PXB6DC-63M DC Miniature Circuit Breaker
Características del producto
■ Breaking capacity up to 10 kA for reliable short-circuit protection.
■ Rated current range from 0.5 A to 63 A.
■ Available in 1P, 2P, 3P and 4P configurations.
■ Mechanical endurance over 10,000 operations.
Especificación de Pedido
Por favor, especifique lo siguiente al hacer un pedido:
1.Product Model: PXB6DC-63M
2. Número de polos: 1P, 2P, 3P, 4P
3.Corriente nominal y curva de disparo: [por ejemplo, 16A]
- Rated Current (In): 0.5, 1, 1.6, 2, 2.5, 3, 4, 5, 6,8, 10, 13, 16, 20, 25, 32, 40, 50, 63A
5.Cantidad: [ej. 100 piezas]
Ejemplo de pedido:
PXB6DC-63M 2P 16A 100 pcs
Especificaciones técnicas
| Parámetro | |
| Rated Voltage(V) | 1P DC 125V 2P DC 250V 3P DC 375V 4P DC 500V |
| Rated Current(A) | 0.5, 1, 1.6, 2, 2.5, 3, 4, 5, 6, 8, 10, 13, 16, 20, 25, 32, 40, 50, 63A |
| Rated Insulation Voltage(Ui) | 500V |
| Ultimate Breaking Capacity(Icu)(kA) | 10 |
| Service Breaking Capacity(Ics)(kA) | 7.5 |
| Número de polos | 1P, 2P, 3P, 4P |
| Resistencia Mecánica | Mayor o igual a 10000 |
| Resistencia eléctrica | ≥1500 |
| Capacidad de interrupción | ≤25mm² |
| Tightening Torque(N·m) | 2.5 |
| Clase de Protección | IP20 |
| Estándar | GB/T14048.2、IEC60947-2 |
| Certificación | CE·CB·CCC |DEKRA Certified |
Tripping Characteristics(Reference Temperature: 30°C)
| Artículo | Corriente de prueba (A) | Estado inicial | Límite de tiempo para disparar o no disparar | Resultado esperado | Observaciones |
| a | 1.05En | Frío | t ≤ 1 h | No desatascador | La corriente sube suavemente al valor especificado en 5s |
| b | 1.3En | Siguiendo el ítem una prueba | t<1h | Tropezando | |
| c | 2.55In | Frío | 1s<t<60s(In≤32A) 1s<t<120s(In>32A) |
Tropezando | |
| d | 4In、8In、12In 80% |
Frío | t≥0.2s | No desatascador | Circuito activado al cerrar un interruptor auxiliar. Verifica la capacidad de corte rápido. |
| e | 4In、8In、12In 120% |
Frío | t<0.2s | Tropezando |
Nota: El término “en frío” significa que la prueba se realiza a una temperatura de calibración de referencia sin carga antes de la prueba.
Designación del tipo

Curvas de disparo

Dimensiones(mm)













