Fabricante OEM de MCCB ajustable termomagnético CQM6RT

El CQM6RT MCCB provides adjustable overload and short-circuit protection within its published 32–1250A range. Specification should follow the system voltage, load, conductor coordination, prospective fault current and applicable rules—not the ampere value alone.

Polacos
3P / 4P
Corriente nominal:
32–1250A
Voltaje nominal
CA 400/415V
Viaje / Protección:
adjustable overload and short-circuit protection
Datos de última hora:
Clases C/S/M/H hasta 75kA, según el armazón y la configuración ordenada
Estándar
Referencias de la IEC/EN 60947 y GB/T 14048 que se enumeran en la página

Descripción del producto

CQM6RT is a thermal magnetic circuit breaker for AC 400/415V distribution and protection applications. Its published range covers 32–1250A with 3P / 4P options. Selection depends on the complete power-system design, including fault level, coordination, conductor ampacity, enclosure conditions and local rules.

The supplied product specification references IEC/EN 60947-1, IEC/EN 60947-2, IEC/EN 60947-3 and IEC/EN 60947-4, together with GB/T 14048.1, .2, .3 and .4. These standard references do not, by themselves, establish certification for a particular order.

Características clave

  • Field-Adjustable Settings: Allows for precise on-site customization of both overload (Ir) and short-circuit (Im) protection settings for optimized coordination.
  • Dual Protection Curves: Available with trip units optimized for either "Power Distribution" or "Motor Protection" applications.
  • Proven Robustness: Designed for reliable operation across a wide temperature range (-35°C to +70°C) and at high altitudes up to 2000m.
  • Accessory Compatibility: Supports a full range of accessories, including shunt releases and undervoltage trips, for extended control capabilities.
  • Published current range: 32–1250A.

Aplicaciones típicas

Typical applications include industrial feeders and motor circuits where field coordination requires adjustable trip settings. These are evaluation contexts rather than universal approvals. Confirm the exact frame, voltage, breaking duty, trip unit, accessories and installation method before specification.

Guía de Solicitudes y Selección

Use the verified CQM6RT values below to create a shortlist, then validate the complete circuit. An MCCB rating does not replace conductor calculations, fault-current analysis, coordination review or local installation requirements.

Punto de selección CQM6RT reference Lo que el proyecto debe confirmar
Corriente nominal 32–1250A Design current, conductor ampacity, installation method, temperature and grouping
Voltaje CA 400/415V Sistema de suministro y capacidad nominal de los equipos
Polacos 3P / 4P Live conductors and neutral treatment
Trip / protection adjustable thermal Ir and magnetic Im Load profile, fault response and coordination
Capacidad de corte Clases C/S/M/H hasta 75kA, según el armazón y la configuración ordenada Prospective short-circuit current at the installation point

Fixed vs Adjustable Protection

A fixed thermal-magnetic device can suit a stable design, while an adjustable trip unit may help coordination when the project study requires field settings.

Trip Coordination
Compare MCCB Options →

MCCB vs MCB

An MCCB is normally evaluated for higher current, fault duty or accessory flexibility; an MCB may be more suitable for compact final circuits.

Current & Fault Duty
Compare MCCB and MCB →

Icu vs Ics

The saved data for CQM6RT lists C/S/M/H classes up to 75kA, according to frame and ordered configuration. Match the declared duty to the prospective short-circuit current and continuity objective.

Short-Circuit Study
Review Technical Support →

Pole and Neutral Arrangement

Published pole options are 3P / 4P. Confirm which conductors must be switched, protected and isolated together.

System Arrangement
View MCCB Range →

Guía de pedidos

  1. State the exact model: CQM6RT.
  2. Provide frame and rated current within the published range: 32–1250A.
  3. Confirm poles: 3P / 4P.
  4. Specify the trip unit or protection function: adjustable thermal Ir and magnetic Im.
  5. Provide system voltage, frequency, application, expected fault level, destination market and quantity.
  6. List required accessories, terminals, documents and any approved OEM/ODM marking or packaging requirements.

