
CHAC ELECTRIC ENGINEERING TOOLS
Electrical calculators
for low-voltage systems.
Calculate load current and cable size, review breaker and contactor ratings, and check distribution-board demand. For panel builders, installers and electrical engineers.
- 18 calculators
- Metric inputs
- Results with formulas
Common calculations
Start with the product you need.
Choose a CHAC product family to see the relevant calculations.
MCBs & RCBOs
Review breaker current, residual-current requirements, cable size and voltage drop before checking the exact product.

All calculators
18Choose a category or search by name.
kW to Amps Calculator
Convert kW to amps for three-phase, single-phase or DC loads. Enter voltage and power factor, or switch to kVA for apparent power.
Circuit Breaker Size Calculator
Calculate a reference circuit breaker size from load power, voltage, power factor and a sizing factor. Compare the result with MCB and MCCB product ratings.
RCD & RCBO Selection Guide
Review residual-current type and sensitivity, then compare circuit current, cable capacity, voltage and fault duty with entered RCD or RCBO ratings.
DC Circuit Breaker Sizing Calculator
Calculate DC design current and check an entered breaker against cable capacity, maximum source voltage, DC fault capability and pole-wiring confirmation.
Contactor Selection Calculator — AC-1 / AC-3
Estimate AC contactor current and compare three-phase AC-3 loads with CHAC CQC6 current and motor-kW tables at 230, 400 or 690 V.
Motor Current Calculator
Estimate motor full-load amps from shaft power in kW, voltage, efficiency and power factor. Check the estimate against the motor nameplate before selecting control gear.
Motor Starter Selection Calculator — DOL
Estimate three-phase DOL motor current and starting current, then compare CHAC CQC6 contactors and listed CQR2 overload relay ranges.
Cable Size Calculator — Copper/PVC
Size copper/PVC cables in mm² using corrected ampacity and resistive voltage drop. Covers three loaded conductors in air methods A1, A2, B1, B2 and C.
Voltage Drop Calculator
Calculate resistive cable voltage drop in volts and percent for single-phase, three-phase or DC circuits. Includes the voltage drop formula and a worked example.
Surge Protective Device (SPD) Type Guide
Compare a starting surge protective device type for AC or PV/DC circuits using supply exposure, lightning protection and installation point. Includes Type 1, 2 and 3 checks.
DC Voltage Drop Calculator
Calculate DC voltage drop for 12 V, 24 V, 48 V and other two-conductor circuits. Enter one-way cable length; the formula includes the return conductor.
Distribution Board Load Calculator
Electrical load calculator for distribution boards: estimate demand kW, kVA, feeder current and spare capacity for single- or balanced three-phase supplies.
Power Factor Correction Calculator
Estimate capacitor-bank compensation in kvar from active power and existing and target power factors. Includes the power factor correction formula and example.
Voltage Unbalance Calculator
Calculate three-phase voltage imbalance from three line-to-line RMS readings using the maximum deviation from average voltage. Includes the formula and an example.
Cable Short-Circuit Calculator
Estimate cable short-circuit withstand area with S = I√t/k using fault current, clearing time and a verified conductor k value. Compare with an installed conductor.
Busbar Calculator — Current-Density Estimate
Estimate a rectangular busbar current reference from area, assumed current density and a derating factor. Actual busbar ampacity requires temperature-rise verification.
Electricity Cost Calculator
Calculate electricity cost and kWh per day or month from power, operating hours and a flat tariff. Adjust quantity and average load factor for your equipment.
Ohm’s Law Calculator
Use the Ohm’s law formula to calculate DC current and resistive power from voltage and resistance. Includes I = V/R, P = V²/R and a 24 V worked example.
No matching calculators.
Try another term or clear the category filter.
Product ranges

Final distribution
MCBs, RCCBs, RCBOs, isolating switches, and surge protective devices for final circuits.
Explore the range
Power distribution
MCCBs, ACBs, distribution boxes, and junction boxes for commercial and industrial projects.
Explore the range
Industrial control
AC contactors, thermal overload relays, motor protection devices, and high-voltage DC contactors.
Explore the rangeNeed help choosing a CHAC product?
Send the system voltage, load current, and installation conditions with your inquiry.
