PXL6-100B Brettina elettromagnetica per rilevamento di correnti residue
L'interruttore differenziale elettromagnetico RCCB CHAC PXL6-100B offre protezione da corrente residua di tipo B per circuiti in corrente alternata, con correnti nominali da 10A a 100A. Selezionare la sensibilità e la disposizione dei poli per il circuito e coordinare la protezione separata da sovracorrente con il valore dichiarato di potere di interruzione nominale in condizioni specifiche.
Riassunto del prodotto
Il CHAC PXL6-100B Type B electromagnetic RCCB provides residual-current protection for AC circuits requiring Type B detection. Rated currents extend from 10A to 100A, while overload and short-circuit protection must be supplied by a coordinated protective device.
Per importatori, distributori e produttori di apparecchiature, CHAC può verificare la configurazione richiesta rispetto ai requisiti del circuito e alla documentazione del mercato di destinazione. Concordare il modello esatto, i disegni e i requisiti di marcatura prima dell’approvazione del campione o di un ordine ripetuto.
Punti chiave di selezione
Applicazioni tipiche
Evaluate PXL6-100B for circuits whose equipment instructions call for Type B residual-current detection. Confirm waveform coverage, sensitivity, poles and the complete protective arrangement before specifying it for an inverter, drive or charging installation.
Modulazioni e Guida alla selezione
| Elemento selezionabile | PXL6-100B configuration | Cosa verificare |
|---|---|---|
| Residual-current type | Tipo B | Select for the equipment waveform requirements; this is not an overcurrent trip curve. |
| Current range | 10–100A | Match the carrying current and assembly design; provide separate overcurrent protection. |
| Accordo di fornitura | 230V AC: 1P+N; 400V AC: 3P / 3P+N | Confirm the exact terminal and neutral arrangement. |
| Short-circuit coordination | 6000A conditional rating | Check the backup protective device and applicable test conditions. |
Use these checks to compare the protection function, configuration and related CHAC products before specifying PXL6-100B. Related products are selection alternatives or system components, not automatic replacements.
Use Type B only where the protection design calls for it
Type B selection depends on the residual-current waveforms that equipment can produce and the installation requirements.
Check coordination before replacing a Type AC or A device
Review the sensitivity, time behavior, pole arrangement, supply rating and backup protection together.
Compare PXL6-100 for the required function
The CHAC PXL6-100 electromagnetic RCCB provides residual-current protection with Type AC or Type A options and rated currents from 10A to 100A. Match the sensitivity and pole arrangement to the circuit, and provide coordinated overcurrent protection for the installation.
Compare PXB6L-63B for the required function
Il RCBO elettromagnetico CHAC PXB6L-63B combina la protezione da sovraccarico e da cortocircuito con la protezione da corrente residua di tipo B. La sua gamma 6–63A comprende quattro configurazioni polari e curve di intervento B/C/D, consentendo di definire la configurazione richiesta in base alle esigenze del circuito e della corrente residua.
Need Help Specifying PXL6-100B?
Send the circuit requirements, selected configuration, destination market and quantity for a model-specific review.
Use Type B only where the protection design calls for it
Type B selection depends on the residual-current waveforms that equipment can produce and the installation requirements. It does not mean that the RCCB is suitable as a DC circuit breaker, or that it replaces equipment-specific protection instructions.
Check coordination before replacing a Type AC or A device
Review the sensitivity, time behavior, pole arrangement, supply rating and backup protection together. For the PXL6-100B, confirm the exact sensitivity and operating-time documentation before approving a replacement or repeat order.
How to Specify a PXL6-100B Order
Use the configuration details below in the purchase specification. Keep the approved drawing revision and product identification with the order so repeat deliveries can be checked consistently.
| Order detail | Information to include |
|---|---|
| Residual-current type | Type B — Select for the equipment waveform requirements; this is not an overcurrent trip curve. |
| Current range | 10–100A — Match the carrying current and assembly design; provide separate overcurrent protection. |
| Accordo di fornitura | 230V AC: 1P+N; 400V AC: 3P / 3P+N — Confirm the exact terminal and neutral arrangement. |
| Short-circuit coordination | 6000A conditional rating — Check the backup protective device and applicable test conditions. |
| Project and documents | Supply the application, installation conditions and destination-market document requirements. |
| Quantity and identification | State the quantity, sample requirement, packaging language and any proposed branding; confirm feasibility before approval. |
Check Installation Fit Before Approval
Specifiche tecniche
| Parametro | |
| Rated Voltage | 230V AC(1P+N); 400V AC(3P、3P+N) |
| Corrente nominale (A) | 10A、16A、20A、25A、32A、40A、50A、63A、80A、100A |
| Rated Residual Operating Current | 10mA(10A~40A), 30mA, 100mA, 400mA |
| Rated Residual Non-Operating Current | 0.5IΔn |
| Type of Residual Current(with DC component) | B type |
| Numero di polacchi | 1P+N、3P、3P+N |
| Rated Conditional Short-Circuit Current | 6000A |
| Rated Conditional Residual Short-Circuit Current | 6000A |
| Rated Making and Breaking Capacity | 630A(In≤63A); 10In(In>63A) |
| Rated Residual Making and Breaking Capacity | 630A(In≤63A); 10In(In>63A) |
| Tightening Torque | (2.5～3.0)N.m |
| Classe di protezione | IP20 |
| Livello di inquinamento | 2 |
| Installation Category | Ⅱ |
| Standard | GB 16916.1, IEC61008-1 |
| Certificazione | CE CB CCC |DEKRA Certified |
Operating time (for residual current devices)
| In (A) | IΔn (A) | Breaking time when the residual current equals the following values(s) | ||||
| IΔn | 2IΔn | 5IΔn | 5A、10A、20A、50A、100A、200A | IΔt | ||
| 10～100A | 0.03、0.01、0.1、0.3 | 0.3 | 0.15 | 0.04 | 0.04 | 0.04 |
Mechanical endurance&Electrical endurance
| In (A) | Number of operating cycles | Operating frequency (cycles per hour) | |
| Number of on-load operating cycles | Number of no-load operating cycles | ||
| 10～25A | 2000 | 2000 | 240 |
| 32A～100A | 2000 | 1000 | 120 |
Designazione del tipo
Dimensioni (mm)
Perché scegliere CHAC
CHAC Electric supplies electrical protection and control products for importers, distributors and equipment brands. For PXL6-100B, agree the configuration, technical documents, approved sample and identification requirements before production. The company facilities shown below provide company context, not a claim that every model uses the same production or test process.
