Check how overcurrent protection is provided
Identify the MCB or other device that will provide overload and short-circuit protection alongside the RCCB. If you need both functions in one device, consider an RCBO.
CHAC Electric · Residual-current protection
CHAC supplies three electromagnetic RCCB series for AC distribution systems. Compare current ratings, poles and sensitivity below, or send us your specification for a bulk order or private-label project.
A residual current circuit breaker (RCCB) provides leakage-current protection. It needs separate overload and short-circuit protection. Use the links below to compare series, work through selection or open the technical documents.
Explore the three electromagnetic RCCB series and open each product for its full specifications.
CHAC RCCBs provide residual-current protection for low-voltage electrical installations. Our residual current circuit breaker range supports residential, commercial and distribution applications where leakage-current protection is required, with selection based on rated current, poles, sensitivity and project requirements.





Start with the current range and pole arrangement. The table also shows where Type A options are listed. Dimensions and catalogues follow in the technical documents section.
| Selection factor | PXL6a-100Product details → | CQL14Product details → | PXL9-63Product details → |
|---|---|---|---|
| Rated current In | 25 / 40 / 63 / 80 / 100A | 25 / 40 / 63 / 80 / 100A | 6 / 10 / 16 / 20 / 25 / 32 / 40 / 50 / 63A |
| Poles / conductor arrangement | 2P / 4P | 1P+N / 3P+N | 2P / 4P |
| Rated voltage | 230 / 400V AC | 230 / 400V AC | 230 / 400V AC |
| Residual operating current IΔn | 30 / 100 / 300mA | 30 / 100 / 300mA | 30 / 100 / 300mA |
| Residual-current type | Type AC; Type A at 25 / 40 / 63A | Type AC; Type A at 25 / 40 / 63A | Type AC / A; specify the ordered configuration |
| Conditional short-circuit current Inc | 6000A — with specified protective coordination | 6000A — with specified protective coordination | 6000A — with specified protective coordination |
| Your configuration |
Once you have a series in mind, check these four points against the circuit design before specifying the device.
Identify the MCB or other device that will provide overload and short-circuit protection alongside the RCCB. If you need both functions in one device, consider an RCBO.
For a 2P RCCB or 4-pole device, establish which conductors must switch, including the neutral. For a 3-phase RCCB, check the supply and earthing arrangement before deciding on poles.
A 63A RCCB rating states the rated current. A 30mA RCCB rating states the residual-current sensitivity. Specify both. A 300mA RCCB does not replace a 30mA device where that level of additional protection is required.
The load and expected residual-current waveform determine which type to consider. Type AC and Type A describe detection characteristics. Electromagnetic describes how the device operates, not its waveform type.
Check the line and neutral arrangement, circuit current and required residual-current sensitivity.
Confirm whether the neutral is present, which conductors must switch and the required protective coordination.
Specify the expected residual-current waveform and applicable installation requirements before selecting the RCCB type.
State the model, poles, rated current, residual-current type, sensitivity and quantity.
Select a series to check mounting dimensions, residual-current operating data and the product catalogue.
Check the pole arrangement, installation space and terminal access against the drawing for your order.
For the 25–100A range with 30 / 100 / 300mA residual operating current.
| Residual current | IΔn | 2 × IΔn | 5 × IΔn |
|---|---|---|---|
| Breaking time (s) | 0.1 | 0.05 | 0.04 |
Review the model specifications, dimensions and ordering information for your required configuration.
Check the pole arrangement, installation space and terminal access against the drawing for your order.
For the 25–100A range with 30 / 100 / 300mA residual operating current.
| Residual current | IΔn | 2 × IΔn | 5 × IΔn |
|---|---|---|---|
| Breaking time (s) | 0.1 | 0.05 | 0.04 |
Review the model specifications, dimensions and ordering information for your required configuration.
Check the pole arrangement, installation space and terminal access against the drawing for your order.
Specify the residual-current type, sensitivity and any delay requirement for your order. CHAC can review the operating-time data and protective coordination for the configuration you need.
Review the model specifications, dimensions and ordering information for your required configuration.
Take a closer look at CHAC’s assembly facilities, testing laboratory and quality inspection. For a supplier assessment, ask us for the records that cover your selected model.



Looking for an RCCB supplier for your own brand? Discuss marking, packaging and product development with CHAC.

Choose an existing series for private-label supply, or discuss a development brief with CHAC. The scope and approval steps depend on the project.
RCCB price varies with the model, quantity, branding and delivery terms. Include the details below so suppliers can quote on the same basis.
Model, rated current In, sensitivity IΔn, poles and residual-current type.
System voltage, load, supply arrangement, destination market and documents needed.
Quantity for each configuration, repeat-order plans, logo artwork and packaging needs.
Destination and requested delivery date. For FOB, name the loading port; for other terms, specify the agreed port or place.
Attach a specification or bill of materials. For a private-label order, include your marking and packaging needs.
Read more about protection functions, device terminology and residual-current types.
Compare combined RCBO protection with an RCCB and separate overcurrent protection when planning a panel.
Read the guide →Understand the terms RCCB and ELCB, how residual-current protection works and what to check for the installation.
Read the guide →See how the residual-current waveform expected from the circuit affects the choice between Type AC and Type A.
Read the guide →Common questions about RCCB circuit breakers, rating differences and ordering from CHAC.
No. An RCCB provides residual-current protection and needs a suitable overcurrent protective device alongside it. An RCBO combines these functions in one device.
63A is the rated current In. 30mA is the rated residual operating current IΔn, or sensitivity. Both ratings apply to the same device, so include both when ordering.
A 2-pole RCCB and a 4-pole RCCB switch different conductor arrangements. Base the choice on the supply, neutral switching, earthing system and local installation rules. CQL14 uses the designations 1P+N and 3P+N.
Not where 30mA additional protection is required. The two sensitivities are not interchangeable. Select the sensitivity for the protection purpose, circuit leakage conditions and coordination with other devices.
PXL9-63 includes 16A. All three series list 25A and 63A. The current rating alone does not define the order: also specify poles, voltage, residual-current type and sensitivity.
PXL6a-100 and CQL14 list Type A at 25A, 40A and 63A. Ask CHAC to confirm availability before ordering Type A at 80A or 100A. For PXL9-63, include both the type and current in your enquiry.
The model, specification, quantity, branding and delivery terms. Use the quotation checklist above and compare offers for the same configuration, quantities and named delivery port or place.
Send the model or application, electrical specification, target market and quantity. Include your logo artwork and packaging needs. If you are still choosing a series, describe the circuit so CHAC can discuss the options with you.
Send your model and quantity, or describe the circuit if you need help choosing.
For an OEM & ODM project, tell us what you want to develop or supply under your brand.