PXL6-100 Disjoncteur à courant résiduel électromagnétique
Le disjoncteur différentiel électromagnétique CHAC PXL6-100 offre une protection contre les courants résiduels avec des options de type AC ou type A et des courants nominaux allant de 10A à 100A. Adaptez la sensibilité et la disposition des pôles au circuit, et assurez une protection coordonnée contre les surintensités pour l’installation.
Vue d'ensemble du produit
Le CHAC PXL6-100 electromagnetic RCCB provides Type AC or Type A residual-current protection with rated currents from 10A to 100A. It is selected alongside a suitable overcurrent protective device; its conditional short-circuit rating is not a standalone circuit-breaker interruption rating.
Pour les importateurs, les distributeurs et les fabricants d’équipements, CHAC peut vérifier la configuration demandée au regard des exigences du circuit électrique et des documents propres au marché de destination. Convenez du modèle exact, des schémas et des exigences de marquage avant l’approbation des échantillons ou la passation d’une commande répétée.
Points clés de sélection
Applications typiques
Consider PXL6-100 for Protection contre le courant résiduel in AC distribution assemblies. Check whether group-level protection or individual RCBO protection best fits the circuit layout and continuity needs, then coordinate the chosen arrangement with the upstream and downstream protective devices.
Demandes d’admission et guide de sélection
| Article sélectionné | PXL6-100 configuration | Qu'est-ce que l'on doit vérifier ? |
|---|---|---|
| Fonction de protection | Type AC or Type A RCCB | Provide separate coordinated overload and short-circuit protection. |
| Courant nominal | 10–100A | This is a carrying-current rating, not an overload-trip setting. |
| Voltage and poles | 230V AC: 1P+N; 400V AC: 3P / 3P+N | Confirm the circuit arrangement and neutral requirements. |
| Fault coordination | Rated conditional short-circuit current 6000A | Verify the specified backup protective device and coordination conditions. |
Use these checks to compare the protection function, configuration and related CHAC products before specifying PXL6-100. Related products are selection alternatives or system components, not automatic replacements.
Coordinate the RCCB with overcurrent protection
The RCCB responds to residual-current imbalance.
Specify sensitivity independently from carrying current
A 100A RCCB designation and a 30mA sensitivity describe different properties.
Compare PXL6-100B for the required function
The CHAC PXL6-100B electromagnetic RCCB provides Type B residual-current protection for AC circuits, with rated currents from 10A to 100A. Select the sensitivity and pole arrangement for the circuit, and coordinate separate overcurrent protection with the published conditional short-circuit rating.
Compare PXB6LE-63 for the required function
Le CHAC PXB6LE-63 électronique de protection contre les surtensions, les courts-circuits et les courants résiduels combine en un seul appareil les fonctions de protection contre les surtensions, les courts-circuits et les courants résiduels. Choisissez parmi quatre configurations de broches, des courbes B/C/D et des sensibilités Type AC/A pour adapter la protection au circuit, avec des courants nominals allant de 6 A à 63 A.
Need Help Specifying PXL6-100?
Veuillez transmettre les spécifications du circuit, la configuration sélectionnée, le marché cible et la quantité souhaitée afin d’effectuer une analyse spécifique au modèle.
Coordinate the RCCB with overcurrent protection
The RCCB responds to residual-current imbalance. A load overload does not necessarily create that imbalance, so the circuit still needs appropriate overcurrent protection. Check the backup device and conditional short-circuit rating as an assembly.
Specify sensitivity independently from carrying current
A 100A RCCB designation and a 30mA sensitivity describe different properties. State both when ordering. Confirm the exact sensitivity variant and its operating-time documentation, especially if selecting a less common sensitivity or substituting a prior device.
How to Specify a PXL6-100 Order
Utilisez les détails de configuration ci-dessous dans la spécification d’achat. Conservez la révision approuvée du dessin et l’identification du produit avec la commande afin que les livraisons ultérieures puissent être contrôlées de manière cohérente.
