PXB6LE-63 Circuit Breaker Elektronik Residual Current dengan Proteksi Overcurrent
RCBO elektronik CHAC PXB6LE-63 menggabungkan perlindungan atas beban, arus pendek, dan arus sisa dalam satu perangkat. Pilih dari empat susunan kutub, kurva B/C/D, dan sensitivitas Tipe AC/A yang sesuai dengan rangkaian, dengan arus pengenal mulai dari 6A hingga 63A.
Gambaran Produk
CHAC PXB6LE-63 RCBO elektronik Menggabungkan proteksi arus lebih dan proteksi arus bocor. Pilih deteksi Tipe AC atau Tipe A, sensitivitas arus bocor yang diperlukan, serta kurva arus lebih B/C/D sebagai rincian pemesanan terpisah.
Bagi para importir, distributor, dan produsen peralatan, CHAC dapat meninjau konfigurasi yang diminta sesuai dengan persyaratan sirkuit serta dokumen pasar tujuan. Pastikan kesepakatan mengenai model yang tepat, gambar teknis, dan persyaratan penandaan sebelum persetujuan sampel atau pemesanan ulang.
Poin-Poin Pilihan Utama
Aplikasi Biasa
Pertimbangkan PXB6LE-63 untuk sirkuit akhir AC yang memerlukan perlindungan terhadap kebocoran arus bumi dan arus lebih. Pemilihan tipe bergantung pada elektronik beban, bentuk gelombang gangguan yang diperkirakan, dan peraturan instalasi; nilai arus atau sensitivitas tertinggi tidak otomatis merupakan pilihan yang tepat.
Permohonan dan Panduan Pemilihan
| Item seleksi | Konfigurasi PXB6LE-63 | Hal yang harus diverifikasi |
|---|---|---|
| Arus pengenal | 6–63A | Sesuaikan beban dengan kapasitas arus konduktor, termasuk suhu dalam kotak persimpangan dan pengelompokan kabel. |
| Kutub dan tegangan | 1P+N / 2P: 240V AC; 3P+N / 4P: 415V AC | Konfirmasikan pengaturan pemutusan netral dan proteksi yang diperlukan. |
| Proteksi arus sisa | Ketik AC atau A; 10/30/50/100/300mA | Tentukan jenis deteksi dan sensitivitas secara terpisah dari arus pengenal. |
| Overcurrent characteristic | B/C/D; listed Ics 6000A | Coordinate inrush and fault level rather than changing curve solely to avoid trips. |
Use these checks to compare the protection function, configuration and related CHAC products before specifying PXB6LE-63. Related products are selection alternatives or system components, not automatic replacements.
Specify the leakage type separately from the trip curve
Type A describes the residual-current waveform coverage; a C curve describes the overcurrent trip characteristic.
Investigate leakage before increasing sensitivity settings
Repeated residual-current trips may come from insulation defects, accumulated equipment leakage or wiring errors.
Compare PXB6Ln-40 for the required function
RCBO elektronik CHAC PXB6Ln-40 menggabungkan perlindungan arus lebih dan arus sisa dalam konfigurasi ringkas 1P+N. Perangkat ini tersedia dengan rating 6–40A, kurva B/C, serta opsi Tipe AC/A untuk sirkuit yang beroperasi pada tegangan 230/240V AC.
Compare PXB6LE-63B for the required function
CHAC PXB6LE-63B electronic RCBO menggabungkan perlindungan overload dan short-circuit dengan perlindungan arus sisa Type B. Tersedia dalam rating 6–63A dan konfigurasi empat kutub, produk ini menawarkan kurva B/C/D serta sensitivitas arus sisa dari 30mA hingga 300mA.
Need Help Specifying PXB6LE-63?
Send the circuit requirements, selected configuration, destination market and quantity for a model-specific review.
Specify the leakage type separately from the trip curve
Type A describes the residual-current waveform coverage; a C curve describes the overcurrent trip characteristic. An order such as Type A, C curve still needs a rated current, sensitivity and pole arrangement. Keeping these fields separate prevents ambiguous distributor orders.
