Fabricante de OEM de contactor de CA industrial serie CQC6
El Fabricante de OEM de contactor de CA industrial serie CQC6 Es un contactor CHAC AC para conmutación remota y control de motor. La página incluye la tabla técnica específica del modelo y las imágenes originales del producto, para que los compradores puedan verificar la tensión, el corriente, la configuración, el montaje y los estándares aplicables antes de realizar un pedido. La idoneidad final depende del circuito completo, del método de instalación y de las normas del mercado de destino.
Descripción del producto
CQC6 Series Industrial AC Contactor OEM Manufacturer is a AC contactor intended for remote switching and motor control. The current product record identifies it for motor starters, HVAC and automation panels. Use the exact model variant and preserved technical source as the basis for procurement rather than assuming that every family member has the same rating.
Verified source summary: Type designation Dimensions (mm) Model number Amax Bmax Cmax Dmax a/a' b C Ф CQC6-06~25 46 76 83 117 35 50 60 Ф4.5 CQC6-32~38 57 85 96 130 40/43 48 / Ф4.5 CQC6-40~65 76 128 115 149 40/59 100 110 Ф5.5 CQC6-80~95 85 128 124 158 40/67 100 110 Ф5.5 Accessories Description Contact Configuration Technical Specifications Model number CQC6 -6 CQC6 -9 CQC6 -12 CQC6 -18 CQC6 -25 CQC6 -32 CQC6 -38 CQC6 -40 CQC6 -50 CQC6 -65 CQC
Características clave
Aplicaciones típicas
Typical use can include motor starters, HVAC and automation panels when the project confirms system voltage, current, fault or surge exposure, conductor and enclosure requirements, and the selected variant’s installation instructions. This page does not replace the project design or the authority having jurisdiction.
Guía de Solicitudes y Selección
Use the following decision points with the preserved model data. Product-family descriptions explain intent, but the exact technical table controls the ordered variant.
| Punto de selección | Fabricante de OEM de contactor de CA industrial serie CQC6 | Lo que el proyecto debe confirmar |
|---|---|---|
| Solicitud | AC Contactor projects | Confirm the actual system and environment |
| Selection basis | Conmutación remota y control de motor | Use the exact model and technical table |
| Instalación | Follow the model instructions | Check mounting, clearances and termination |
| Cumplimiento | Use the listed standard where applicable | Verify edition, scope and destination rules |
| Adjacent product | Evaluate the related CHAC family where function differs | Do not substitute without engineering review |
Function
Conmutación remota y control de motor
Match the protection or switching function to the system.
Configuración
Model-specific options
Confirm current, voltage, poles, terminals or accessories from the table.
Instalación
Mechanical and electrical fit
Check enclosure, mounting, wiring space and maintenance access.
Project evidence
Documents and test records
Retain the approved drawing, technical sheet and commissioning record.
Guía de pedidos
- State the exact model and variant.
- Provide the system voltage, current, frequency and load or protection function.
- Confirm mounting, terminals, accessories, enclosure and environmental conditions.
- Share quantity, destination market and required technical documents.
Comprobaciones de Instalación y Coordinación
- Verify the model’s ratings and connection arrangement against the project drawings.
- Check conductor, busbar, enclosure, clearances and tightening requirements using the product documentation.
- Coordinate upstream and downstream protection or control devices where applicable.
- Use qualified personnel for installation, testing, isolation and maintenance.