Comprobaciones de Instalación y Coordinación

  • Use the exact model drawing and instructions; do not infer terminal positions, supply direction or accessory compatibility from another MCCB.
  • Verify conductor material and cross-section against the circuit calculation, terminal data, temperature and grouping.
  • Confirm Icu/Ics or DC fault duty, upstream/downstream coordination, enclosure conditions, altitude and clearances.
  • Installation, isolation, testing and maintenance must be performed by qualified personnel under applicable rules.

Guía de selección

CHAC CQM6RT MCCB - Selection Guide

Código de producto ① Grado de marco de carcasa ② Shell frame grade ③ Breaking capacity ④
CQM6 RT 160 C
Disjuntor de carcasa moldeada RT stands for thermomagnetic ally adjustable
T、A stands for single adjustable (i.e.,thermally adjustable/magnetically fixed).
C S M H
160 160 25/18 35/25 50/35 /
250 250 25/18 35/25 50/35 /
400 400 / 35/25 50/35 75/50
630 630 / 35/25 50/35 75/50
800 800 / 35/25 50/35 75/50
1250 1250 / 35/25 50/35 75/50
Operating method⑤ Number of poles⑥ Trip Unit &Accessories⑦ Corriente nominal A
P 4 300 125A
Funcionamiento motorizado
Z:Turn the handle
W: Operación directa
DElectric operation
DC1 DC 2,DC3
160A:3P,4P
250A:3P,4P
400A:3P,4P
630A:3P,4P
800A:3P,4P
1250A:3P,4P
El primer dígito indica el tipo de retén
2: Retén instantáneo solamente
3:Duplicate detent
Note:The last two digits are the accessory designator(see accessory table).
160 32,40,50,63,80,100,125,140,160
250 100,125,140,160,180,200,225,250
400 250,315,350,400
630 250,315,350,400,500,630
800 500,630,700,800
1250 800,1000,1250
Application⑧ Optional code for Level 4 products⑨ Special code⑩
2 A I
1: Para la distribución de energía A:N-pole unprotected,not combinable A I:Overload alarm non trip function
Para la protección del motor B:N-pole unprotected,combinable
Accessory Voltage ⑪ Motorized operating voltage ⑫ Installation ⑬ Terminal Block Option ⑭
Q1 D1 Q 2
Undervoltage detent UVT
Q1: CA220V
Q2: AC240V
Q3: AC380V
Q4: AC415V
Shunt release Shunt
F1: AC220V
F2: AC380V
F3: DC110V
F4: DC24V
Auxiliary alarm Auxiliary
J1: AC125V
J2: AC250V
J3: DC125V
J4: DC24V
CD1
D1:AC220V
D2:AC230V
D3:AC380V
D4:AC400V
CD2
D5: AC230V
D6: AC110V
D7:DC220V
D8:DC110V
D9:AC110~240V
D10:DC100~220V
Q: Frente de la placa
H: Cuatro lados de la placa
C:Insertado
1:No installation 2:Installation
Nota: Cuando se seleccione la operación con motor, consulte los accesorios externos para conocer las dos tensiones aplicables a esta operación.

Lista de accesorios

CHAC CQM6RT MCCB - Accessory List
CHAC CQM6RT MCCB - Accessory List

CHAC offers a right-side auxiliary switch, a left-side shunt release and a left-side undervoltage release.

For accessory codes 220, 320, 240, 340, 270 and 370, specify the required auxiliary contact arrangement when ordering.