Investigate leakage before increasing sensitivity settings
Repeated residual-current trips may come from insulation defects, accumulated equipment leakage or wiring errors. A higher mA threshold is not a routine cure. Have the circuit assessed and select protection that still meets the application and local requirements.
How to Specify a PXB6LE-63 Order
Use the configuration details below in the purchase specification. Keep the approved drawing revision and product identification with the order so repeat deliveries can be checked consistently.
| Rincian pesanan | Information to include |
|---|---|
| Arus pengenal | 6–63A — Match the load and conductor ampacity, including enclosure temperature and grouping. |
| Kutub dan tegangan | 1P+N / 2P: 240V AC; 3P+N / 4P: 415V AC — Confirm the required neutral-switching and protection arrangement. |
| Proteksi arus sisa | Type AC or A; 10/30/50/100/300mA — Specify detection type and sensitivity independently from rated current. |
| Overcurrent characteristic | B/C/D; listed Ics 6000A — Coordinate inrush and fault level rather than changing curve solely to avoid trips. |
| Project and documents | Supply the application, installation conditions and destination-market document requirements. |
| Quantity and identification | State the quantity, sample requirement, packaging language and any proposed branding; confirm feasibility before approval. |
Check Installation Fit Before Approval
Spesifikasi Teknis
| Parameter | |
| Tegangan Terukur (V) | 240V~(1P+N、2P)/415V~(3P+N、4P) |
| Arus Pengenal (A) | 6、10、16、20、25、32、40、50、63 |
| Jumlah Tiang | 1P+N、2P、3P+N、4P |
| Rated Short-Circuit Breaking Capacity Ics(A) | 6000A |
| Rated Residual Operating Current IΔn(mA) | 10、30、50、100、300 |
| Rated Residual Non-Operating Current IΔno(mA) | 0.5IΔn |
| Rated Residual Make and Break Capacity IΔm(A) | 3000A |
| Residual Current Tripping Threshold | ≤0.1s |
| Residual Current Trip Type | AC Type、A Type |
| Ketahanan Mekanis | ≥6000 |
| Daya Tahan Listrik | ≥4000 |
| Kurva tripping | B, C, D |
| Pollution Degree | 2 |
| Kelas Proteksi | IP 20 |
| Kategori Instalasi | Ⅲ |
| Standar | IEC61009-1, GB/T16917.1 |
| Sertifikasi | CE CB CCC|DEKRA Certified |
Tripping Characteristics (Reference Temperature: 30℃)
| Item | Kurva Tripping | Arus Uji (A) | Status Awal | Batas waktu untuk tripping atau tidak tripping | Hasil yang diharapkan | Komentar |
| Delay | ≤63 | Dingin | 1.13In | ≤1h | Tidak tersandung | |
| Delay | ≤63 | Following previous test | 1.45In | ＜1h | Tersandung | Current smoothly rises to specified value in 5s |
| Delay | ≤32 | Dingin | 2.55In | 1＜t＜60s | Tersandung | |
| Delay | >32 | Dingin | 2.55In | 1＜t＜120s | Tersandung | |
| Instantaneous | Any value | Dingin | 3、5、10In | ≤0.1s | Tidak tersandung | B, C, D |
| Instantaneous | Any value | Dingin | 5、10、20In | ＜0.1s | Tersandung | B, C, D |
Catatan: Istilah “dingin” berarti pengujian dilakukan pada suhu kalibrasi referensi tanpa beban sebelum pengujian.
Persyaratan konduktor dan bagian penampang
| Copper cross-section(mm²) | Arus pengenal In(A) |
| 1 | In≤6 |
| 1.5 | 6＜In≤13 |
| 2.5 | 13＜In≤20 |
| 4 | 20＜In≤25 |
| 6 | 25＜In≤32 |
| 10 | 32＜In≤50 |
| 16 | 50＜In≤63 |
Penamaan tipe
Kurva tripping
Dimensi (mm)
Mengapa Memilih CHAC
CHAC Electric supplies electrical protection and control products for importers, distributors and equipment brands. For PXB6LE-63, agree the configuration, technical documents, approved sample and identification requirements before production. The company facilities shown below provide company context, not a claim that every model uses the same production or test process.