Designación del tipo
Dimensiones (mm)
| Número de modelo | Amax | Bmax | Cmax | Dmax | a/a’ | b | C | Ф |
| CQC6-06~25 | 46 | 76 | 83 | 117 | 35 | 50 | 60 | Ф4.5 |
| CQC6-32~38 | 57 | 85 | 96 | 130 | 40/43 | 48 | / | Ф4.5 |
| CQC6-40~65 | 76 | 128 | 115 | 149 | 40/59 | 100 | 110 | Ф5.5 |
| CQC6-80~95 | 85 | 128 | 124 | 158 | 40/67 | 100 | 110 | Ф5.5 |
Descripción de accesorios
Contact Configuration
Especificaciones técnicas
| Número de modelo | CQC6 -6 |
CQC6 -9 |
CQC6 -12 |
CQC6 -18 |
CQC6 -25 |
CQC6 -32 |
CQC6 -38 |
CQC6 -40 |
CQC6 -50 |
CQC6 -65 |
CQC6 -80 |
CQC6 -95 |
|
| Rated insulation voltage (Ui) | 690V | ||||||||||||
| Tensión soportada de impulso nominal (Uimp) | 8kV | ||||||||||||
| Frecuencia nominal | 50Hz, 50/60Hz | ||||||||||||
| Number of poles (P) | 3 | ||||||||||||
| Rated Operational Current (A)- AC-3 | 220V/230V | 6 | 9 | 12 | 18 | 25 | 32 | 38 | 40 | 50 | 65 | 80 | 95 |
| 380V/400V | 6 | 9 | 12 | 18 | 25 | 32 | 38 | 40 | 50 | 65 | 80 | 95 | |
| 660V/690V | 4.8 | 6.6 | 8.9 | 12 | 18 | 20.2 | 20.2 | 34 | 39 | 42 | 49 | 49 | |
| Conventional Free-Air Thermal Current (A) (AC-1, θ ≤ 60℃) | 20 | 25 | 25 | 32 | 40 | 50 | 50 | 60 | 80 | 80 | 110 | 110 | |
| Short-Time Withstand Current (A) | 10s | 80 | 105 | 105 | 145 | 145 | 260 | 310 | 320 | 400 | 520 | 640 | 800 |
| 1min | 45 | 61 | 61 | 84 | 84 | 138 | 150 | 165 | 208 | 260 | 320 | 400 | |
| 10min | 20 | 30 | 30 | 40 | 40 | 60 | 60 | 72 | 84 | 110 | 135 | 135 | |
| Controlled 3-Phase Squirrel Cage Motor Power (kW) – AC-3 | 220V/230V | 1.5 | 2 | 3.5 | 4 | 6 | 7.5 | 9 | 11 | 15 | 18.5 | 22 | 25 |
| 380V/400V | 2.2 | 4 | 5.5 | 7.5 | 11 | 15 | 18.5 | 18.5 | 22 | 30 | 37 | 45 | |
| 660V/690V | 3 | 5.5 | 7.5 | 10 | 15 | 18.5 | 18.5 | 30 | 33 | 37 | 45 | 45 | |
| Short-circuit protection by gG fuses (U ≤ 690V) for Type 2 coordination, without integral thermal overload relay | 20 | 25 | 25 | 32 | 40 | 50 | 50 | 60 | 80 | 80 | 110 | 110 | |
| Electrical Endurance (104 operations) | 120 | 100 | 80 | ||||||||||
| Rated Making Capacity (AC-3) | 10 × Ie, in accordance with IEC 60947-4-1 and GB/T 14048.4. | ||||||||||||
| Rated Breaking Capacity (AC-3) | 8 × Ie, in accordance with IEC 60947-4-1 and GB/T 14048.4. | ||||||||||||
| Characteristics of AC controlcircuits | |||||||||||||
| Operating Frequency (operations/h) | 1200 | 600 | |||||||||||
| Mechanical Life (104 operations, 3600 ops/h) | 1200 | 1000 | 800 | 600 | |||||||||
| AC Coil Power (50/60Hz) | Pick-up (VA) | 70 | 110 | 200 | 200 | ||||||||
| Sealed (VA) | 8 | 11 | 20 | 20 | |||||||||
| Operate Time (ms) | Close | 12-22 | 12-22 | 20-35 | 20-35 | ||||||||
| Open | 4-19 | 4-19 | 6-15 | 6-15 | |||||||||
| Operate Voltage Range (50/60Hz) | Pick-up Voltage: 80%Us ~ 110%Us; Drop-out Voltage: 20%Us ~ 75%Us | ||||||||||||
| Rated Control Supply Voltage Us | AC 24/36/48/110/220/230/380/400/415/440V, 50/60Hz | ||||||||||||
