CQB2-125 Brevetto di sicurezza per circuiti chiusi
Il Interruttore automatico in miniatura CQB2-125 È progettato per la protezione da sovraccarico e cortocircuito nei circuiti di distribuzione in corrente alternata a elevata intensità. È disponibile nelle configurazioni 63A, 80A, 100A e 125A, con curve di intervento C o D e configurazioni 1P, 2P, 3P o 4P. La serie ha una capacità di interruzione massima in caso di cortocircuito di 10kA ed è conforme alla norma IEC 60947-2. Selezionare la configurazione in base alla progettazione del circuito, alla corrente di guasto prevista, ai requisiti dei conduttori e al mercato di destinazione.
Riassunto del prodotto
Il CQB2-125 è un interruttore miniaturizzato CA ad alta corrente per circuiti di distribuzione commerciali, leggermente industriali e infrastrutturali che richiedono protezione da sovraccarico e cortocircuito. È disponibile nelle versioni 63A, 80A, 100A e 125A, con curve di scatto C o D e configurazioni 1P, 2P, 3P o 4P. La serie offre valori di cortocircuito Icu 10kA e Ics 7.5kA ed è progettata secondo le norme IEC 60947-2 e GB/T 14048.2.
La selezione deve basarsi sulla corrente di progetto, sulla capacità del conduttore, sulla disposizione dei pali, sull'irruzione di carico, sulla corrente di corto circuito presunta e sui requisiti del mercato di destinazione. Il CQB2-125 è un prodotto AC e non deve essere considerato un sostituto di un interruttore DC, di un RCBO con protezione da corrente residua o di un MCCB richiesto per la protezione regolabile e per i più elevati livelli di fault.
Principali caratteristiche
Applicazioni tipiche
Il CQB2-125 può essere valutato per la protezione dei circuiti di alimentazione e dei derivati a corrente più elevata in quadri elettrici commerciali, nella distribuzione di edifici alti, in quadri leggeri industriali e nelle apparecchiature infrastrutturali. È adatto solo quando la corrente selezionata, la curva, la configurazione dei poli e le capacità di interruzione dei cortocircuiti corrispondono allo studio del circuito. Per i circuiti fino a 63A, confrontare il CQB2-63; qualora siano richieste regolazioni o un grado di intervento più elevato, rivedere il Gamma di MCCB.
Modulazioni e Guida alla selezione
| Elemento selezionabile | Come valutarlo | Opzioni CQB2-125 |
|---|---|---|
| Corrente nominale | Confermare la corrente di progetto, la capacità del conduttore, il metodo di installazione, la temperatura ambiente, il raggruppamento e il coordinamento. Non selezionare 125A solo perché è la portata più elevata disponibile. | 63A, 80A, 100A, 125A |
| Curva di intervento | Confrontare la corrente di funzionamento normale, la corrente di spunto o di inserzione e il livello della corrente di guasto necessario per un azionamento magnetico tempestivo. | C o D |
| Numero di poli | Abbinare il sistema di alimentazione e determinare quali conduttori attivi devono essere interrotti e protetti insieme secondo le norme del progetto. | 1P, 2P, 3P, 4P |
| Dovere di cortocircuito | Verificare che la corrente di corto circuito prevista e il coordinamento delle protezioni rientrino nei limiti delle caratteristiche nominali del dispositivo nel punto di installazione. | Icu 10kA; Ics 7.5kA |
| Standard e documenti | Verificare la norma di prodotto, le regolamentazioni del mercato di destinazione e i documenti specifici richiesti dal cliente o dall’ente di certificazione. | IEC 60947-2; GB/T 14048.2; CCC confermato |
Confronta la gamma attuale, la capacità di interruzione, le curve di scatto, le configurazioni dei poli e le funzioni di protezione prima di selezionare un interruttore automatico miniaturizzato CQB2-125.
6kA vs 10kA MCB
Selezionare la capacità di interruzione in base alla corrente di corto circuito prevista nel punto di installazione, e non solo in base alla corrente nominale del circuito.
Curva C vs Curva D
Selezionare la curva di intervento in base alle caratteristiche di spunto del carico e alla corrente di guasto disponibile, e non esclusivamente in base alla corrente nominale.
1P vs 2P vs 3P vs 4P
Scegliere la configurazione dei poli in base alla disposizione dell’alimentazione e alle esigenze di commutazione o isolamento comune, e non soltanto in base allo spazio disponibile nel quadro.
MCB vs RCBO
Un interruttore magnetotermico protegge da sovraccarichi e cortocircuiti, mentre un interruttore differenziale magnetotermico offre anche una protezione contro le correnti di guasto a terra.
Need Help Selecting a CQB2-125 Configuration?
Share the rated current, pole configuration, tripping curve, system voltage, available fault-current information and quantity. CHAC will review the requested configuration and applicable documents.
CQB2-125 Ordering Guide
| Informazioni richieste | Buyer selection |
|---|---|
| Product series | CQB2-125 |
| Corrente nominale | 63A / 80A / 100A / 125A |
| Numero di poli | 1P / 2P / 3P / 4P |
| Curva di intervento | C / D |
| Project details | System voltage, application and available fault-current information |
| Commercial details | Quantity, destination market, marking, packaging and required documents |
Installation Details to Confirm
How to Choose Between C and D Curves
C and D curves respond differently to short-duration inrush current. C curve is commonly evaluated for general distribution loads with moderate inrush, while D curve may be considered for equipment with higher starting current. These are selection tendencies, not universal assignments. Confirm that the chosen curve tolerates normal starting current while still providing the required fault protection and disconnection time.
How to Choose the Pole Configuration
Select 1P, 2P, 3P or 4P from the actual supply and isolation requirements. The design must identify which conductors require protection and common switching. Neutral treatment, earthing arrangement and local rules vary, so the pole configuration should be confirmed against the project drawings rather than selected from enclosure space alone.
When a 10kA MCB Is Required
The 10kA Icu value describes the rated ultimate short-circuit breaking capacity, not the normal load current. Use CQB2-125 only when the prospective short-circuit current, Ics requirement and protection coordination are within its published ratings. Where the required duty exceeds these values, select a suitably rated protective device or a verified coordinated solution.
CQB2-125 Type Designation

