PXB6DC-125M Zmniejszona prądowa blokada obwodów
The PXB6DC-125M Zostaje ona określona dla ochrony przed przeciążeniem i zwarciem stałym. Wybierz ją w oparciu o opublikowane dane dotyczące napięcia, prądu, biegunów oraz zabezpieczeń, a następnie potwierdź koordynację przewodów, warunki awarii, wymagania dotyczące obudowy oraz lokalne zasady instalacji.
Product Overview
PXB6DC-125M is a DC circuit breaker 125A for 1P DC 24–125V; 2P DC 24–250V applications. It is intended for PV, telecom, energy-storage or control circuits when the DC fault study supports the rating; this describes an evaluation context, not a universal approval. Confirm the complete circuit design before specifying the product.
DC overload and short-circuit protection is distinct from adjacent protection functions. Do not infer AC/DC suitability, residual-current protection, automatic control or isolation performance from the product family name alone.
Key Features
Typical Applications
PV, telecom, energy-storage or control circuits when the DC fault study supports the rating. Verify system voltage, expected fault current or leakage, wiring arrangement, environment, coordination and applicable rules for the ordered configuration.
Applications and Selection Guide
Use the verified PXB6DC-125M records below to create a shortlist. Product labels do not replace the project calculation, coordination review or exact installation instructions.
| Selection point | PXB6DC-125M reference | What the project must confirm |
|---|---|---|
| Rated current | 63–125A | Design current, conductor capacity, ambient and grouping |
| Voltage and frequency | 1P DC 24–125V; 2P DC 24–250V | Supply system and equipment rating |
| Polacy | 1P / 2P | Conductors to be switched, protected or isolated |
| Protection / control | Ochrona przed przeciążeniem i zwarciem | Required function and adjacent-device coordination |
| Fault / residual data | 10kA Icu; 7.5kA Ics | Prospective short-circuit or leakage conditions |
AC vs DC Interruption
DC interruption duty is not interchangeable with AC. Confirm the model’s DC voltage, pole arrangement, Icu/Ics and wiring instructions.
DC Fault Duty
Review Circuit Protection →
Model-Specific Ratings
Use the exact technical table for rated voltage, current, poles, terminals, life and environmental limits.
Verified Data
View Technical Support →
Installation and Coordination
Check the complete circuit, conductor sizing, fault or leakage conditions, enclosure and local rules before energising.
Engineering Check
Discuss a Configuration →
Ordering Information
State model, rating, poles, system, quantity, destination market and document requirements so the configuration can be reviewed.
Project Inputs
Send Project Details →
Ordering Guide
- State the exact model: PXB6DC-125M.
- Provide rated current and voltage from the published technical table.
- Confirm poles and the required protection, isolation or control function.
- Provide application, expected fault/leakage conditions, destination market and quantity.
- List accessory, terminal, documentation and approved marking or packaging requirements.
Ordering Specification
Please specify the following when ordering:
- Product Model: PXB6DC-125M
- Number of Poles: 1P, 2P
- Rated Current & Tripping Curve: e.g., 125A
- Rated Current (In): 63, 80, 100, 125A
- Quantity: e.g., 100 pcs
- PXB6DC-125M 2P 125A 100 pcs
The quantity shown is an ordering example, not a minimum order quantity.
Installation and Coordination Checks
- Use the exact model drawing and instructions; do not infer wiring or accessory compatibility from another product.
- Verify conductor size, terminal torque, enclosure conditions, temperature, grouping and clearances.
- Coordinate upstream and downstream devices and confirm the required fault, leakage or voltage response.
- Installation, testing and maintenance must be completed by qualified personnel under applicable rules.