| Applicable accessories | Auxiliary contact block | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● |
| Coil surge absorber | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
| Main circuit conductor | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
| Mechanical interlock | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
| Mechano-electrical interlock | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
| DIN rail mounting | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
| Certifications obtained | CCC CE CB | ||||||||||||
Main Circuit Conductor (Busbar)
| Producto Modelo |
Upper Conductor | Lower Conductor | Director | Applicable Models | ||||
| Amax | Bmax | Cmax | Amax | Bmax | Cmax | Dmax | ||
| F1-H1 | 88 | 24 | 28 | 88 | 17 | 28 | 2.5mm2 | CQC6-06/18 |
| F1-H2 | 103 | 29 | 33 | 103 | 20 | 35 | 6mm2 | CQC6-25/38 |
| F1-H3 | 134 | 43 | 55 | 134 | 30 | 50 | 10mm2 | CQC6-40/65 |
| F1-H4 | 150 | 52 | 51 | 150 | 37 | 50 | 16 mm2 | CQC5-80/95 |
Electrical/Mechanical Interlock
| Product Name | Content | Modelo de producto | Applicable Models | Wiring Diagram (ME) |
| Electrical Interlock | Electrical Interlock Kit | F2-LS3 | CQC6-06~38 |  |
| Electrical Interlock Kit | F2-LS4 | CQC6-40-95 | ||
| Mechanical Interlock | Mechanical Interlock Kit | F2-LS1 | CQC6-06~38 | |
| Mechanical Interlock Kit | F2-LS2 | CQC6-40~95 |
Component size diagram (mm)
RC Snubber (Coil Surge Suppression)
| Modelo de producto | Content | Applicable Models | Dimensiones (mm) | |
| F3-LY2EA | AC 24…48V | CQC6-06~38 |  |
 |
| F3-LY2GA | AC 50…127V | |||
| F3-LY2UA | AC 110…240V | |||
| F3-LY2NA | AC 380…415V | CQC6-40~95 | ||
| F3-LY2FC | AC 24…48V | |||
| F3-LY2GC | AC 50…127V | |||
| F3-LY2UC | AC 110…240V |  |
||
| F3-LY2NC | AC 380…415V | |||
Contactos Auxiliares
| Product Name | Modelo de producto | Content | Applicable Models | Dimensiones (mm) | ||
| Top-Mounted Auxiliary (2 Contacts) |
F4-11 | 1NO + 1NC | CQC6-06~95 | ① |  |
 |
| F4-20 | 2NO | |||||
| F4-02 | 2NC | |||||
| Top-Mounted Auxiliary (4 Contacts) |
F4-22 | 2NO + 2NC | ② | |||
| F4-40 | 4NO | |||||
| F4-04 | 4NC | |||||
| F4-13 | 1NO + 3NC | |||||
| F4-31 | 3NO + 1NC | |||||
| Parámetros eléctricos | |
| Conventional Thermal Current Ith | 10A |
| Rated Insulation Voltage Ui | 690V |
| Rated Impulse Withstand Voltage Uimp | 6kV |
| Minimum Switchable Load | 6V 100mA |
| Utilization Category | Tensión operativa nominal (V) | Rated Operational Current (A) |
| AC-15 | 380 | 0.95 |
| 220 | 1.6 | |
| DC-13 | 220 | 0.15 |
On-Delay Timer (Timer Head)
| Modelo de producto | Content | Applicable Models |
| F5-T0 | 0.1…3s | CQC6-06-95 |
| F5-T2 | 0.1…30s | |
| F5-T4 | 10…180s | |
| F5-S2 | 1…30s | |
| F5-D0 | 0.1…3s | |
| F5-D2 | 0.1…30s | |
| F5-D4 | 10…180s |
Side-Mounted Auxiliary
| Modelo de producto | Content | Applicable Models |
| F8-11 | 1NO + 1NC | CQC6-06-95 |
| F8-20 | 2NO | |
| F8-02 | 2NC |
¿Por qué elegir CHAC?