CQB2-125 C and D Tripping Curves

CQB2-125 Dimensions (mm)

Specifiche tecniche
Use the table below to confirm voltage, rated current, poles, tripping curve, short-circuit duty, service life, protection degree, standard and certification for the CQB2-125 series. Final selection must be checked against the complete circuit design.
| Parametro | CQB2-125 |
| Tensione nominale (V) | AC230V, AC400V |
| Corrente nominale (A) | 63A, 80A, 100A, 125A |
| Numero di poli | 1P, 2P, 3P, 4P |
| Curvature pericolose | C, D |
| Rated short-circuit breaking capacity Icu (A) | 10000 A |
| Rated service short-circuit breaking capacity Ics (A) | 7500 A |
| Rated impulse withstand voltage Uimp (V) | 4000 V |
| Vita meccanica | ≥ 8500 operations |
| Durata elettrica | ≥ 1500 operations |
| Grado di protezione | IP20 |
| Standard | IEC 60947-2, GB/T 14048.2 |
| Certificazione | CCC |
CQB2-125 Tripping Characteristics at 30°C Reference Temperature
| Oggetto | Curva di intervento | Test current ln(A) | Status iniziale | Termine per l’attivazione o l’inattivazione | Risultato previsto | Commenti |
| a | C、D | 1.05ln | Freddo | 1h(In≤63A) | Non-tripping | La corrente aumenta gradualmente fino al valore specificato in 5 secondi |
| b | C、D | 1.3ln | Seguendo l'articolo a) il test | 2h(ln>63A) | Innamorarsi | |
| c | C、D | 2ln | Freddo | 1h(ln≤63A) | Innamorarsi | |
| d | C | 8ln×80% | Freddo | 2h(In>63A) | Non-tripping | Accendere l'alimentazione elettrica chiudendo il selettore ausiliario |
| D | 12ln×80% | 1s<t<300s | ||||
| e | C | 8In×120% | Freddo | t≤0,2 s | Innamorarsi | Accendere l'alimentazione elettrica chiudendo il selettore ausiliario |
| D | 12ln×120% | t<0.2s |
Test note: “Cold” means the test is carried out at the reference calibration temperature without load before the test.
Reference Copper Conductor Cross-Sections
| Sottotensione della sezione trasversale del cavo (mm²) | Corrente nominale In(A) |
| 16 | 63A |
| 25 | 80A |
| 35 | 100A |
| 50 | 125A |
Conductor note: These cross-sections are CQB2-125 product references. Final conductor sizing must follow the project design, installation method, ambient temperature, grouping, voltage-drop requirements and applicable local rules.
Perché scegliere CHAC
CQB2-125 production is supported by CHAC’s low-voltage manufacturing, assembly and quality-control system. Incoming components, assembly processes, operating checks and final inspection are managed against the approved product specification. The company-scale figures below describe CHAC’s overall manufacturing capability rather than a separate performance claim for this model.