Parámetros técnicos principales

Número de modelo CQM6RT-160 CQM6RT-250
Corriente nominal en el nivel de la trama Inm(A) 160 250
Número de polos 3,4 3,4
Rated current In(A),at 40°C,50°C,55°C 32,40,50,63,80,100,125,140,160 100,125,140,160,180,200,225,250
Tensión de funcionamiento nominal Ue(V), CA 50/60Hz 400/415 400/415
Tensión de aislamiento nominal Ui (V) 800 800
Tensión de resistencia a la impulsión nominal Uimp(KV) 8 8
Designación de la capacidad de ruptura C S M C S M
Capacidad de desconexión por cortocircuito Icu/Ics (kA) AC400/415V 25/18 35/25 50/35 25/18 35/25 50/35
Categoría de selectividad A A A A A A
Number of operating cycles ON
(cycle)
ENCENDIDO 6000 6000
DESACTIVADO 10000 10000
Mecanismos de viaje y tipos de protección Viaje magnético Protección de la distribución de energía ● ● ● ● ● ●
Protección del motor ● ● ● ● ● ●
Desconexión térmica-magnética Protección de la distribución de energía ● ● ● ● ● ●
Protección del motor ● ● ● ● ● ●
Accesorios Controles auxiliares ● ● ● ● ● ●
Controles de alarma ● ● ● ● ● ●
Desconexión del derivado ● ● ● ● ● ●
Dispositivo de protección contra subvoltaje ● ● ● ● ● ●
Mecanismo de operación manual ● ● ● ● ● ●
Mecanismo de operación motorizado ● ● ● ● ● ●
Conexión de la placa trasera ● ● ● ● ● ●
Insertado ● ● ● ● ● ●
Placa de acoplamiento ● ● ● ● ● ●
División entre fases ● ● ● ● ● ●
Productos derivados Dedicados a los contadores de electricidad con pago anticipado ● ● ● ● ● ●
Alarma de sobrecarga sin tripulación ● ● ● ● ● ●
Dimensiones totales (mm) (a-b-c-ca) CHAC CQM6RT MCCB outline dimension reference a b c and ca 3 P 90×155×71×95 90×155 ×85×109 105×165×71×96 105×165 ×93×119
4 P 120×155×71×95 120×155 ×85×109 140×165×71×96 140×165 ×93×119

Note: ● indicates an available optional accessory; – indicates that the accessory is not available.

Número de modelo CQM6RT-400 CQM6RT-630
Corriente nominal en el nivel de la trama Inm(A) 400 630
Número de polos 3,4 3,4
Rated current In(A),at 40°C,50°C,55°C 250,315,350,400 250,315,350,400,630
Tensión de funcionamiento nominal Ue(V), CA 50/60Hz 400/415 400/415
Tensión de aislamiento nominal Ui (V) 800 800
Tensión de resistencia a la impulsión nominal Uimp(KV) 8 8
Designación de la capacidad de ruptura S M H S M H
Capacidad de desconexión por cortocircuito Icu/Ics (kA) AC400/415V 35/25 50/35 75/50 35/25 50/35 75/50
Categoría de selectividad A A A A A A
Number of operating cycles
(cycle)
ENCENDIDO 3000 3000
DESACTIVADO 8000 8000
Mecanismos de viaje y tipos de protección Viaje magnético Protección de la distribución de energía ● ● ● ● ● ●
Protección del motor ● ● ● ● ● ●
Desconexión térmica-magnética Protección de la distribución de energía ● ● ● ● ● ●
Protección del motor ● ● ● ● ● ●
Accesorios Controles auxiliares ● ● ● ● ● ●
Controles de alarma ● ● ● ● ● ●
Desconexión del derivado ● ● ● ● ● ●
Dispositivo de protección contra subvoltaje ● ● ● ● ● ●
Mecanismo de operación manual ● ● ● ● ● ●
Mecanismo de operación motorizado ● ● ● ● ● ●
Conexión de la placa trasera ● ● ● ● ● ●
Insertado ● ● ● ● ● ●
Placa de acoplamiento ● ● ● ● ● ●
División entre fases ● ● ● ● ● ●
Productos derivados Dedicados a los contadores de electricidad con pago anticipado ● ● ● ● ● ●
Alarma de sobrecarga sin tripulación ● ● ● ● ● ●
Dimensiones totales (mm) (a-b-c-ca) CHAC CQM6RT MCCB outline dimension reference a b c and ca 3 P 140×257×108×156 140×257×108×156
4 P 185×257×108×156 185×257×108×156

Note: ● indicates an available optional accessory; – indicates that the accessory is not available.

