Caixa de Distribuição da Série CQMG20C
O Caixa de Distribuição da Série CQMG20C is a CHAC distribution box for organized circuit distribution and termination. The page keeps the model-specific technical table and original product images so buyers can verify voltage, current, configuration, mounting and applicable standards before ordering. Final suitability depends on the complete circuit, installation method and destination-market rules.
Visão Geral do Produto
CQMG20C Series Distribution Box is a distribution box intended for organized circuit distribution and termination. The current product record identifies it for residential, commercial and light-industrial panels. Use the exact model variant and preserved technical source as the basis for procurement rather than assuming that every family member has the same rating.
Verified source summary: Type Designation Product Name Model Box Base Dimensions (mm) Sheet Metal Thickness (mm) (Single Row) Glass Panel Power Distribution Box 15-18 positions 260×391×100 1.1 (Single Row) Glass Panel Power Distribution Box 18-22 positions 260×463×100 1.1 (Double Row) Glass Panel Power Distribution Box 32-36 positions 400×391×100 1.1 (Double Row) Glass Panel Power Distribution Box 48-52 positions 540×391×100 1.1 (Combined Po
Principais Características
Aplicações Típicas
Typical use can include residential, commercial and light-industrial panels when the project confirms system voltage, current, fault or surge exposure, conductor and enclosure requirements, and the selected variant’s installation instructions. This page does not replace the project design or the authority having jurisdiction.
Guia de Candidaturas e Seleção
Use the following decision points with the preserved model data. Product-family descriptions explain intent, but the exact technical table controls the ordered variant.
| Ponto de seleção | Caixa de Distribuição da Série CQMG20C | O que o projeto deve confirmar |
|---|---|---|
| Aplicação | Distribution Box projects | Confirm the actual system and environment |
| Selection basis | organized circuit distribution and termination | Use the exact model and technical table |
| Instalação | Follow the model instructions | Check mounting, clearances and termination |
| Compliance | Use the listed standard where applicable | Verify edition, scope and destination rules |
| Adjacent product | Evaluate the related CHAC family where function differs | Do not substitute without engineering review |
Function
organized circuit distribution and termination
Match the protection or switching function to the system.
Configuração
Model-specific options
Confirm current, voltage, poles, terminals or accessories from the table.
Instalação
Mechanical and electrical fit
Check enclosure, mounting, wiring space and maintenance access.
Project evidence
Documents and test records
Retain the approved drawing, technical sheet and commissioning record.
Guia de Encomenda
- State the exact model and variant.
- Provide the system voltage, current, frequency and load or protection function.
- Confirm mounting, terminals, accessories, enclosure and environmental conditions.
- Share quantity, destination market and required technical documents.
Verificações de Instalação e Coordenação
- Verify the model’s ratings and connection arrangement against the project drawings.
- Check conductor, busbar, enclosure, clearances and tightening requirements using the product documentation.
- Coordinate upstream and downstream protection or control devices where applicable.
- Use qualified personnel for installation, testing, isolation and maintenance.
Type Designation
| Product Name | Modelo | Box Base Dimensions (mm) | Sheet Metal Thickness (mm) |
| (Single Row) Glass Panel Power Distribution Box | 15-18 positions | 260×391×100 | 1.1 |
| (Single Row) Glass Panel Power Distribution Box | 18-22 positions | 260×463×100 | 1.1 |
| (Double Row) Glass Panel Power Distribution Box | 32-36 positions | 400×391×100 | 1.1 |
| (Double Row) Glass Panel Power Distribution Box | 48-52 positions | 540×391×100 | 1.1 |
| (Combined Power & Weak Current) Glass Panel | 14-20 positions | 500×427×100 | 1.1 |
| (Combined Power & Weak Current) Glass Panel | 20-26 positions | 500×535×100 | 1.1 |
| (Information Box) Glass Panel Weak Current Box | 300×400 | 300×400×110 | 1.1 |
Porquê escolher a CHAC
Com mais de 30 anos de experiência em fabrico, mais de 1100 funcionários, mais de 100 milhões de postes
Com uma capacidade anual e um processo de produção automatizado 90%, a CHAC garante uma capacidade de produção estável e rigorosos
Controlo de qualidade para clientes OEM/ODM globais. O nosso sistema de fabrico interno suporta a longo prazo
cooperação para marcas elétricas, importadores e distribuidores.
30+
ANOS DE EXPERIÊNCIA
Especializado em fabrico de baixa tensão elétrica
1100+
FUNCIONÁRIOS
Equipa profissional garante qualidade e entrega estáveis
100M+
CAPACIDADE ANUAL DE POSTOS
Capacidade de produção em larga escala para satisfazer a procura global
90%
PRODUÇÃO AUTOMATIZADA
Automação avançada para alta eficiência e consistência
Linha de Montagem Automatizada
Laboratório de Ensaios
Injeção e Estampagem
Inspeção de Qualidade
Um rigoroso sistema de controlo de qualidade garante que cada produto cumpre as normas globais.
O que podemos personalizar?
Flexible customization services are available for enclosure dimensions, component configuration,
branding and project requirements.
Recinto
Design
Tamanhos de caixas personalizadas, estruturas e detalhes de instalação.
Interno
Configuração
Layout interno flexível e opções de arranjo de componentes.
Branding &
Logótipo
Logótipos de marca própria, placas de identificação e identificação da marca.
Embalagem
Design
Caixas personalizadas, etiquetas, manuais e soluções de embalagem.
Elétrico
Configuração
Instalação elétrica à medida com base nos requisitos da aplicação.
Certificação
Apoio
Apoio a normas e requisitos de conformidade do mercado-alvo.
Transferir
Outros Produtos
Visão geral completa de componentes elétricos de baixa tensão e referência para seleção de produtos.
Precisa de Documentos Técnicos?
Contacte-nos para folhas de dados, certificados, desenhos, orientação de seleção ou suporte a projetos OEM/ODM.
CQMG20C Product FAQ
What is the CQMG20C distribution box for?
It organizes and protects outgoing circuits in the application context shown by the product record. Confirm capacity, mounting and enclosure requirements.
How do I choose the box size?
Count modules or circuits, allow wiring and heat-dissipation space, and check the exact dimensions, cover and mounting method for the selected model.
Surface or flush mounting?
Use the mounting option published for the series and verify wall depth, fixing points and maintenance access.
Can it combine power and data?
Some distribution-box variants include dedicated power and weak-current or data arrangements. Confirm the exact model layout before ordering.
What protection rating applies?
Use the rating stated for the exact enclosure and installation condition. Knockout removal, cover fit and cable entries can change the effective protection.
What should be included in an order?
Provide model, size or module count, mounting type, color, quantity, destination market and required drawings or packaging details.
Confirm the Right CQMG20C Configuration
Send the exact model, operating conditions, quantity, destination market and required documents. CHAC will review the request against the published product data.