30+
ANNI DI ESPERIENZA
Low-voltage product engineering and manufacturing experience

1100+
L'EMPLOYATI
Production, engineering and quality teams support project execution

100 milioni di persone
Capacità annuale delle stazioni
Company-wide annual pole capacity across supported product ranges

90%
PRODUZIONE AUTOMATIZZATA
Automated processes support repeatable assembly and inspection

Linea di assemblaggio automatizzata

Laboratorio di test

Iniezione e stampaggio

Ispezione di qualità





Quality records and applicable product documents can be supplied for the confirmed CQB2-125 configuration. Certification and market-approval availability must be verified for the selected model.
Cosa possiamo personalizzare?
For CQB2-125 projects, CHAC can assess private-label marking, packaging, appearance, existing electrical configurations and technical-document requirements. Requests outside the published product range, including new electrical ratings or market approvals, are subject to engineering evaluation, testing and project feasibility.
Logo e branding
Private-label marking and nameplate options are available subject to artwork review and sample approval.

Imballaggio
Personalizzazione
Color boxes, cartons, labels and manuals can be prepared for the destination market and approved order specification.

Elettrico
Personalizzazione
Select from the published 63–125A, 1P–4P and C/D options; requests outside this range require technical evaluation.

Prodotti
Apparizione
Housing, handle and appearance options can be reviewed subject to tooling, MOQ and technical feasibility.

Certificazione
Supporto
Sono forniti fogli di dati tecnici, disegni e informazioni relative al certificato verificato per la configurazione approvata applicabile.

Ingegneria
Sviluppo
Project support can include drawing review, sample evaluation, testing and production planning, subject to technical approval.

Scarica
Interruttore di circuito miniaturizzato della serie CQB2
Download the CQB2 series overview for product selection reference. Confirm that each specification and document applies to the CQB2-125 configuration requested for your project.
Need CQB2-125 Technical Documents?
Request the applicable datasheet, drawings, verified certificate information, selection support or OEM/ODM project review.
CQB2-125 Miniature Circuit Breaker FAQ
Q1. What does 10kA mean on the CQB2-125 miniature circuit breaker?
The CQB2-125 has a rated ultimate short-circuit breaking capacity (Icu) of 10,000A and a rated service short-circuit breaking capacity (Ics) of 7,500A. The 10kA marking does not make the breaker suitable for every installation. The prospective short-circuit current at the installation point and the complete protection design must be checked before selection.
Q2. How do I choose between a C curve and D curve MCB?
Choose the curve according to the load’s inrush characteristics and the required protection coordination. C curve is commonly evaluated for general distribution loads with moderate inrush, while D curve may be considered for loads with higher starting current. The correct choice depends on the actual load and system study, not on rated current alone.
Q3. What is the difference between Icu and Ics?
Icu is the rated ultimate short-circuit breaking capacity. Ics is the rated service short-circuit breaking capacity and indicates the short-circuit duty after which the breaker is expected to remain suitable for continued service under the applicable test conditions. For CQB2-125, the listed values are 10kA Icu and 7.5kA Ics.
Q4. Can the CQB2-125 be used as a 125A DC circuit breaker?
No. The specifications on this page describe an AC 230/400V product. AC and DC interruption duties are not interchangeable. Use a breaker that is specifically rated and verified for the intended DC system when DC protection is required.
Q5. What cable size is required for a 125 amp circuit breaker?
The CQB2-125 product reference table pairs 125A with a 50mm² copper conductor; it also lists 16mm² for 63A, 25mm² for 80A and 35mm² for 100A. These are product references, not universal wiring rules. Final conductor sizing must account for installation method, temperature, grouping, voltage drop, conductor material and local electrical requirements.
Q6. When should I choose a 125A MCB instead of a 63A MCB or MCCB?
Consider CQB2-125 when the circuit design requires a 63A to 125A modular AC breaker and its fixed C or D curve, 10kA Icu and other listed characteristics meet the project. For lower-current circuits, a 63A-range MCB may be more appropriate. If adjustable protection, higher fault duty or more advanced coordination is required, evaluate an MCCB. The final decision should be made from the complete system study.
Build the Right CQB2-125 Configuration for Your Project
Send the required current rating, C or D curve, pole configuration, system voltage, destination market and estimated quantity. CHAC will review the specification and provide the applicable technical documents and commercial proposal.