Número de modelo CQM6RT-800 CQM6RT-1250
Corriente nominal en el nivel de la trama Inm(A) 800 1250
Número de polos 3,4 3,4
Rated current In(A),at 40°C,50°C,55°C 500,630,700,800 800,1000,1250
Tensión de funcionamiento nominal Ue(V), CA 50/60Hz 400/415 400/415
Tensión de aislamiento nominal Ui (V) 800 800
Tensión de resistencia a la impulsión nominal Uimp(KV) 8 8
Designación de la capacidad de ruptura S M H S M H
Capacidad de desconexión por cortocircuito Icu/Ics (kA) AC400/415V 35/25 50/35 75/50 35/25 50/35 75/50
Categoría de selectividad A A A A A A
Number of operating cycles
(cycle)
ENCENDIDO 1000 1000
DESACTIVADO 3000 3000
Mecanismos de viaje y tipos de protección Viaje magnético Protección de la distribución de energía ● ● ● ● ● ●
Protección del motor ● ● ● ● ● ●
Desconexión térmica-magnética Protección de la distribución de energía ● ● ● ● ● ●
Protección del motor ● ● ● ● ● ●
Accesorios Controles auxiliares ● ● ● ● ● ●
Controles de alarma ● ● ● ● ● ●
Desconexión del derivado ● ● ● ● ● ●
Dispositivo de protección contra subvoltaje ● ● ● ● ● ●
Mecanismo de operación manual ● ● ● ● ● ●
Mecanismo de operación motorizado ● ● ● ● ● ●
Conexión de la placa trasera ● ● ● – – –
Insertado ● ● ● – – –
Placa de acoplamiento ● ● ● ● ● ●
División entre fases ● ● ● ● ● ●
Productos derivados Dedicados a los contadores de electricidad con pago anticipado ● ● ● ● ● ●
Alarma de sobrecarga sin tripulación ● ● ● ● ● ●
Dimensiones totales (mm) (a-b-c-ca) CHAC CQM6RT MCCB outline dimension reference a b c and ca 3 P 210×275×114×163 210×275×114×163
4 P 280×275×114×163 280×275×114×163

Note: ● indicates an available optional accessory; – indicates that the accessory is not available.

Características de Operación

The following table gives the inverse-time operating characteristics for distribution protection with all poles energised at an ambient temperature of +40°C, without humidity compensation.

Testar la designación actual Configuración de múltiples valores actuales Tiempo convencional Estado inicial
In≤63 In > 63
Corriente convencional sin oscilación 1.05 ≥1h ≥2h Un estado genial
Corriente de disparo convencional 1.30 <1h<2h Estado caliente

The following table gives the inverse-time operating characteristics for motor protection with all poles energised at an ambient temperature of +40°C, without humidity compensation.

Testar la designación actual Configuración de múltiples valores actuales Tiempo convencional Estado inicial
En ≤800
Corriente convencional sin oscilación 1.0 ≥2 horas Un estado genial
Corriente de disparo convencional 1.2 <2h Estado caliente

The operating-characteristics reference gives an instantaneous trip current setting of 10In for distribution protection. Confirm the applicable trip-unit setting for the ordered configuration.

The operating-characteristics reference gives an instantaneous trip current setting of 12In for motor protection.

The stated accuracy of the instantaneous trip current setting is 20% of the setting value.

CQM6RT-160 Operating Characteristic Curve

CHAC CQM6RT MCCB - CQM6RT-160 Operating Characteristic Curve

CQM6RT-250 Operating Characteristic Curve

CHAC CQM6RT MCCB - CQM6RT-250 Operating Characteristic Curve

CQM6RT-400 / 630 Operating Characteristic Curve

CHAC CQM6RT MCCB - CQM6RT-400 / 630 Operating Characteristic Curve

CQM6RT-800 Operating Characteristic Curve

CHAC CQM6RT MCCB - CQM6RT-800 Operating Characteristic Curve

CQM6RT-1250 Operating Characteristic Curve

CHAC CQM6RT MCCB - CQM6RT-1250 Operating Characteristic Curve

Outline and Installation Dimensions(mm)

CHAC CQM6RT MCCB - Outline and Installation Dimensions(mm)

