating Characteristics | Maintains long-term circuit breaker operation at voltages between 175V – 255V. |
| Trips at voltages ≥ 265±10V (Over-Voltage) | |
| Trips at voltages ≤ 165±10V (Under-Voltage) | |
| حياة كهربائية | 4000 |
| معايير | IEC 60947-5-1 |
متطلبات الموصل والمقطع العرضي
| مقطع عرضي للنحاس (مم2) |
| 0.5~2.5 |
لماذا تختار CHAC
مع خبرة تصنيع تزيد عن 30 عامًا، وأكثر من 1100 موظف، وأكثر من 100 مليون عمود
بفضل طاقتها الإنتاجية السنوية ونظام الإنتاج الآلي 90%، توفر شركة CHAC طاقة إنتاجية مستقرة ومعايير صارمة
مراقبة الجودة لعملاء OEM/ODM العالميين. يدعم نظام التصنيع الداخلي الخاص بنا على المدى الطويل
تعاون مع العلامات التجارية الكهربائية والمستوردين والموزعين.
30+
سنوات الخبرة
متخصص في تصنيع المعدات الكهربائية منخفضة الجهد
1100+
الموظفين
فريق محترف يضمن جودة ثابتة والتسليم
١٠٠ مليون+
السعة السنوية للأعمدة
قدرة إنتاجية واسعة النطاق لتلبية الطلب العالمي
90%
الإنتاج الآلي
الأتمتة المتقدمة لتحقيق كفاءة واتساق عاليين
خط التجميع الآلي
مختبر اختبار
حقن وختم
فحص الجودة
نظام صارم لمراقبة الجودة يضمن أن كل منتج يلبي المعايير العالمية.
ما الذي يمكننا تخصيصه؟
For PXB6-MV/MN projects, CHAC can review private-label marking, packaging, approved electrical options, accessory interface and technical-document requirements. Requests outside the published range are subject to engineering evaluation, testing, MOQ and project feasibility.
الشعار والعلامة التجارية
Private-label marking and nameplate options are subject to artwork review and sample approval.
تعبئة وتغليف
تخصيص
Cartons, labels and manuals can be prepared for the approved order specification and destination market.
كهربائي
تخصيص
Published 230V AC 50Hz; Ui 415V, normal 175–255V; overvoltage trip ≥265±10V; undervoltage trip ≤165±10V and interface options are reviewed against the ordered PXB6-MV/MN configuration; non-standard requests require technical evaluation.
منتج
مظهر
Appearance options can be reviewed subject to tooling, MOQ, marking requirements and technical feasibility.
شهادة
دعم
Datasheets, drawings and verified document information are supplied for the applicable approved configuration.
الهندسة
تطوير
Project support may include drawing review, sample evaluation, testing and production planning, subject to technical approval.
تنزيل
قاطع الدائرة المصغر سلسلة PXB6
نظرة عامة كاملة على مكونات كهربائية منخفضة الجهد ومرجع لاختيار المنتج.
هل تحتاج إلى وثائق فنية؟
اتصل بنا للحصول على أوراق البيانات، والشهادات، والرسومات، وإرشادات الاختيار، أو دعم مشاريع OEM/ODM.
PXB6-MV/MN Product FAQ
How does the PXB6-MV/MN work?
The PXB6-MV/MN monitors the supply against its published window: normal 175–255V; overvoltage trip ≥265±10V; undervoltage trip ≤165±10V. When the relevant limit is reached, the compatible breaker accessory function responds as specified by the product design.
What is an over/under-voltage protection device?
It monitors supply voltage and operates when voltage moves outside defined limits. The correct thresholds and reset behavior must be taken from the selected model's documentation.
What voltage range is published for the PXB6-MV/MN?
The published reference is 230V AC 50Hz; Ui 415V and normal 175–255V; overvoltage trip ≥265±10V; undervoltage trip ≤165±10V. Confirm the system voltage, tolerance and installation conditions before ordering.
Is the PXB6-MV/MN the same as a shunt trip release?
No. A voltage release responds to its monitored voltage window, while a shunt trip is controlled by a separate energizing signal. Select the function that matches the protection or control logic.
Which breaker is compatible with the PXB6-MV/MN?
The PXB6-MV/MN is an accessory for a compatible breaker interface. Confirm the exact breaker family, mounting position and coordination requirements.
What should be checked during installation of the PXB6-MV/MN?
Check voltage, thresholds, wiring, breaker interface, enclosure conditions and the manufacturer's installation instructions. Testing must be performed by qualified personnel.
Confirm the Right PXB6-MV/MN Configuration
Share the required function, voltage, interface, quantity, destination market and technical documents. CHAC will review the request against the published accessory data.