Con más de 30 años de experiencia en fabricación, más de 1100 empleados, más de 100 millones de postes
Con una capacidad anual y un proceso de producción automatizado 90%, CHAC ofrece una capacidad de producción estable y un estricto
control de calidad para clientes OEM/ODM globales. Nuestro sistema de fabricación interno respalda a largo plazo
Cooperación para marcas eléctricas, importadores y distribuidores.
30+
AÑOS DE EXPERIENCIA
Especializado en fabricación eléctrica de bajo voltaje
1100+
EMPLEADOS
Equipo profesional garantiza calidad y entrega estables
100M+
CAPACIDAD ANUAL DE LOS POLOS
Capacidad de producción a gran escala para satisfacer la demanda mundial
90%
PRODUCCIÓN AUTOMATIZADA
Automatización avanzada para alta eficiencia y consistencia
Línea de ensamblaje automatizada
Laboratorio de pruebas
Inyección y Estampado
Inspección de calidad
Un estricto sistema de control de calidad garantiza que cada producto cumpla con los estándares mundiales.
¿Qué podemos personalizar?
CHAC admite la personalización del voltaje de la bobina y la configuración de los contactos auxiliares.,
parámetros eléctricos, marca del producto, diseño de envasado y desarrollo de ingeniería según los equipos y requisitos de mercado de los clientes.
Voltaje de la bobina
Opciones de voltaje de bobina de CA y CC adaptadas a los requisitos de la aplicación.
Contactos Auxiliares
Combinaciones flexibles de contactos auxiliares para diferentes funciones de control.
Parámetros eléctricos
Las clasificaciones actuales, los rangos de protección y los parámetros funcionales se pueden personalizar.
Marca de producto
Logotipos de marca privada, placas de identificación y soporte para la identificación de productos.
Diseño de empaque
Soluciones de embalaje, cajas personalizadas, etiquetas y manuales.
Desarrollo de Ingeniería
Soporte desde la optimización de dibujos hasta el desarrollo de productos y la adaptación de aplicaciones.
Descargar
Contactor de CA Serie CQC6
Descripción general completa de componentes eléctricos de bajo voltaje y referencia para la selección de productos.
¿Necesita documentos técnicos?
Contáctenos para obtener hojas de datos, certificados, planos, orientación de selección o soporte para proyectos OEM/ODM.
CQC6 Product FAQ
What loads can the CQC6 contactor switch?
Use the published utilization category, operational current and voltage for the selected variant. Resistive, motor and capacitive loads require different checks.
How do I select an AC contactor size?
Start with load current, utilization category, starts per hour, coil voltage, poles and short-circuit coordination. Current alone is not enough.
Can a thermal relay be paired with it?
Where the product record supports the combination, a thermal relay can form a motor starter. Confirm mechanical fit, current range and control wiring.
Which coil voltage should I specify?
Match the control supply shown on the project drawing with the coil option for the exact model. Never assume the coil voltage from the main circuit.
What accessories are available?
Auxiliary contacts, timers, interlocks or other accessories depend on the series and variant. Confirm the compatible accessory list before ordering.
How should a contactor be commissioned?
Verify terminal torque, coil voltage, contact sequence, insulation and operating current, then record the test results.
Confirm the Right CQC6 Configuration
Send the exact model, operating conditions, quantity, destination market and required documents. CHAC will review the request against the published product data.