01
KONFIRMASI SPESIFIKASI
Agree the PXB6LE-63 configuration, circuit duty and installation requirements.
02
TINJAU DOKUMEN-DOKUMEN
Konfirmasikan gambar yang spesifik untuk model dan persyaratan pasar tujuan.
03
SETUJUI SAMPEL
Catat konfigurasi yang diterima dan persyaratan penandaan.
04
TENTUKAN CEK PESANAN
Setujui persyaratan pengemasan, identifikasi, dan pengiriman dalam penawaran.
Barisan Perakitan Otomatis
Laboratorium Pengujian
Injeksi & Stamping
Pemeriksaan Kualitas
Apa yang Dapat Kami Sesuaikan?
Discuss PXB6LE-63 product identification, packaging and documentation with CHAC. Each proposed change is subject to technical feasibility, marking rules and approval of the exact order; no altered rating or certification is implied.
Logo & Branding
Kirimkan karya seni logo dan persyaratan penandaan untuk ditinjau sesuai dengan area cetak yang tersedia serta penandaan produk wajib.
Kemasan & Manual
Tentukan label karton, bahasa pada kemasan, identifikasi produk, serta persyaratan instruksi untuk pasar tujuan.
Pemilihan Konfigurasi
Specify PXB6LE-63 with the required rated current, operating conditions and protection duty. Confirm the complete order combination.
Assembly Requirements
Provide the mounting and connection requirements for review. Changes to the housing, terminals or operating arrangement require engineering approval.
Dokumentasi Pasar
Request documents covering the exact PXB6LE-63 model and destination market. A standard reference alone is not evidence of certification.
Persetujuan Sampel
Setujui spesifikasi sampel, revisi gambar, dan kriteria penerimaan sebelum memastikan pesanan produksi.
Dokumen Teknis dan Dukungan
PXB6LE-63 Technical Documents
Request the PXB6LE-63 datasheet, configuration drawing, installation instructions and available model-specific market documents.Minta Lembar Data
Butuh Dokumen Teknis?
Send the application, electrical requirements, assembly layout and destination market for configuration and document review.Hubungi Kami
PXB6LE-63 Product FAQ
What is the difference between Type A and Type AC RCBOs?
Type AC is intended for sinusoidal AC residual currents, while Type A also covers specified pulsating DC residual currents. PXB6LE-63 offers both options. Select for the connected equipment and local rules, not simply the lower purchase price.
Does a Type A RCBO mean it has a B or C tripping curve?
No. Residual-current type and overcurrent curve are separate specifications. PXB6LE-63 offers Type AC/A detection with B/C/D curves; state both in the order.
Is a 100mA RCBO a direct substitute for a 30mA RCBO?
Not automatically. The sensitivity changes the residual-current protection level and may no longer satisfy the circuit requirements. Confirm the application and local rules before substituting any sensitivity.
How should I choose the PXB6LE-63 residual-current sensitivity?
Select the mA rating from the circuit purpose, equipment instructions and local requirements. Rated current in amperes is a separate specification. Confirm the exact PXB6LE-63 sensitivity variant and its operating-time data rather than using a larger threshold to mask recurring trips.
Why can a PXB6LE-63 installation trip repeatedly?
Possible causes include insulation faults, accumulated equipment leakage, incorrect neutral connections or an unsuitable protection type. Have a qualified person investigate the circuit and follow the device test instructions before changing the rating or replacing protection.
What should an importer include in a PXB6LE-63 inquiry?
Specify poles, AC supply, rated current, residual-current type and sensitivity, plus the overcurrent curve if ordering an RCBO. Add the destination market, required documents, quantity and marking requirements so the quotation identifies the exact configuration.
Specify the Right PXB6LE-63 Configuration
Send CHAC your required configuration, application, destination market and estimated quantity. We will review the requested specification and provide the relevant technical documents and commercial proposal.
