Interruptor de Alarme CQAS2 para Aplicações AC 230V e DC 110V
O CQAS2 alarm contact is specified for alarm switch for fault-trip indication. Published data includes AC 230V 50Hz / DC 110V and AC-15 230V 6A; DC-13 110V 1A. Confirm the accessory interface, control circuit, wiring and destination-market requirements before ordering.
Visão Geral do Produto
CQAS2 is a alarm contact for low-voltage panel and breaker accessory systems. The summary below uses the published model record; it does not replace the complete drawing, wiring instructions or project design review.
Alarm switch for fault-trip indication. AC-15 230V 6A; DC-13 110V 1A is the published electrical reference. Compatibility, contact logic and installation details must be confirmed for the exact ordered version.
Principais Características
Aplicações Típicas
Use it where a breaker fault trip must be reported to a panel, PLC, BMS or audible signaling circuit. An alarm contact should not be described as a normal auxiliary status contact; confirm the target breaker's accessory interface and the project's alarm logic.
Guia de Candidaturas e Seleção
Use the product-specific values below as a shortlist, then validate the complete circuit and mechanical interface. An accessory rating alone does not establish compatibility with every breaker, panel or control system.
| Ponto de seleção | CQAS2 reference | O que o projeto deve confirmar |
|---|---|---|
| Primary function | alarm switch for fault-trip indication | Confirm the required signal or protection function before ordering |
| Electrical reference | CA 230V 50Hz / CC 110V | Match the project control or supply circuit |
| Rating / operating window | AC-15 230V 6A; DC-13 110V 1A | Use the published range; do not infer missing ratings |
| Interface | instalado como um acessório modular com o disjuntor compatível | Verify the compatible breaker, panel, base or rail interface |
| Wiring | não consta no registo do produto | Final conductor and protection selection follows the project design and local rules |
| Documentos | IEC 60947-5-1 | Request the exact drawing and applicable compliance documents for the ordered version |
Function and signal path
Alarm switch for fault-trip indication. Confirm whether the circuit needs status feedback, fault alarm, remote trip or voltage release.
Control-circuit fit
AC 230V 50Hz / DC 110V. Match the control voltage and operating window to the project circuit; never assume a nearby rating is interchangeable.
Mechanical interface
installed as a modular accessory with the compatible breaker. Confirm breaker family, rail/base or panel interface, clearances and maintenance access.
Wiring and documentation
not stated on the product record. Request the exact drawing and installation document for the ordered configuration.
Guia de Encomenda
- Specify the exact model and accessory function: CQAS2, alarm switch for fault-trip indication.
- State the control/supply voltage and any required operating window.
- Confirm the compatible breaker family, panel, base or DIN-rail interface.
- Provide quantity, destination market, wiring details and required technical documents.
- Ask CHAC to verify any non-standard marking, packaging or configuration request before production.
Verificações de Instalação e Coordenação
- Use the exact product drawing and installation instructions for the ordered configuration.
- Verify voltage, conductor, terminal, enclosure, clearances and maintenance access.
- Check the accessory’s signal or trip logic against the control circuit and upstream/downstream protection.
- Installation, testing and maintenance must be carried out by qualified personnel under applicable rules.
Designação do tipo
Dimensões (mm)
Especificações Técnicas
| Parâmetro | ||
| AC-15 | Rated operational Voltage | AC 230V 50Hz |
| Rated operating current | 6A | |
| DC-13 | Rated operational Voltage | DC110V |
| Rated operating current | 1A | |
| Mechanical Life | 10000 | |
| Normas | GB/T 14048.5, IEC 60947-5-1 | |
Porquê escolher a CHAC
Com mais de 30 anos de experiência em fabrico, mais de 1100 funcionários, mais de 100 milhões de postes
Com uma capacidade anual e um processo de produção automatizado 90%, a CHAC garante uma capacidade de produção estável e rigorosos
Controlo de qualidade para clientes OEM/ODM globais. O nosso sistema de fabrico interno suporta a longo prazo
cooperação para marcas elétricas, importadores e distribuidores.
30+
ANOS DE EXPERIÊNCIA
Especializado em fabrico de baixa tensão elétrica
1100+
FUNCIONÁRIOS
Equipa profissional garante qualidade e entrega estáveis
100M+
CAPACIDADE ANUAL DE POSTOS
Capacidade de produção em larga escala para satisfazer a procura global
90%
PRODUÇÃO AUTOMATIZADA
Automação avançada para alta eficiência e consistência
Linha de Montagem Automatizada
Laboratório de Ensaios
Injeção e Estampagem
Inspeção de Qualidade
Um rigoroso sistema de controlo de qualidade garante que cada produto cumpre as normas globais.
O que podemos personalizar?
For CQAS2 projects, CHAC can review private-label marking, packaging, approved electrical options, accessory interface and technical-document requirements. Requests outside the published range are subject to engineering evaluation, testing, MOQ and project feasibility.
Logótipo e Identidade Visual
Private-label marking and nameplate options are subject to artwork review and sample approval.
Embalagem
Personalização
Cartons, labels and manuals can be prepared for the approved order specification and destination market.
Elétrico
Personalização
Published AC 230V 50Hz / DC 110V, AC-15 230V 6A; DC-13 110V 1A and interface options are reviewed against the ordered CQAS2 configuration; non-standard requests require technical evaluation.
Produto
Aparência
Appearance options can be reviewed subject to tooling, MOQ, marking requirements and technical feasibility.
Certificação
Apoio
Datasheets, drawings and verified document information are supplied for the applicable approved configuration.
Engenharia
Desenvolvimento
Project support may include drawing review, sample evaluation, testing and production planning, subject to technical approval.
Transferir
CQAS2 Technical Documents
Request the current datasheet, drawings, wiring information and applicable documents for the ordered accessory configuration.
Precisa de Documentos Técnicos?
Contacte-nos para folhas de dados, certificados, desenhos, orientação de seleção ou suporte a projetos OEM/ODM.
CQAS2 Product FAQ
What does the CQAS2 indicate?
The CQAS2 is intended to signal a breaker fault trip. It should be evaluated as an alarm contact, not assumed to follow every normal manual open/close operation.
What is the difference between an alarm contact and an auxiliary contact?
An alarm contact is used to report a fault-trip condition, while an auxiliary contact normally reports the breaker's open/closed status. The exact contact logic must be verified from the product drawing.
What ratings are published for the CQAS2?
The published ratings are AC-15 230V 6A; DC-13 110V 1A with AC 230V 50Hz / DC 110V. Confirm the connected PLC, indicator or audible alarm circuit is within those values.
Can the CQAS2 drive an audible alarm directly?
It can be part of an alarm circuit, but the complete circuit must be checked for voltage, current, isolation and any relay or interface required by the project.
Which breaker is the CQAS2 compatible with?
The CQAS2 is described as a modular accessory for a compatible breaker family. Confirm exact breaker model and interface before ordering.
How should the CQAS2 be tested?
Use the approved product instructions and a controlled fault-simulation or functional test method suitable for the installed system. Testing must be performed by qualified personnel.
Confirm the Right CQAS2 Configuration
Share the required function, voltage, interface, quantity, destination market and technical documents. CHAC will review the request against the published accessory data.
