PXL6-100 Brettina elettromagnetica a corrente residua
L'interruttore differenziale elettromagnetico CHAC PXL6-100 offre protezione contro le correnti di guasto a terra con opzioni di tipo AC o tipo A e correnti nominali da 10A a 100A. Adatta la sensibilità e la disposizione dei poli al circuito e assicura una protezione coordinata dai sovracorrenti per l'impianto.
Riassunto del prodotto
Il CHAC PXL6-100 electromagnetic RCCB provides Type AC or Type A residual-current protection with rated currents from 10A to 100A. It is selected alongside a suitable overcurrent protective device; its conditional short-circuit rating is not a standalone circuit-breaker interruption rating.
Per importatori, distributori e produttori di apparecchiature, CHAC può verificare la configurazione richiesta rispetto ai requisiti del circuito e alla documentazione del mercato di destinazione. Concordare il modello esatto, i disegni e i requisiti di marcatura prima dell’approvazione del campione o di un ordine ripetuto.
Punti chiave di selezione
Applicazioni tipiche
Consider PXL6-100 for Protezione contro i flussi residui in AC distribution assemblies. Check whether group-level protection or individual RCBO protection best fits the circuit layout and continuity needs, then coordinate the chosen arrangement with the upstream and downstream protective devices.
Modulazioni e Guida alla selezione
| Elemento selezionabile | PXL6-100 configuration | Cosa verificare |
|---|---|---|
| Funzione di protezione | Type AC or Type A RCCB | Provide separate coordinated overload and short-circuit protection. |
| Corrente nominale | 10–100A | This is a carrying-current rating, not an overload-trip setting. |
| Voltage and poles | 230V AC: 1P+N; 400V AC: 3P / 3P+N | Confirm the circuit arrangement and neutral requirements. |
| Fault coordination | Rated conditional short-circuit current 6000A | Verify the specified backup protective device and coordination conditions. |
Use these checks to compare the protection function, configuration and related CHAC products before specifying PXL6-100. Related products are selection alternatives or system components, not automatic replacements.
Coordinate the RCCB with overcurrent protection
The RCCB responds to residual-current imbalance.
Specify sensitivity independently from carrying current
A 100A RCCB designation and a 30mA sensitivity describe different properties.
Compare PXL6-100B for the required function
L'interruttore differenziale elettromagnetico RCCB CHAC PXL6-100B offre protezione da corrente residua di tipo B per circuiti in corrente alternata, con correnti nominali da 10A a 100A. Selezionare la sensibilità e la disposizione dei poli per il circuito e coordinare la protezione separata da sovracorrente con il valore dichiarato di potere di interruzione nominale in condizioni specifiche.
Confronta PXB6LE-63 per la funzione richiesta
L’RCBO elettronico CHAC PXB6LE-63 combina la protezione da sovraccarico, cortocircuito e corrente residua in un unico dispositivo. Scegli tra quattro configurazioni polari, curve B/C/D e sensibilità di tipo AC/A per adattarlo al circuito, con correnti nominali da 6A a 63A.
Need Help Specifying PXL6-100?
Invia i requisiti del circuito, la configurazione selezionata, il mercato di destinazione e la quantità per una verifica specifica del modello.
Coordinate the RCCB with overcurrent protection
The RCCB responds to residual-current imbalance. A load overload does not necessarily create that imbalance, so the circuit still needs appropriate overcurrent protection. Check the backup device and conditional short-circuit rating as an assembly.
Specify sensitivity independently from carrying current
A 100A RCCB designation and a 30mA sensitivity describe different properties. State both when ordering. Confirm the exact sensitivity variant and its operating-time documentation, especially if selecting a less common sensitivity or substituting a prior device.
How to Specify a PXL6-100 Order
Utilizzare i dettagli di configurazione riportati di seguito nella specifica d’acquisto. Conservare la revisione approvata del disegno e l’identificazione del prodotto insieme all’ordine, in modo da poter verificare in modo coerente le consegne ripetute.
| Dettaglio dell'ordine | Informazioni da includere |
|---|---|
| Funzione di protezione | Type AC or Type A RCCB — Provide separate coordinated overload and short-circuit protection. |
| Corrente nominale | 10–100A — This is a carrying-current rating, not an overload-trip setting. |
| Voltage and poles | 230V AC: 1P+N; 400V AC: 3P / 3P+N — Confirm the circuit arrangement and neutral requirements. |
| Fault coordination | Rated conditional short-circuit current 6000A — Verify the specified backup protective device and coordination conditions. |
| Progetto e documenti | Fornire i requisiti documentali relativi all’applicazione, alle condizioni di installazione e al mercato di destinazione. |
| Quantità e identificazione | Indicare la quantità, i requisiti relativi ai campioni, la lingua dell’imballaggio e qualsiasi proposta di marchio; verificare la fattibilità prima dell’approvazione. |
Verificare la corretta installazione prima dell'approvazione.