01
CONFIRM THE SPECIFICATION
Agree the PXL6-100B configuration, circuit duty and installation requirements.
02
REVIEW THE DOCUMENTS
Confirm model-specific drawings and destination-market requirements.
03
APPROVE THE SAMPLE
Record the accepted configuration and marking requirements.
04
DEFINE ORDER CHECKS
Agree packaging, identification and delivery requirements in the quotation.
Linea di assemblaggio automatizzata
Laboratorio di test
Iniezione e stampaggio
Ispezione di qualità
Cosa possiamo personalizzare?
Discuss PXL6-100B product identification, packaging and documentation with CHAC. Each proposed change is subject to technical feasibility, marking rules and approval of the exact order; no altered rating or certification is implied.
Logo e branding
Submit logo artwork and marking requirements for review against the available print area and mandatory product markings.
Packaging & Manuals
Define carton labels, packaging language, product identification and instruction requirements for the destination market.
Configuration Selection
Specify PXL6-100B with the required residual-current type, operating conditions and protection duty. Confirm the complete order combination.
Assembly Requirements
Provide the mounting and connection requirements for review. Changes to the housing, terminals or operating arrangement require engineering approval.
Market Documentation
Request documents covering the exact PXL6-100B model and destination market. A standard reference alone is not evidence of certification.
Sample Approval
Agree the sample specification, drawing revision and acceptance criteria before confirming a production order.
Technical Documents and Support
PXL6-100B Technical Documents
Request the PXL6-100B datasheet, configuration drawing, installation instructions and available model-specific market documents.Request Datasheet
Necessita di documenti tecnici?
Send the application, electrical requirements, assembly layout and destination market for configuration and document review.Contattaci
PXL6-100B Product FAQ
What is the difference between Type A and Type B RCCBs?
Type B provides broader specified residual-current waveform coverage, including smooth DC detection under its applicable conditions. Select according to the equipment and installation requirements. PXL6-100B is the Type B model; confirm the exact device documentation.
Can PXL6-100B replace an MCB?
No. It is an RCCB and does not provide integral overload and short-circuit protection. Use a coordinated overcurrent device, or evaluate an appropriate Type B RCBO if integrated protection is required.
Is a Type B RCCB the same as a B-curve circuit breaker?
No. Type B describes residual-current detection, while a B curve describes an overcurrent trip characteristic. PXL6-100B is not specified by an MCB B/C/D curve.
How should I choose the PXL6-100B residual-current sensitivity?
Select the mA rating from the circuit purpose, equipment instructions and local requirements. Rated current in amperes is a separate specification. Confirm the exact PXL6-100B sensitivity variant and its operating-time data rather than using a larger threshold to mask recurring trips.
Why can a PXL6-100B installation trip repeatedly?
Possible causes include insulation faults, accumulated equipment leakage, incorrect neutral connections or an unsuitable protection type. Have a qualified person investigate the circuit and follow the device test instructions before changing the rating or replacing protection.
What should an importer include in a PXL6-100B inquiry?
Specify poles, AC supply, rated current, residual-current type and sensitivity, plus the overcurrent curve if ordering an RCBO. Add the destination market, required documents, quantity and marking requirements so the quotation identifies the exact configuration.
Specify the Right PXL6-100B Configuration
Send CHAC your required configuration, application, destination market and estimated quantity. We will review the requested specification and provide the relevant technical documents and commercial proposal.
Prodotti correlati
-
Brettiera a circuito ridotto per uso in corrente alternata (AC) della serie CQB3-63, 50 Hz/60 Hz
-
Dispositivo di protezione da sovratensione della serie CQ-T2-DC (SPD)
-
PXL6a-100 Electromagnetic Residual Current Operated Circuit Breaker
-
Interruttore di sicurezza elettronico a vuoto della serie CQB3LE-63