Disjuntor de carcasa moldeada Dimensiones totales Installation dimensions Boit
A A1 A2 A3 B B1 B2 B3 B5 B6 H H1 H2 H3 H4 H5 H6 A4 B4
3P 4P 3P 4P 3P 4P 3P 4P
CQM6RT-160CS 90 120 60 90 – – – – 155 134 103 50 48 – 95 76 2.2 70.7 62.3 23.8 24.6 30 132 M8
CQM6RT-160M 90 120 60 90 – – – – 155 134 103 50 48 – 109.2 90 2.2 84.9 76.4 23.1 24.9 30 132 M8
CQM6RT-250CS 105 140 70 105 – – – – 165 144 102 50 97 – 95.8 75 2.8 71 62.2 22.7 23.3 35 126 M8
CQM6RT-250M 105 140 70 105 – – – – 165 144 102 50 95 – 118.6 97.6 2.8 93.4 84.5 23.1 23.2 35 126 M8
CQM6RT-400 140 185 88 132 140 196 112 168 257 230 179 90 103 42 156 112.1 3.5 107.5 99.6 30.9 32 44 194 M10
CQM6RT-630 SMH 400A 140 185 88 132 140 196 112 168 257 230 179 90 103 42 156 112.1 3.5 107.5 99.6 30.9 34 44 194 M10
CQM6RT-630 SMH 630A 140 185 88 132 140 196 112 168 257 230 179 90 103 42 156 112.1 3.5 107.5 99.6 33.4 30.7 44 194 M10
CQM6RT-800 SMH 630A 210 280 140 210 180 250 140 210 275 243 192 90 103 87 162.5 118.4 2.7 114.3 106 28.5 32.7 70 242.5 M12
CQM6RT-800 SMH 800A 210 280 140 210 180 250 140 210 275 243 192 90 103 87 162.5 118.4 2.7 114.3 106 29.5 34.7 70 242.5 M12
CQM6RT-1250 SMH 210 280 140 210 180 250 140 210 275 243 192 90 103 87 162.5 118.4 2.7 114.3 106 31.5 32 70 242.5 M10

¿Por qué elegir CHAC?

Con más de 30 años de experiencia en fabricación, más de 1100 empleados, más de 100 millones de postes
Con una capacidad anual y un proceso de producción automatizado 90%, CHAC ofrece una capacidad de producción estable y un estricto
control de calidad para clientes OEM/ODM globales. Nuestro sistema de fabricación interno respalda a largo plazo
Cooperación para marcas eléctricas, importadores y distribuidores.

Imágenes del producto del disyuntor de circuito de aire Cqw2 Series
30+

AÑOS DE EXPERIENCIA

Especializado en fabricación eléctrica de bajo voltaje

Imágenes del producto del disyuntor de circuito de aire Cqw2 Series
1100+

EMPLEADOS

Equipo profesional garantiza calidad y entrega estables

Imágenes del producto del disyuntor de circuito de aire Cqw2 Series
100M+

CAPACIDAD ANUAL DE LOS POLOS

Capacidad de producción a gran escala para satisfacer la demanda mundial

Imágenes del producto del disyuntor de circuito de aire Cqw2 Series
90%

PRODUCCIÓN AUTOMATIZADA

Automatización avanzada para alta eficiencia y consistencia

Imágenes del producto de CQM6RT Thermal-Magnetic Adjustable MCCB OEM Manufacturer

Línea de ensamblaje automatizada

Imágenes del producto de CQM6RT Thermal-Magnetic Adjustable MCCB OEM Manufacturer

Laboratorio de pruebas

Imágenes del producto de CQM6RT Thermal-Magnetic Adjustable MCCB OEM Manufacturer

Inyección y Estampado

Imágenes del producto de CQM6RT Thermal-Magnetic Adjustable MCCB OEM Manufacturer

Inspección de calidad

Imágenes del producto de CQM6RT Thermal-Magnetic Adjustable MCCB OEM Manufacturer
Imágenes del producto de CQM6RT Thermal-Magnetic Adjustable MCCB OEM Manufacturer
Imágenes del producto de CQM6RT Thermal-Magnetic Adjustable MCCB OEM Manufacturer
Imágenes del producto de CQM6RT Thermal-Magnetic Adjustable MCCB OEM Manufacturer
Imágenes del producto de CQM6RT Thermal-Magnetic Adjustable MCCB OEM Manufacturer

Un estricto sistema de control de calidad garantiza que cada producto cumpla con los estándares mundiales.

¿Qué podemos personalizar?