Specifiche tecniche
| Parametro | |
| Rated Voltage | 230V AC(1P+N); 400V AC(3P、3P+N) |
| Corrente nominale (A) | 10A、16A、20A、25A、32A、40A、50A、63A、80A、100A |
| Rated Residual Operating Current | 10mA(10A~40A), 30mA, 100mA, 400mA |
| Rated Residual Non-Operating Current | 0.5IΔn |
| Type of Residual Current (with DC component) | AC type、A type |
| Numero di polacchi | 1P+N、3P、3P+N |
| Rated Conditional Short-Circuit Current | 6000A |
| Rated Conditional Residual Short-Circuit Current | 6000A |
| Rated Making and Breaking Capacity | 630A(In≤63A); 10In(In>63A) |
| Rated Residual Making and Breaking Capacity | 630A(In≤63A); 10In(In>63A) |
| Tightening Torque | (2.5～3.0)N·m |
| Classe di protezione | IP20 |
| Livello di inquinamento | 2 |
| Installation Category | Ⅱ |
| Standard | GB 16916.1, IEC61008-1 |
| Certificazione | CE CB CCC|DEKRA Certified |
Operating time (for residual current devices)
| In (A) | IΔn (A) | Breaking time when the residual current equals the following values(s) | ||||
| IΔn | 2IΔn | 5IΔn | 5A、10A、20A、50A、100A、200A | IΔt | ||
| 10～100A | 0.03、0.01、0.1、0.3 | 0.3 | 0.15 | 0.04 | 0.04 | 0.04 |
Mechanical endurance&Electrical endurance
| In (A) | Number of operating cycles | Operating frequency (cycles per hour) | |
| Number of on-load operating cycles | Number of no-load operating cycles | ||
| 10～25A | 2000 | 2000 | 240 |
| 32A～100A | 2000 | 1000 | 120 |
Designazione del tipo
Dimensioni (mm)
Perché scegliere CHAC
CHAC Electric supplies electrical protection and control products for importers, distributors and equipment brands. For PXL6-100, agree the configuration, technical documents, approved sample and identification requirements before production. The company facilities shown below provide company context, not a claim that every model uses the same production or test process.
01
CONFIRM THE SPECIFICATION
Agree the PXL6-100 configuration, circuit duty and installation requirements.
02
REVIEW THE DOCUMENTS
Confirm model-specific drawings and destination-market requirements.
03
APPROVE THE SAMPLE
Record the accepted configuration and marking requirements.
04
DEFINE ORDER CHECKS
Agree packaging, identification and delivery requirements in the quotation.
Linea di assemblaggio automatizzata
Laboratorio di test
Iniezione e stampaggio
Ispezione di qualità
Cosa possiamo personalizzare?
Discuss PXL6-100 product identification, packaging and documentation with CHAC. Each proposed change is subject to technical feasibility, marking rules and approval of the exact order; no altered rating or certification is implied.
Logo e branding
Submit logo artwork and marking requirements for review against the available print area and mandatory product markings.
Packaging & Manuals
Define carton labels, packaging language, product identification and instruction requirements for the destination market.
Configuration Selection
Specify PXL6-100 with the required protection function, operating conditions and protection duty. Confirm the complete order combination.
Assembly Requirements
Provide the mounting and connection requirements for review. Changes to the housing, terminals or operating arrangement require engineering approval.
Market Documentation
Request documents covering the exact PXL6-100 model and destination market. A standard reference alone is not evidence of certification.
Sample Approval
Agree the sample specification, drawing revision and acceptance criteria before confirming a production order.
Technical Documents and Support
PXL6-100 Technical Documents
Request the PXL6-100 datasheet, configuration drawing, installation instructions and available model-specific market documents.Request Datasheet
Necessita di documenti tecnici?
Send the application, electrical requirements, assembly layout and destination market for configuration and document review.Contattaci
PXL6-100 Product FAQ
Does an RCCB protect against overload?
An RCCB does not provide integral overload protection. PXL6-100 must be coordinated with a suitable fuse or circuit breaker. Its rated current describes the permitted carrying-current duty under the specified conditions.
What is the difference between an RCCB and an RCBO?
An RCCB provides residual-current protection without integral overcurrent protection; an RCBO combines both functions. Choose PXL6-100 for a coordinated RCCB arrangement or evaluate an appropriate RCBO where integrated branch protection is required.
Does the 6000A rating mean PXL6-100 breaks short circuits on its own?
No. The PXL6-100 table identifies a conditional short-circuit current. Confirm the associated protective device and coordination conditions; do not advertise it as an independent 6kA MCB or RCBO.
How should I choose the PXL6-100 residual-current sensitivity?
Select the mA rating from the circuit purpose, equipment instructions and local requirements. Rated current in amperes is a separate specification. Confirm the exact PXL6-100 sensitivity variant and its operating-time data rather than using a larger threshold to mask recurring trips.
Why can a PXL6-100 installation trip repeatedly?
Possible causes include insulation faults, accumulated equipment leakage, incorrect neutral connections or an unsuitable protection type. Have a qualified person investigate the circuit and follow the device test instructions before changing the rating or replacing protection.
What should an importer include in a PXL6-100 inquiry?
Specify poles, AC supply, rated current, residual-current type and sensitivity, plus the overcurrent curve if ordering an RCBO. Add the destination market, required documents, quantity and marking requirements so the quotation identifies the exact configuration.
Specify the Right PXL6-100 Configuration
Send CHAC your required configuration, application, destination market and estimated quantity. We will review the requested specification and provide the relevant technical documents and commercial proposal.