Type designation
Tripping curves
Dimensions(mm)
Technical Specifications
| Parameter | Szczegóły techniczne |
|---|---|
| Rated Voltage (V) | 1P DC24V/48V/80V/110V/125V |
| 2P DC24V/48V/80V/110V/125V/160V/220V/250V | |
| Rated Current (A) | 63, 80, 100, 125 |
| Rated Insulation Voltage (Ui) | 500V |
| Number of Poles | 1P, 2P |
| Rated impulse withstand voltage Uimp(kV) | 4 |
| Ultimate Breaking Capacity (Icu)(kA) | 10 |
| Service Breaking Capacity (Ics)(kA) | 7.5 |
| Mechanical Endurance | ≥10000 |
| Electrical Endurance | ≥1500 |
| Pollution Degree | 3 |
| Standard | GB/T14048.2、IEC60947-2 |
| Certyfikacja | CE·CB·CCC|TÜV Rheinland |
Tripping Characteristics (Reference Temperature: 30℃)
| Item | Test Current (A) | Initial Status | Time limit for tripping or non-tripping | Expected result | Remarks |
|---|---|---|---|---|---|
| a | 1.05In | Cold | t≤2h(In>63A) | Non-tripping | Current smoothly rises to specified value within 5s |
| t≤1h(In≤63A) | |||||
| b | 1.3In | Following item a test | t＜2h(In>63A) | Tripping | |
| t＜1h(In≤63A) | |||||
| c | 2In | Cold | 1s＜t＜600s | Tripping | |
| d | 4In、8In、12In (±20%) |
Cold | t≤0.2s | Tripping | Circuit switched on by closing an auxiliary switch. Verifies rapid breaking capability. |
Note: The term “cold” means that the test is carried out at a reference calibration temperature without load before the test
Dlaczego wybrać CHAC
With 30+ years of manufacturing experience, 1100+ employees, 100M+ poles
annual capacity and 90% automated production, CHAC provides stable production capacity and strict
quality control for global OEM/ODM customers. Our in-house manufacturing system supports long-term
cooperation for electrical brands, importers and distributors.
30+
ROKIĘLNE DOŚWIADCZENIE
Specjalizujemy się w produkcji urządzeń elektrycznych niskiego napięcia
1100+
ZAPOSOBOWANI
Profesjonalny zespół zapewnia stabilną jakość i terminowość dostaw
100 milionów+
ROZDZIELANIE NAPĘDU ROZNOMÓWCOW WROCŁAWA
Duża zdolność produkcyjna umożliwiająca zaspokojenie globalnego popytu
90%
AUTOMATYCZNA PRODUKCJA
Zaawansowana automatyzacja dla wysokiej wydajności i spójności
Automatyczna linia montażowa
Laboratorium Badawcze
Wtrysk i tłoczenie
Inspekcja jakości
Strict quality control system ensures every product meets global standards.
Czego możemy się dostosować?
For PXB6DC-125M projects, CHAC can review private-label marking, packaging, approved appearance options and the published electrical configurations. Requests outside the published range require engineering evaluation, testing and feasibility review.
Logo i branding
Dostosowane drukowanie logo, znakowanie laserowe oraz rozwiązania z naklejkami z nazwą firmy.
Opakowanie
Dostosowanie
Skoréjone pudełka kolorowe, kartony, etykiety i instrukcje obsługi.
Elektryczny
Dostosowanie
Current, voltage, breaking capacity, trip curve and other
special functions.
Produkt
Wygląd
Możliwość dostosowania koloru mebli, uchwytów oraz wyglądu.
Certyfikacja
Obsługa klienta
Products comply with international standards and market
requirements.
Inżynieria
Rozwój
Ocena rysunków, testowanie prototypów oraz produkcja masowa.
Pobierz
Miniatura wyłącznika PXB6
Complete product overview for low-voltage electrical components and product selection reference.
Need Technical Documents?
Contact us for datasheets, certificates, drawings, selection guidance or OEM/ODM project support.
PXB6DC-125M Product FAQ
What is the PXB6DC-125M used for?
The PXB6DC-125M is specified for DC overload and short-circuit protection in 1P DC 24–125V; 2P DC 24–250V applications, within the ratings and configurations listed in its technical table. Final suitability depends on the complete circuit design.
How does the PXB6DC-125M work?
Its operating principle follows the documented function: DC overload and short-circuit protection. Use the exact model documentation for thresholds, timing, trip behaviour, terminals and test procedures.
How do I choose the PXB6DC-125M rating and poles?
Start with the design current and system arrangement, then choose only a published option. The page lists pole options as 1P / 2P; confirm neutral, polarity, conductors and isolation requirements.
What safety limitation applies to the PXB6DC-125M?
Do not treat the PXB6DC-125M as a universal substitute for another device. Confirm 10kA Icu; 7.5kA Ics, the system voltage, fault or leakage conditions and any separate upstream protection before selection.
Can the PXB6DC-125M be used in another circuit type?
Only when the exact ordered configuration is rated for that circuit. AC and DC duties, residual-current devices, isolators, smart controls and voltage protectors are not interchangeable by appearance or current rating.
How should the PXB6DC-125M be installed and tested?
Use the exact product drawing, terminal identification and instructions. A qualified person should verify isolation, conductors, torque, settings, coordination and functional tests before energising the circuit.
Confirm the Right PXB6DC-125M Configuration
Send the model, rating, poles, system voltage, application, quantity and document requirements. CHAC will review the request against the published data.
