Przełącznik alarmowy CQAS2 do napięć AC 230 V i DC 110 V
The CQAS2 alarm contact is specified for alarm switch for fault-trip indication. Published data includes AC 230V 50Hz / DC 110V and AC-15 230V 6A; DC-13 110V 1A. Confirm the accessory interface, control circuit, wiring and destination-market requirements before ordering.
Product Overview
CQAS2 is a alarm contact for low-voltage panel and breaker accessory systems. The summary below uses the published model record; it does not replace the complete drawing, wiring instructions or project design review.
Alarm switch for fault-trip indication. AC-15 230V 6A; DC-13 110V 1A is the published electrical reference. Compatibility, contact logic and installation details must be confirmed for the exact ordered version.
Key Features
Typical Applications
Use it where a breaker fault trip must be reported to a panel, PLC, BMS or audible signaling circuit. An alarm contact should not be described as a normal auxiliary status contact; confirm the target breaker's accessory interface and the project's alarm logic.
Applications and Selection Guide
Use the product-specific values below as a shortlist, then validate the complete circuit and mechanical interface. An accessory rating alone does not establish compatibility with every breaker, panel or control system.
| Selection point | CQAS2 reference | What the project must confirm |
|---|---|---|
| Funkcja podstawowa | alarm switch for fault-trip indication | Confirm the required signal or protection function before ordering |
| Electrical reference | AC 230V 50Hz / DC 110V | Match the project control or supply circuit |
| Rating / operating window | AC-15 230V 6A; DC-13 110V 1A | Use the published range; do not infer missing ratings |
| Interface | zamontowany jako modułowe akcesorium z kompatybilnym wyłącznikiem | Verify the compatible breaker, panel, base or rail interface |
| Wiring | nie podano w karcie produktu | Final conductor and protection selection follows the project design and local rules |
| Documents | IEC 60947-5-1 | Request the exact drawing and applicable compliance documents for the ordered version |
Function and signal path
Alarm switch for fault-trip indication. Confirm whether the circuit needs status feedback, fault alarm, remote trip or voltage release.
Control-circuit fit
AC 230V 50Hz / DC 110V. Match the control voltage and operating window to the project circuit; never assume a nearby rating is interchangeable.
Mechanical interface
installed as a modular accessory with the compatible breaker. Confirm breaker family, rail/base or panel interface, clearances and maintenance access.
Wiring and documentation
not stated on the product record. Request the exact drawing and installation document for the ordered configuration.
Ordering Guide
- Specify the exact model and accessory function: CQAS2, alarm switch for fault-trip indication.
- State the control/supply voltage and any required operating window.
- Confirm the compatible breaker family, panel, base or DIN-rail interface.
- Provide quantity, destination market, wiring details and required technical documents.
- Ask CHAC to verify any non-standard marking, packaging or configuration request before production.
Installation and Coordination Checks
- Use the exact product drawing and installation instructions for the ordered configuration.
- Verify voltage, conductor, terminal, enclosure, clearances and maintenance access.
- Check the accessory’s signal or trip logic against the control circuit and upstream/downstream protection.
- Installation, testing and maintenance must be carried out by qualified personnel under applicable rules.
Type designation
Dimensions(mm)
Technical Specifications
| Parameter | ||
| AC-15 | Rated operational Voltage | AC 230V 50Hz |
| Rated operating current | 6A | |
| DC-13 | Rated operational Voltage | DC110V |
| Rated operating current | 1A | |
| Mechanical Life | 10000 | |
| Standards | GB/T 14048.5, IEC 60947-5-1 | |
Dlaczego wybrać CHAC
With 30+ years of manufacturing experience, 1100+ employees, 100M+ poles
annual capacity and 90% automated production, CHAC provides stable production capacity and strict
quality control for global OEM/ODM customers. Our in-house manufacturing system supports long-term
cooperation for electrical brands, importers and distributors.
30+
ROKIĘLNE DOŚWIADCZENIE
Specjalizujemy się w produkcji urządzeń elektrycznych niskiego napięcia
1100+
ZAPOSOBOWANI
Profesjonalny zespół zapewnia stabilną jakość i terminowość dostaw
100 milionów+
ROZDZIELANIE NAPĘDU ROZNOMÓWCOW WROCŁAWA
Duża zdolność produkcyjna umożliwiająca zaspokojenie globalnego popytu
90%
AUTOMATYCZNA PRODUKCJA
Zaawansowana automatyzacja dla wysokiej wydajności i spójności
Automatyczna linia montażowa
Laboratorium Badawcze
Wtrysk i tłoczenie
Inspekcja jakości
Strict quality control system ensures every product meets global standards.
Czego możemy się dostosować?
For CQAS2 projects, CHAC can review private-label marking, packaging, approved electrical options, accessory interface and technical-document requirements. Requests outside the published range are subject to engineering evaluation, testing, MOQ and project feasibility.
Logo i branding
Private-label marking and nameplate options are subject to artwork review and sample approval.
Opakowanie
Dostosowanie
Cartons, labels and manuals can be prepared for the approved order specification and destination market.
Elektryczny
Dostosowanie
Published AC 230V 50Hz / DC 110V, AC-15 230V 6A; DC-13 110V 1A and interface options are reviewed against the ordered CQAS2 configuration; non-standard requests require technical evaluation.
Produkt
Wygląd
Appearance options can be reviewed subject to tooling, MOQ, marking requirements and technical feasibility.
Certyfikacja
Obsługa klienta
Datasheets, drawings and verified document information are supplied for the applicable approved configuration.
Inżynieria
Rozwój
Project support may include drawing review, sample evaluation, testing and production planning, subject to technical approval.
Pobierz
CQAS2 Technical Documents
Request the current datasheet, drawings, wiring information and applicable documents for the ordered accessory configuration.
Need Technical Documents?
Contact us for datasheets, certificates, drawings, selection guidance or OEM/ODM project support.
CQAS2 Product FAQ
What does the CQAS2 indicate?
The CQAS2 is intended to signal a breaker fault trip. It should be evaluated as an alarm contact, not assumed to follow every normal manual open/close operation.
What is the difference between an alarm contact and an auxiliary contact?
An alarm contact is used to report a fault-trip condition, while an auxiliary contact normally reports the breaker's open/closed status. The exact contact logic must be verified from the product drawing.
What ratings are published for the CQAS2?
The published ratings are AC-15 230V 6A; DC-13 110V 1A with AC 230V 50Hz / DC 110V. Confirm the connected PLC, indicator or audible alarm circuit is within those values.
Can the CQAS2 drive an audible alarm directly?
It can be part of an alarm circuit, but the complete circuit must be checked for voltage, current, isolation and any relay or interface required by the project.
Which breaker is the CQAS2 compatible with?
The CQAS2 is described as a modular accessory for a compatible breaker family. Confirm exact breaker model and interface before ordering.
How should the CQAS2 be tested?
Use the approved product instructions and a controlled fault-simulation or functional test method suitable for the installed system. Testing must be performed by qualified personnel.
Confirm the Right CQAS2 Configuration
Share the required function, voltage, interface, quantity, destination market and technical documents. CHAC will review the request against the published accessory data.