For CQM6RT projects, CHAC can review private-label marking, packaging, approved appearance options, published 32–1250A electrical configurations and technical-document requirements. Requests outside the published range are subject to engineering evaluation, testing, minimum order quantity and project feasibility.

Imágenes del producto de CQM6RT Thermal-Magnetic Adjustable MCCB OEM Manufacturer

Recinto
Diseño

Tamaños, estructuras y detalles de instalación de recintos personalizados.

Imágenes del producto de CQM6RT Thermal-Magnetic Adjustable MCCB OEM Manufacturer
Imágenes del producto de CQM6RT Thermal-Magnetic Adjustable MCCB OEM Manufacturer

Interno
Configuración

Opciones flexibles de diseño interno y disposición de componentes.

Imágenes del producto de CQM6RT Thermal-Magnetic Adjustable MCCB OEM Manufacturer
Imágenes del producto de CQM6RT Thermal-Magnetic Adjustable MCCB OEM Manufacturer

Marca e
Logo

Logotipos de marca propia, placas de identificación e identificación de marca.

Imágenes del producto de CQM6RT Thermal-Magnetic Adjustable MCCB OEM Manufacturer
Imágenes del producto de CQM6RT Thermal-Magnetic Adjustable MCCB OEM Manufacturer

Empaquetado
Diseño

Soluciones de embalaje, cajas personalizadas, etiquetas y manuales.

Imágenes del producto de CQM6RT Thermal-Magnetic Adjustable MCCB OEM Manufacturer
Imágenes del producto de CQM6RT Thermal-Magnetic Adjustable MCCB OEM Manufacturer

Eléctrico
Configuración

Instalación eléctrica adaptada a los requisitos de la aplicación.

Imágenes del producto de CQM6RT Thermal-Magnetic Adjustable MCCB OEM Manufacturer
Imágenes del producto de CQM6RT Thermal-Magnetic Adjustable MCCB OEM Manufacturer

Certificación
Apoyo

Soporte para estándares del mercado objetivo y requisitos de cumplimiento.

Imágenes del producto de CQM6RT Thermal-Magnetic Adjustable MCCB OEM Manufacturer

Descargar

PDF

Interruptor automático de caja moldeada serie CQM6

Descripción general completa de componentes eléctricos de bajo voltaje y referencia para la selección de productos.

Descargar PDF

Arriba

¿Necesita documentos técnicos?

Contáctenos para obtener hojas de datos, certificados, planos, orientación de selección o soporte para proyectos OEM/ODM.

Contáctanos

CQM6RT Product FAQ

What is the CQM6RT MCCB used for?

The CQM6RT is specified for adjustable overload and short-circuit protection in AC 400/415V systems within the published 32–1250A range. Suitability depends on the fault study, conductor coordination, enclosure and local rules.

How does the CQM6RT molded case circuit breaker work?

The protection mechanism responds to the fault conditions stated for this model: adjustable overload and short-circuit protection. Trip behaviour, settings and interruption duty must be checked against the ordered frame and product instructions.

How do I choose the CQM6RT rated current and poles?

Start with the design current and conductor calculation, then choose a published current within 32–1250A and poles from 3P / 4P. Neutral treatment, fault level, ambient conditions and coordination also need review.

What breaking capacity should I check on the CQM6RT?

Use the declared C/S/M/H classes up to 75kA, according to frame and ordered configuration for the exact frame, voltage and configuration. The prospective short-circuit current at the installation point must be within the applicable duty; a larger ampere value alone is not a selection rule.

Can the CQM6RT replace an MCB or an earth-leakage device?

An MCCB is not automatically a like-for-like replacement. The CQM6RT provides adjustable overload and short-circuit protection; residual-current protection, DC interruption, adjustable settings and other functions must be confirmed separately from the project requirement.

How should the CQM6RT be installed and tested?

Use only the exact model drawing, terminal identification and accessory instructions. A qualified person should verify isolation, conductor size, torque, clearances, settings, fault duty and functional tests before energising the circuit.

Confirm the Right CQM6RT Configuration

Send the frame, rated current, poles, protection function, system voltage, expected fault level, destination market and quantity. CHAC will review the request against the published model range.

Solicitar un presupuesto