Normal load
Current remains within the selected operating characteristics.
CHAC Electric · MCB Manufacturer
CHAC supplies miniature circuit breakers for panel builders, distributors and electrical brands. Compare series by current, poles, trip curve and breaking capacity, then discuss bulk supply or OEM requirements.
A mini circuit breaker, or miniature circuit breaker (MCB), protects a circuit against overload and short-circuit current within its stated ratings.
It does not, by itself, provide residual-current protection. Where earth-leakage protection is required, review the appropriate RCCB and MCB arrangement or an RCBO.
Current remains within the selected operating characteristics.
The device responds according to its time-current characteristic.
Operation depends on the fault conditions and the device’s applicable ratings.
CHAC mini circuit breakers provide overload and short-circuit protection for residential, commercial and OEM distribution applications. Our miniature circuit breaker range can be selected by rated current, pole configuration, tripping curve and breaking capacity to match different final-circuit requirements.

















Compare three CHAC series by current, poles, trip curve and short-circuit rating.
| Selection factor | PXB6-40View this series → | CQB2-63View this series → | CQB2H-63View this series → |
|---|---|---|---|
| Selection focus | 1P+N circuits | 6kA Icn requirements | 10kA Icn requirements |
| Rated current | 6–40A | 6–63A | 6–63A |
| Number of poles | 1P+N | 1P / 1P+N / 2P / 3P / 3P+N / 4P | 1P / 2P / 3P / 4P |
| Trip curves | B / C / D | B / C / D | B / C / D |
| Short-circuit rating | 4.5kA · Icn = Ics | 6kA · Icn = Ics | 10kA · Icn |
| Product standard | IEC 60898-1 | IEC 60898-1 | IEC 60898-1 |
| Series catalogue | PXB6 Series Catalogue ↗ | CQB2 Series Catalogue ↗ | CQB2 Series Catalogue ↗ |
Confirm the operating voltage, pole arrangement and available fault current before selecting a series.
Share your circuit requirements with CHAC for help choosing an MCB series.
Match your circuit requirements to the MCB rating, trip curve and panel layout.
Match the MCB rating to the design load and cable capacity, allowing for temperature and grouping.
Check load inrush and the fault current needed to meet the required disconnection time.
Check the short-circuit rating at your system voltage against the available fault current.
Choose the protected and switched conductors for your supply system and neutral requirements.
Check dimensions, terminal access and busbar connections for the selected model.
Confirm the model, destination market and required drawings, certificates or test reports.
Compare PXB6-63 and CQB2-63 for these current options. Select the current rating for the load and conductor capacity, allowing for temperature and grouping.
6A, 10A and 16A options. Both series list these ratings. Include the pole arrangement and B, C or D trip curve when requesting a quote.
20A, 25A and 32A options. These ratings are also available in both series. For a 32A MCB, check load inrush and the required trip curve as well as the current rating.
40A, 50A and 63A options. Both series extend to 63A. For a 63A MCB order, confirm terminal access, panel space and the applicable breaking rating at the system voltage.
Use the load, switching arrangement and fault level to narrow your choice before checking the technical data.
Start with the circuit load and fault level, then review CQB2-63 current and pole options.
Review CQB2-63 specifications →For a 1P+N requirement, review PXB6-40 and confirm which conductors need protection and disconnection.
Review PXB6-40 specifications →Check CQB2H-63 at the required operating voltage and review coordination with upstream protection.
Review CQB2H-63 specifications →For an 80A, 100A or 125A requirement, check CQB2-125 cable, terminal and panel-space requirements.
Review CQB2-125 specifications →Find trip curves, installation dimensions and catalogues for your CHAC MCB series.
Review the PXB6 family information alongside the selected model page. Request the applicable drawing and document revision before sample approval.
Open series catalogue ↗Compare the CQB2 series information, then check the exact current, pole, curve and short-circuit rating required for your order.
Open series catalogue ↗Request the current datasheet, drawing and destination-market documents for the exact model and configuration.
Request the document package →CHAC has manufactured low-voltage electrical products since 1995. Our facilities include assembly equipment, a testing laboratory and quality inspection equipment.



CHAC is a miniature circuit breaker supplier for distributors, panel builders and electrical brands. Choose an existing series for private-label supply, or discuss a new design through a separate ODM review.

Customization scope, minimum order quantity and lead time depend on the agreed project.
Help MCB suppliers quote the same product and supply scope. Include the electrical specification, quantities, branding brief and delivery terms.
Product packaging and brand presentationList the model, current, poles, curve, voltage and required short-circuit rating, including Icn, Icu or Ics where specified.
Give quantities by configuration, the destination market and any required standards, documents or inspections.
Specify CHAC branding or private label. For OEM orders, include artwork, label language and box or carton requirements.
State the trade term and named port or place, plus your required delivery date. CHAC will confirm timing for the order.
Read more about protection functions, pole arrangements and panel fit before confirming your specification.
Understand when overcurrent protection alone is insufficient and how the protection functions differ.
Read the guide →Review pole arrangements before specifying switching and isolation requirements.
Read the guide →Check physical dimensions, enclosure space and compatibility instead of relying on the rail format alone.
Read the guide →Answers to common questions about MCB ratings, protection functions and bulk supply.
Use the prospective short-circuit current at the installation point and the project protection study to establish the requirement. CQB2-63 has a 6kA rating, while CQB2H-63 has a 10kA Icn rating. Check the voltage, standard and exact configuration before comparing them; rated load current in amperes is a separate value.
Match the curve to load inrush and the fault current available for timely operation. A B curve MCB and a C curve MCB have different instantaneous trip characteristics, so equal current ratings do not make them interchangeable. Several CHAC series list B, C and D options; CQB2-125 lists C and D. Use the selected series’ curve data and the installation requirements.
Not necessarily. They may differ in which poles provide overcurrent protection and which conductors are switched. PXB6-40 is a 1P+N series; other series offer different pole arrangements. Confirm the supply system, neutral requirement and product diagram before specifying the order.
Do not assume either function. An MCB provides overload and short-circuit protection within its stated ratings. Evaluate an RCCB or RCBO arrangement when residual-current protection is required, and use a specifically rated DC device for a DC circuit. Check the individual product data.
Yes. CHAC supports OEM product marking and packaging for electrical brands, importers and distributors. New designs or changed electrical specifications require a separate ODM review.
Ask each MCB supplier to quote the same electrical specification, quantity and delivery terms. Check whether branding, packaging, samples and technical documents are included.
Share your model, quantities and destination market with CHAC to discuss supply and OEM requirements.