| Détail de la commande | Informations à inclure |
|---|---|
| Fonction de protection | Type AC or Type A RCCB — Provide separate coordinated overload and short-circuit protection. |
| Courant nominal | 10–100A — This is a carrying-current rating, not an overload-trip setting. |
| Voltage and poles | 230V AC: 1P+N; 400V AC: 3P / 3P+N — Confirm the circuit arrangement and neutral requirements. |
| Fault coordination | Rated conditional short-circuit current 6000A — Verify the specified backup protective device and coordination conditions. |
| Projet et documents | Fournissez les exigences documentaires relatives à l’application, aux conditions d’installation et au marché de destination. |
| Quantité et identification | Précisez la quantité, les exigences relatives aux échantillons, la langue d’emballage et toute proposition de marque ; confirmez la faisabilité avant approbation. |
Vérifiez l’ajustement de l’installation avant approbation
Caractéristiques techniques
| Paramètre | |
| Tension nominale | 230V AC(1P+N); 400V AC(3P、3P+N) |
| Courant nominal (A) | 10A、16A、20A、25A、32A、40A、50A、63A、80A、100A |
| Courant résiduel opérationnel assigné | 10mA(10A~40A), 30mA, 100mA, 400mA |
| Courant résiduel assigné de non-fonctionnement | 0.5IΔn |
| Type de courant résiduel (avec composante continue) | AC type、A type |
| Nombre de Polonais | 1P+N、3P、3P+N |
| Courant de court-circuit assigné conditionnel | 6000A |
| Courant de court-circuit résiduel conditionnel assigné | 6000A |
| Capacité nominale de fermeture et de coupure | 630A(In≤63A); 10In(In>63A) |
| Capacité nominale de fermeture et de coupure en charge résiduelle | 630A(In≤63A); 10In(In>63A) |
| Couple de serrage | (2.5～3.0)N·m |
| Classe de protection | IP20 |
| Degré de pollution | 2 |
| Catégorie d'installation | Ⅱ |
| Normes | GB 16916.1, IEC61008-1 |
| Certification | CE CB CCC|Certifié DEKRA |
Temps de fonctionnement (pour les dispositifs à courant résiduel)
| Dans (A) | IΔn (A) | Découpage lorsque le courant résiduel atteint les valeurs suivantes | ||||
| Je ne sais pas | 2IΔn | 5IΔn | 5A, 10A, 20A, 50A, 100A, 200A | IΔt | ||
| 10～100A | 0.03、0.01、0.1、0.3 | 0.3 | 0.15 | 0.04 | 0.04 | 0.04 |
Endurance mécanique et endurance électrique
| Dans (A) | Nombre de cycles de fonctionnement | Operating frequency (cycles per hour) | |
| Number of on-load operating cycles | Number of no-load operating cycles | ||
| 10～25A | 2000 | 2000 | 240 |
| 32A～100A | 2000 | 1000 | 120 |
Designation de type
Dimensions (mm)
Pourquoi choisir CHAC
CHAC Electric supplies electrical protection and control products for importers, distributors and equipment brands. For PXL6-100, agree the configuration, technical documents, approved sample and identification requirements before production. The company facilities shown below provide company context, not a claim that every model uses the same production or test process.
01
CONFIRM THE SPECIFICATION
Agree the PXL6-100 configuration, circuit duty and installation requirements.
02
REVIEW THE DOCUMENTS
Confirm model-specific drawings and destination-market requirements.
03
APPROVE THE SAMPLE
Record the accepted configuration and marking requirements.
04
DEFINE ORDER CHECKS
Agree packaging, identification and delivery requirements in the quotation.
Ligne de montage automatisée
Laboratoire d'essai
Injection et estampage
Inspection de qualité
Qu'est-ce que nous pouvons personnaliser ?
Discuss PXL6-100 product identification, packaging and documentation with CHAC. Each proposed change is subject to technical feasibility, marking rules and approval of the exact order; no altered rating or certification is implied.
Logo et identité visuelle
Submit logo artwork and marking requirements for review against the available print area and mandatory product markings.
Packaging & Manuals
Define carton labels, packaging language, product identification and instruction requirements for the destination market.
Configuration Selection
Specify PXL6-100 with the required protection function, operating conditions and protection duty. Confirm the complete order combination.
Assembly Requirements
Provide the mounting and connection requirements for review. Changes to the housing, terminals or operating arrangement require engineering approval.
Market Documentation
Request documents covering the exact PXL6-100 model and destination market. A standard reference alone is not evidence of certification.
Sample Approval
Agree the sample specification, drawing revision and acceptance criteria before confirming a production order.
Technical Documents and Support
PXL6-100 Technical Documents
Request the PXL6-100 datasheet, configuration drawing, installation instructions and available model-specific market documents.Request Datasheet
Dois-je avoir des documents techniques ?
Send the application, electrical requirements, assembly layout and destination market for configuration and document review.Contactez-nous
PXL6-100 Product FAQ
Does an RCCB protect against overload?
An RCCB does not provide integral overload protection. PXL6-100 must be coordinated with a suitable fuse or circuit breaker. Its rated current describes the permitted carrying-current duty under the specified conditions.
What is the difference between an RCCB and an RCBO?
An RCCB provides residual-current protection without integral overcurrent protection; an RCBO combines both functions. Choose PXL6-100 for a coordinated RCCB arrangement or evaluate an appropriate RCBO where integrated branch protection is required.
Does the 6000A rating mean PXL6-100 breaks short circuits on its own?
No. The PXL6-100 table identifies a conditional short-circuit current. Confirm the associated protective device and coordination conditions; do not advertise it as an independent 6kA MCB or RCBO.
How should I choose the PXL6-100 residual-current sensitivity?
Select the mA rating from the circuit purpose, equipment instructions and local requirements. Rated current in amperes is a separate specification. Confirm the exact PXL6-100 sensitivity variant and its operating-time data rather than using a larger threshold to mask recurring trips.
Why can a PXL6-100 installation trip repeatedly?
Possible causes include insulation faults, accumulated equipment leakage, incorrect neutral connections or an unsuitable protection type. Have a qualified person investigate the circuit and follow the device test instructions before changing the rating or replacing protection.
What should an importer include in a PXL6-100 inquiry?
Specify poles, AC supply, rated current, residual-current type and sensitivity, plus the overcurrent curve if ordering an RCBO. Add the destination market, required documents, quantity and marking requirements so the quotation identifies the exact configuration.
Specify the Right PXL6-100 Configuration
Send CHAC your required configuration, application, destination market and estimated quantity. We will review the requested specification and provide the relevant technical documents and commercial proposal.
